1 ./hostside-old [<options>] <nmra-command> <nmra-args...> see nmra-packets.h
2 ./hostside-old [<options>] nmra_bytes <nmra-command-hex-no-csum>
3 ./hostside-old [<options>] nmra_raw <nmra-command-hex-with-csum>
4 ./hostside-old [<options>] command <literal-data-for-pic>
6 -s<serialport> eg -s/dev/ttyS0 normally necessary
7 -w<repeatdelay> usleep; 0 = no usleep; default is -1 = don't repeat at all
8 -i<iterations> default is 0 = infinite; -1 means don't repeat
9 -f<fudgedelay> usleep; each character; default is 0 = no usleep
12 ./hostside-old -s/dev/ttyS0 -w10000 -i1000 nmra_bytes 0348
13 to tell decoder 3 to go speed 13 backwards every 10ms for 1000 times, ie 10s
14 (on norway this means it actually happens every 20ms, ie for 20s,
15 which makes it a bit of a fudge really)
17 ff ff 80 e4 c1 17 output bytes
18 11111111 11111111 10000000 11100100 11000001 00010111 as bits
19 >1111111 >1111111 >0000000 >1100100 >1000001 $0010111 top bit: >/$ for pic
21 1111111 1111111 0 00000011 0 01001000 0 01001011 1 reorg bits for nmra:
22 preamble (14) S 0AAAAAAA P 01DCSSSS 0 EEEEEEEE 1
26 ./hostside-old -st nmra_bytes 0348 && binview t
31 Protocol over new hostside stdin:
32 Example (always the same msg):
33 P> nmra [*<slot>] [<nmra-command [<nmra-args>...]] nmra speed28 3 13 1
34 P> nmra [*<slot>] [=<nmra-bytes>] nmra =0348
35 P> nmra [*<slot>] [:<nmra-bytes-with-csum>] nmra :03484b
36 P> nmra [*<slot>] [_<pic-literal-bytes>] nmra _7f7f00644197
37 in each case *<slot> indicates that the message should be put in
38 the retransmission cycle, and cancels any previous message with the
39 same *<slot>. <slot> may be empty.
41 cancels the relevant retransmission.
43 Example (always the same msg):
44 P> pic =<pic-bytes> pic =a003
45 P> pic <pic-command> [<pic-args...] pic point 3
46 the latter for commands with no `...' in README.protocol only
48 Keen readers will observe that
53 P> polarity <bit-string-in-hex>....
54 where, eg, with 14 segments,
55 [ 1] [111 1111] reversible
56 [123] [56 7890] [123 4567] segment number
57 1 0010 000 1 000 1000 0 111 1010 example POLARITY
58 1 0010 RRR 1 RRR RRRR 0 RRR R--- from README.protocol
59 RRR RRR RRRR RRR R actual R bits
60 \__ ___/\__ ___/ ... which map ...
61 RRRRRRRR RRRRRR ... into data ...
62 RRRRRRRR RRRRRR-- ... like this.
65 [12345678] [90123456] segment number
69 Up< pic-out <hex-bytes...>
70 Up< pic-in <hex-bytes...>
72 U< count <type> <number-in-decimal>
78 U< polarity <bit-string-in-hex>....
79 U< polarised <bit-string-in-hex>....