1 # This is the list of morse panic messages. Each line consists of:
2 # <morse> [<address>,<address>...] [; <description>]
3 # This file is converted to morse.asm by the Perl script morse.asm-gen.
4 # See morse.asm-gen for information about the format of the data stored
5 # in flash. Only addresses in the Access Bank are supported.
7 # Suggested output by on the per-pic-led is:
8 # morse (red/black) contents of one address
9 # morse (red/black) contents of next address
11 # morse (red/black) contents of last address
14 # Contents of addresses should preferably be read into a temporary
15 # buffer space somewhere so that each one is read once and that value
18 # Main message listing. Kept sorted by morse for easy reference.
19 # ---------------------------------------------------------------
22 E ; `expected'; we were told to panic
23 T ; master paniced because slave paniced
25 # Regarding communications from the host
26 HX ::t ; host sent unknown command
27 HW ::t ; host sent message which was too long
28 HO ; host RS232 read overrun
29 HF ; host RS232 framing error
30 HN ; host sent too much NMRA - buffers full
31 HM ; host sent too much NMRA - ack count overflow
32 HB ; data for host overran buffer
33 HP ; host sent >2-byte PING command
35 # Regarding communications by master with slaves
36 MX ; slave (or intern) sent bad extra byte
37 MR mascan:b,mascan:cslot ; reversers set byte with zz bit set
40 # Problematic interrupts
41 IH INTCON,INTCON3,PIR1,PIR2,PIR3 ; Interrupt source not found (high pri.)
42 IL INTCON,INTCON3,PIR1,PIR2,PIR3 ; Interrupt source not found (low pri.)
43 IP INTCON ; Interrupt of priority supposedly disabled
45 # Temporary entries for testing and development
46 TM PIE1,SSPSTAT,SSPCON1,SSPCON2 ; Master got I2C interrupt
52 ZM i2clib:st,:sspstat,:sspcon1,:sspcon2 ; for testing
54 # Unimplemented things
71 # Messages for i2clib, S*
72 SM i2clib:st,:sspstat,:sspcon1,:sspcon2 ; m.,i., ctrlr bad state
73 SS SSPSTAT,SSPCON1 ; s.,i., controller bad state
74 SK i2clib:slave ; m. couldn't address slave (no ack)
75 SN i2clib:slave ; improper slave number
76 SB i2clib:st ; improper i2cm_{read,write}_start
77 SF i2clib:st ; improper i2cmu_write_next_byte Z
78 SA i2clib:st ; improper i2cm_read_another
79 SD i2clib:st ; impr. i2cm_read_done/i2cs_read_data
81 # Messages for slave detection/i2c
82 DQ FSR2L,::outmsg_end ; previous slave read incomplete
83 DR FSR2L,::outmsg_end ; slave read overrun
84 DX ::t ; slave received wrong message byte
85 DB detect:message_buffer ; slave_add_short_message overrun
86 DF ::t ; slave pic2detinfo[0] invalid bits
87 DG ::t ; too many slaves in pic2detinfo
88 DM ::buf0 ; master has MM bit set in buf0
90 # Messages for specific peripherals:
91 # R - Reversers (polarity)
92 RS FSR0L ; POLARITY message too short
93 RL FSR0L ; POLARITY message too long
96 PB points:pointmsg ; Firing point when already busy
97 PI points:pointmsg,T3CON ; Unexpected Timer 3 interrupt
98 PU points:pointmsg ; Firing nonexistent point
99 PF ::t ; Flash mentions point not on board
100 PX ; Host sent >2-byte POINT command
101 PM ; Firing point when master/CDU busy