detpic/morse.messages

   1 # This is the list of morse panic messages.  Each line consists of:
   2 #    <morse>  [<address>,<address>...]   [; <description>]
   3 # This file is converted to morse.asm by the Perl script morse.asm-gen.
   4 # See morse.asm-gen for information about the format of the data stored
   5 # in flash.  Only addresses in the Access Bank are supported.
   6
   7 # Suggested output by on the per-pic-led is:
   8 #    morse (red/black)   contents of one address
   9 #    morse (red/black)   contents of next address
  10 #    ...
  11 #    morse (red/black)   contents of last address
  12 #    long pause
  13 #    go back to start
  14 # Contents of addresses should preferably be read into a temporary
  15 # buffer space somewhere so that each one is read once and that value
  16 # remembered.
  17
  18 # Temporary entries for testing and development
  19 TM      PIE1,SSPSTAT,SSPCON1,SSPCON2 ; Master got I2C interrupt
  20 TI0                             ; for iwj
  21 TI1                             ; for iwj
  22 TI2                             ; for iwj
  23 TI3                             ; for iwj
  24 TI4                             ; for iwj
  25 TI5                             ; for iwj
  26 TI6                             ; for iwj
  27 TI7                             ; for iwj
  28 TI8                             ; for iwj
  29 TI9                             ; for iwj
  30
  31 # Main message listing.  Kept sorted by section for easy reference.
  32 # -----------------------------------------------------------------
  33
  34 # Miscellaneous
  35 E                               ; `expected'; we were told to panic
  36 T                               ; master paniced because slave paniced
  37
  38 # Regarding communications from the host
  39 HX      ::t                     ; host sent unknown command
  40 HW      ::t                     ; host sent message which was too long
  41 HO                              ; host RS232 read overrun
  42 HF                              ; host RS232 framing error
  43 HN                              ; host sent too much NMRA - buffers full
  44 HM                              ; host sent too much NMRA - ack count overflow
  45 HB                              ; data for host overran buffer
  46 HP                              ; host sent >2-byte PING command
  47
  48 # Regarding communications by master with slaves
  49 MX                              ; slave (or intern) sent bad extra byte
  50 MR      mascan:b,mascan:cslot   ; reversers set byte with zz bit set
  51 MD                              ; i2cmu_done !
  52
  53 # Problematic interrupts
  54 IH      INTCON,INTCON3,PIR1,PIR2,PIR3 ; Interrupt source not found (high pri.)
  55 IL      INTCON,INTCON3,PIR1,PIR2,PIR3 ; Interrupt source not found (low pri.)
  56
  57 # W - watchdog
  58 WX                                      ; bad watchdog command
  59
  60 # Messages for i2clib, S*
  61 SM      i2clib+panic:st,:sspstat,:sspcon1,:sspcon2 ; m.,i., ctrlr bad state
  62 SS      SSPSTAT,SSPCON1                 ; s.,i., controller bad state
  63 SK      i2clib+panic:slave              ; m. couldn't address slave (no ack)
  64 SN      i2clib+panic:slave              ; improper slave number
  65 SO      i2clib+panic:slave              ; improper next slave number
  66 SB      i2clib+panic:st                 ; improper i2cm_{read,write}_start
  67 SF      i2clib+panic:st                 ; improper i2cmu_write_next_byte Z
  68 SA      i2clib+panic:st                 ; improper i2cm_read_another
  69 SD      i2clib+panic:st                 ; impr. i2cm_read_done/i2cs_read_data
  70
  71 # Messages for slave detection/i2c
  72 DQ      FSR2L,::outmsg_end              ; previous slave read incomplete
  73 DR      FSR2L,::outmsg_end              ; slave read overrun
  74 DX      ::t                             ; slave received wrong message byte
  75 DB      detect:message_buffer           ; slave_add_short_message overrun
  76 DF      ::t                             ; slave pic2detinfo[0] invalid bits
  77 DG      ::t                             ; too many slaves in pic2detinfo
  78 DM      detect:buf0                     ; master has MM bit set in buf0
  79
  80 # Messages for specific peripherals:
  81 # R - Reversers (polarity)
  82 RS      FSR0L                           ; POLARITY message too short
  83 RL      FSR0L                           ; POLARITY message too long
  84 RF                                      ; master board has no reversers
  85 RG                                      ; too many reversers boards
  86
  87 # P - Points
  88 PB      points:pointmsg                 ; Firing point when already busy
  89 PI      points:pointmsg,T3CON           ; Unexpected Timer 3 interrupt
  90 PU      points:pointmsg                 ; Firing nonexistent point
  91 PC                                      ; Firing point when CDU empty
  92 PS      points:pointslave,points:pointmsg ; Firing point on nonexistent board
  93 PF      ::t                             ; Flash mentions point not on board
  94 PX                                      ; Host sent >2-byte POINT command
  95 PM                                      ; Firing point when master/CDU busy
  96 PQ                                      ; POINTED when already charging
  97 PA                                      ; POINTED when already firing