;
; See i2clib.asm for documentation of the interface to this file.
- include /usr/share/gputils/header/p18f458.inc
- radix dec
- include ../iwjpictest/insn-aliases.inc
+ include /usr/share/gputils/header/p18f458.inc
+ radix dec
+ include ../iwjpictest/insn-aliases.inc
-clock equ 0
- include ../iwjpictest/clockvaries.inc
- include panic.inc
- include morse+auto.inc
+ include ../iwjpictest/clockvaries.inc
+ include panic.inc
+ include morse+auto.inc
+ include i2clib.incm
;======================================================================
; NOTATION
udata_acs
-sspstat res 1
-sspcon1 res 1
+sspstat res 1 ; master only
+sspcon1 res 1 ; master only
sspcon2 res 1 ; master only
slave res 1 ; master only
slave_next res 1 ; master only
st_orig res 1
; st is a bitmask, bit set in visible states:
- ; master slave
-st_starting equ 7 ; Writing-Setup?,Reading-Busy?
-st_addressing equ 6 ; Writing-Setup?,Reading-Busy?
-st_writing equ 5 ; Writing-* [Idle-going-]Receiving
-st_subsequent equ 4 ; Writing? Receiving
-st_reading equ 3 ; Reading-* Transmit-*
-st_awaiting equ 2 ; Reading-Wait Transmit-Wait
-st_acking equ 1 ; Reading-Busy?,Stopping(from read)
+ ; master
+st_starting equ 7 ; Writing-Setup?, Reading-Busy?
+st_addressing equ 6 ; Writing-Setup?, Reading-Busy?
+st_writing equ 5 ; Writing-*, Stopping(after Reading-Wait:write_start)
+st_subsequent equ 4 ; Writing?
+st_reading equ 3 ; Reading-*
+st_awaiting equ 2 ; Reading-Wait
+st_acking equ 1 ; Reading-Busy?, Stopping(from read)
st_stopping equ 0 ; Stopping
; ...? means not always set in that state
;----------
improper_read_done_data
- panic morse_SD
+ i2cpanic morse_SD
;======================================================================
; MASTER
bt_f_if0 PIR1, SSPIF
return
; We have an interrupt:
-
+;...
+i2cm_interrupt_definite
mov_ff SSPSTAT, sspstat
mov_ff SSPCON1, sspcon1
mov_ff SSPCON2, sspcon2
bt_f_if1 st, st_addressing
bra m_event_done_addressing
- bt_f_if1 st, st_writing
- bra m_event_done_writing
-
bt_f_if1 st, st_acking
bra m_event_done_acking
+ bt_f_if1 st, st_writing
+ bra m_event_done_writing
+
bt_f_if1 st, st_reading
bra m_event_done_reading
m_event_bad
- panic morse_SM
+ i2cpanic morse_SM
;========================================
; MASTER - STARTING, ADDRESSING, STOPPING
;----------
m_start
; st checked for busyness correct
-; st_reading/writing set unchanged
+; st_reading/writing one set, one clear unchanged
; st_starting clear set
; W slave number any
; slave any slave_number
; expects to return directly to main program (caller)
mov_wf slave
- bra_z m_improper_slave
bs_f SSPCON2, SEN
m_start_or_restart
and_lw ~31
bra_nz m_improper_slave
bs_f st, st_starting
+ tst_f_ifnz slave
return
+ ; oops:
+;...
+
+m_improper_slave
+; slave slave number
+ i2cpanic morse_SN
+
;----------
m_event_done_starting
;----------
m_event_done_addressing
bt_f_if1 sspcon2, ACKSTAT
- bra m_bad_address_ack
+ bra m_no_address_ack
; OK, we got ack.
bc_f st, st_addressing
goto i2cmu_done
;----------
-m_bad_address_ack
- panic morse_SK
+m_no_address_ack
+ bt_f_if0 st, st_reading
+ bra m_bad_no_address_ack_write
+ clr_f st
+ rcall m_stop
+ goto i2cmu_slave_no_ack
-;----------
-m_improper_slave
-; slave slave number
- panic morse_SN
+m_bad_no_address_ack_write
+ panic morse_SW
;========================================
; MASTER - WRITING
;----------
i2cm_write_start
; At call On return
-; State Idle Writing-Setup
+; State Idle/Reading-Wait Writing-Setup
; W slave number any
tst_f_ifnz st
- bra m_improper_write_start
+ bra m_write_start_busy
bs_f st, st_writing
bra m_start
bra m_stop
-;----------
-m_improper_write_start
- panic morse_SW
-
;----------
m_improper_write_finish
- panic morse_SF
+ i2cpanic morse_SF
;========================================
; MASTER - READING
bra m_start
;----------
+m_write_start_busy
+ bs_f st, st_writing
m_read_start_busy
bt_f_if1 st, st_awaiting
- bra m_read_different
- panic morse_SR
+ bra m_address_different
+ i2cpanic morse_SB
;----------
-m_read_different
-; Main program would like to address another slave.
+m_address_different
+; Main program would like to address another slave for reading.
mov_wf slave_next
- bra_z m_improper_slave
+ tst_f_ifnz slave_next
bra i2cm_read_done
+ panic morse_SO
;----------
m_event_done_addressing_read
; ok, we want to read another:
mov_wf slave
clr_f slave_next
- bs_f st, st_reading
+ bt_f_if0 st, st_writing ; because of i2cm_write_start ?
+ bs_f st, st_reading ; no, then we will want to read
bs_f SSPCON2, RSEN
bra m_start_or_restart
;----------
m_improper_read_another
- panic morse_SA
+ i2cpanic morse_SA
;======================================================================
; SLAVE
set_f sspcon1
set_f sspcon2
set_f st_orig
- bs_f TRISB, 0
- bs_f TRISB, 1
+ bs_f TRISC, 3
+ bs_f TRISC, 4
bs_f SSPCON1, SSPEN
bs_f PIE1, SSPIE
return
;========================================
-; SLAVE - INTERRUPT HANDLING
-
+; SLAVE
+;
; In general, we figure out our state and then see what kind of events
; we were expecting. Bits we want to check:
-; 80 60 20 10 08 04 02 01
+; 80 40 20 10 08 04 02 01
; SMP CKE D_A P S R_W UA BF
; set clr data? stop start read? clr full?
; (we don't usually mention SMP, CKE and UA below)
-
+;
; Labels of the form s_event_* are branches of the interrupt
-; handler and are supposed to finish with retfie_r.
+; handler and are supposed to finish with return.
-; Some macros:
+;----------
+; Macros: chkvals_start and chkval
-chkvals_start macro what
- mov_fw what
+chkvals_start macro chvals_what
+ mov_fw chvals_what
endm
-chkval macro lastval, value, label
- xor_lw value ^ lastval
- bra_z label
+chkval macro chkval_lastval, chkval_value, chkval_label
+ xor_lw chkval_value ^ chkval_lastval
+ bra_z chkval_label
endm
-chkvals_addrrecv macro lastval
- chkval lastval, 0x8c, s_event_idle_addrrecvread ; A,!P, S,R,!BF
- chkval 0x8c, 0x89, s_event_idle_addrrecvwrite ; A,!P, S,W,BF
- endm
-chkvals_addrrecv_lastval equ 0x89
+near_i2csu code
;----------
-i2cs_interrupt ; 4cy interrupt latency + 3cy until branch to here
- bt_f_if0 PIR1, SSPIF
- bra s_event_bad_intr
- ; We have an interrupt:
-
-; Firstly, clear the interrupt flag so that if something else happens
-; while we faff, the interrupt will be regenerated:
- bc_f PIR1, SSPIF
-
- mov_ff st, st_orig
-
- mov_lw (1<<WCOL) | (1<<SSPOV)
- and_wfw SSPCON1
- bra_nz s_event_bad
-
- ; 8cy from entry to here, so total of 15cy
- bt_f_if1 st, st_reading
- bra s_event_reading ; 18cy to 1st insn of event_reading
-
- bt_f_if1 st, st_writing
- bra s_event_writing
-
-s_event_idle
- chkvals_start SSPSTAT
- chkvals_addrrecv 0 ; 23cy to 1st insn of addrrecvread
-s_event_bad
- panic morse_SS ; slave, interrupt, controller in bad state
+s_write_slurpbyte macro
+; W any byte from master
+; i2c controller waiting due to SEN etc continuing with next byte
+ mov_fw SSPBUF
+ bs_f SSPCON1, CKP
+ endm
-s_event_bad_intr
- panic morse_IH ; unknown high-priority interrupt
+;----------------------------------------
+i2cs_read_data
+ i2cs_read_data_macro
+ return
-;========================================
-; SLAVE - READING
+;----------------------------------------
+; branches from the ISR
;----------
-s_event_idle_addrrecvread
- bs_f st, st_awaiting
- call QQ_i2csu_read_begin ; 26cy until 1st insn of read_begin
- retfie_r
+s_event_addrrecvwrite
+ s_write_slurpbyte
+ goto i2csu_write_begin
;----------
-s_event_reading
- bs_f st, st_awaiting ; (probably)
-
- mov_fw SSPSTAT
- xor_lw 0xac ; D,!P, S,R,!BF
- bra_nz s_event_reading_not_another
- call QQ_i2csu_read_another
- ; 24cy until 1st insn of i2csu_read_another
s_event_reading_datanack
- retfie_r
-
-;...
-s_event_reading_not_another
- ; Whatever is happening, we're done reading now !
- clr_f st
- call i2csu_read_done
-
- chkvals_start SSPSTAT
- chkval 0, 0xa8, s_event_reading_datanack ; D,!P, S,!R,!BF
- ; Or, maybe it was nack and then we were reselected:
- chkvals_addrrecv 0xa8
-
- bra s_event_bad
-
-;----------
-i2cs_read_data
-; W byte for master any
-; State Transmit-Wait Transmit-Busy
- mov_wf SSPBUF
- bs_f SSPCON1, CKP
-
- bt_f_if0 st, st_awaiting
- bra improper_read_done_data
- bc_f st, st_awaiting
- bs_f st, st_reading
return
-;========================================
-; SLAVE - WRITING
-
;----------
-s_event_idle_addrrecvwrite
- bs_f SSPCON1, 3 ; we'll need the Stop interrupt
- bs_f st, st_writing
- ; well, this is all fine so far, so do carry on:
-
-s_write_slurpbyte
-; W any byte from master
-; i2c controller waiting due to SEN etc continuing with next byte
- mov_fw SSPBUF
- bs_f SSPCON1, CKP
- retfie_r
+s_event_writing_datarecv
+ s_write_slurpbyte
+ goto i2csu_write_data
;----------
-s_event_writing
- chkvals_start SSPSTAT
- chkval 0, 0xa9, s_event_writing_datarecv ; D,!P, S,W,BF
-
- ; Well, we're done writing now in any case
- clr_f st
- bc_f SSPCON1, 3 ; no Start and Stop interrupts any more
- call i2csu_write_done
-
- ; Who knows what might have happened. We may have
- ; missed a number of S and P due to delay between
- ; clearing SSPIF and SSPM3(s&p-intrs) so we can't be
- ; too picky.
+s_event_bad_intr
+ i2cpanic morse_IH ; unknown high-priority interrupt
- ; First, the nice cases:
- chkvals_start SSPSTAT
- chkvals_addrrecv 0
+;----------------------------------------
+i2cs_interrupt ; 4cy interrupt latency + 3cy until branch to here
+ bt_f_if0 PIR1, SSPIF
+ bra s_event_bad_intr
+ ; We have an interrupt:
- ; Then random junk:
- mov_fw SSPSTAT
- and_lw 0xc7 ; ?D_A, ?P; ?S
- xor_lw 0x80 ; SMP, !CKE, !R_W, !UA, !BF
+ mov_lw (1<<WCOL) | (1<<SSPOV)
+ and_wfw SSPCON1
bra_nz s_event_bad
- retfie_r
-;----------
-s_event_writing_datarecv
- rcall s_write_slurpbyte
-
- bt_f_if1 st, st_subsequent
- bra s_event_writing_datarecv_subsequent
-
- bs_f st, st_subsequent
- call i2csu_write_begin
- retfie_r
-
-s_event_writing_datarecv_subsequent
- rcall i2csu_write_another
- retfie_r
+; Firstly, clear the interrupt flag so that if something else happens
+; while we faff, the interrupt will be regenerated:
+ bc_f PIR1, SSPIF
+ chkvals_start SSPSTAT
+ chkval 0, 0x8c, i2csu_read_begin ;A,!P, S,R,!BF
+ chkval 0x8c,0xac, i2csu_read_another ;D,!P, S,R,!BF
+ chkval 0xac,0x89, s_event_addrrecvwrite ;A,!P, S,W,BF
+ chkval 0x89,0xa9, s_event_writing_datarecv ;D,!P, S,W,BF
+ chkval 0xa9,0xa8, s_event_reading_datanack ;D,!P, S,!R,!BF
+s_event_bad
+ i2cpanic morse_SS
;======================================================================
- include panic.fin
- include i2clib.inc
+ include program+externs.fin
+ include i2clib.inc
- end
+ end
~ijackson / trains.git / blobdiff