From: james <james>
Date: Wed, 27 Feb 2008 18:42:00 +0000 (+0000)
Subject: *** empty log message ***
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=sympathy.git;a=commitdiff_plain;h=89459b051bbd25179a61e6faf379a27133caee05

*** empty log message ***
---

diff --git a/sympathy.1 b/sympathy.1
index 8da2be1..cc78ca1 100644
--- a/sympathy.1
+++ b/sympathy.1
@@ -295,9 +295,20 @@ currently using it. I/O to the device is currently suspended until the process d
 or removes its lock file.
 .TP 5
 .B n errs
-indicates the number of frames recived by the terminal device with errors. The count
-resets if no errors are detected by the device for 10 seconds.
-
+indicates the number of frames recived by the terminal device with errors (indicating 
+the wrong parity, baud rate or framing). The count resets if no errors are
+detected by the device for 10 seconds.
+.TP 5
+.B try higher
+.I Sympathy
+thinks that you have set the wrong baud rate and is unable to determine the correct
+one as the current baud rate is lower than the correct baud rate. Use the \fBbaud\fP command
+to set a higher baud rate (eg 115200) and sympathy will try again.
+.TP 5
+.B try \fIrate\fBb 
+.I Sympathy
+thinks that you have set the wrong baud rate and thinks that the correct baud rate is
+\fIrate\fP. Use the \fBbaud\fP command to change the current baud rate.
 
 .PP
  you can send commands by sending