transform: split out transform-common.h

[secnet.git] / README

diff --git a/README b/README
index 4fe279daa47c1a4a68e6129acaf18784e14902d8..93730e97a2c9cbf687fbffb73959beb02bda4a29 100644 (file)
--- a/README
+++ b/README
@@ -2,15 +2,10 @@ secnet - flexible VPN software
 
 * Copying
 
 
 * Copying
 

-secnet is Copyright (C) 1995--2001 Stephen Early <steve@greenend.org.uk>
+secnet is Copyright (C) 1995--2003 Stephen Early <steve@greenend.org.uk>

 It is distributed under the terms of the GNU General Public License,
 version 2 or later.  See the file COPYING for more information.
 
 It is distributed under the terms of the GNU General Public License,
 version 2 or later.  See the file COPYING for more information.
 

-The portable snprintf implementation in snprintf.c is Copyright (C)
-1999 Mark Martinec <mark.martinec@ijs.si> and is distributed under the
-terms of the Frontier Artistic License.  You can find the standard
-version of snprintf.c at http://www.ijs.si/software/snprintf/
-

 The IP address handling library in ipaddr.py is Copyright (C)
 1996--2000 Cendio Systems AB, and is distributed under the terms of
 the GPL.
 The IP address handling library in ipaddr.py is Copyright (C)
 1996--2000 Cendio Systems AB, and is distributed under the terms of
 the GPL.


@@ -121,12 +116,6 @@ f is a dictionary:
 
 Note that f/g/e is NOT 4.
 
 
 Note that f/g/e is NOT 4.
 

-In a future version of secnet it will also be permissible to list
-other dictionaries before a dictionary definition,
-eg. <defaults,otherdefaults>{definitions}.  These will be searched in
-order for keys, before the lexical parent.  (This is not yet
-implemented)
-

 Elements that are lists are inserted into lists in definitions, not
 referenced by them (i.e. you can't have lists of lists).
 
 Elements that are lists are inserted into lists in definitions, not
 referenced by them (i.e. you can't have lists of lists).
 


@@ -140,11 +129,14 @@ closure { definitions } is short for closure({definitions}).
 The main body of secnet, and all the additional modules, predefine
 some keys in the root dictionary.  The main ones are:
 
 The main body of secnet, and all the additional modules, predefine
 some keys in the root dictionary.  The main ones are:
 

-  yes, true, True, TRUE:   the boolean value True
-  no, false, False, FALSE: the boolean value False
+  yes, true, True, TRUE, on:   the boolean value True
+  no, false, False, FALSE, off: the boolean value False

   makelist:   turns a dictionary (arg1) into a list of definitions
               (ignoring the keys)
   readfile:   reads a file (arg1) and returns it as a string
   makelist:   turns a dictionary (arg1) into a list of definitions
               (ignoring the keys)
   readfile:   reads a file (arg1) and returns it as a string

+  map:        applies the closure specified as arg1 to each of the
+              remaining elements in the list in turn.  Returns a list
+              made up of the outputs of the closure.

 
 Keys defined by modules are described below, in the module
 documentation.
 
 Keys defined by modules are described below, in the module
 documentation.


@@ -202,6 +194,7 @@ Defines:
   udp (closure => comm closure)
 
 udp: dict argument
   udp (closure => comm closure)
 
 udp: dict argument

+  address (string): IP address to listen and send on

   port (integer): UDP port to listen and send on
   buffer (buffer closure): buffer for incoming packets
   authbind (string): optional, path to authbind-helper program
   port (integer): UDP port to listen and send on
   buffer (buffer closure): buffer for incoming packets
   authbind (string): optional, path to authbind-helper program


@@ -272,7 +265,10 @@ site: dict argument
   local-name (string): this site's name for itself
   name (string): the name of the site's peer
   link (netlink closure)
   local-name (string): this site's name for itself
   name (string): the name of the site's peer
   link (netlink closure)

-  comm (comm closure)
+  comm (one or more comm closures): if there is more than one, the
+   first one will be used for any key setups initiated by us using the
+   configured address.  Others are only used if our peer talks to
+   them.

   resolver (resolver closure)
   random (randomsrc closure)
   local-key (rsaprivkey closure)
   resolver (resolver closure)
   random (randomsrc closure)
   local-key (rsaprivkey closure)


@@ -283,16 +279,20 @@ site: dict argument
   transform (transform closure): how to mangle packets sent between sites
   dh (dh closure)
   hash (hash closure)
   transform (transform closure): how to mangle packets sent between sites
   dh (dh closure)
   hash (hash closure)

-  key-lifetime (integer): max lifetime of a session key, in ms [one hour]
+  key-lifetime (integer): max lifetime of a session key, in ms
+    [one hour; mobile: 2 days]

   setup-retries (integer): max number of times to transmit a key negotiation
   setup-retries (integer): max number of times to transmit a key negotiation

-    packet [5]
+    packet [5; mobile: 30]

   setup-timeout (integer): time between retransmissions of key negotiation
   setup-timeout (integer): time between retransmissions of key negotiation

-    packets, in ms [1000]
+    packets, in ms [2000; mobile: 1000]

   wait-time (integer): after failed key setup, wait this long (in ms) before
   wait-time (integer): after failed key setup, wait this long (in ms) before

-    allowing another attempt [20000]
+    allowing another attempt [20000; mobile: 10000]

   renegotiate-time (integer): if we see traffic on the link after this time
   renegotiate-time (integer): if we see traffic on the link after this time

-    then renegotiate another session key immediately [depends on key-lifetime]
-  keepalive (bool): if True then attempt always to keep a valid session key
+    then renegotiate another session key immediately (in ms)
+    [half key-lifetime, or key-lifetime minus 5 mins (mobile: 12 hours),
+     whichever is longer].
+  keepalive (bool): if True then attempt always to keep a valid session key.
+    Not actually currently implemented. [false]

   log-events (string list): types of events to log for this site
     unexpected: unexpected key setup packets (may be late retransmissions)
     setup-init: start of attempt to setup a session key
   log-events (string list): types of events to log for this site
     unexpected: unexpected key setup packets (may be late retransmissions)
     setup-init: start of attempt to setup a session key


@@ -304,9 +304,39 @@ site: dict argument
     packet-drop: whenever we throw away an outgoing packet
     dump-packets: every key setup packet we see
     errors: failure of name resolution, internal errors
     packet-drop: whenever we throw away an outgoing packet
     dump-packets: every key setup packet we see
     errors: failure of name resolution, internal errors

+    peer-addrs: changes to sets of peer addresses (interesting for mobile peers)

     all: everything (too much!)
     all: everything (too much!)

-
-** transform
+  mobile (bool): if True then peer is "mobile" ie we assume it may
+    change its apparent IP address and port number without either it
+    or us being aware of the change; so, we remember the last several
+    port/addr pairs we've seen and send packets to all of them
+    (subject to a timeout).  We maintain one set of addresses for key
+    setup exchanges, and another for data traffic. Two communicating
+    peers must not each regard the other as mobile, or all the traffic
+    in each direction will be triplicated (strictly, transmitted
+    mobile-peers-max times) and anyway two peers whose public contact
+    address may suddenly change couldn't communicate reliably because
+    their contact addresses might both change at once. [false]
+  mobile-peers-max (integer): Maximum number of peer port/addr pairs we
+    remember and send to.  Must be at least 1 and no more than 5.  [3]
+  mobile-peer-expiry (integer): For "mobile" peers only, the length
+    of time (in seconds) for which we will keep sending to multiple
+    address/ports from which we have not seen incoming traffic. [120]
+  local-mobile (bool): if True then other peers have been told we are
+    "mobile".  This should be True iff the peers' site configurations
+    for us have "mobile True" (and if we find a site configuration for
+    ourselves in the config, we insist on this).  The effect is to
+    check that there are no links both ends of which are allegedly
+    mobile (which is not supported, so those links are ignored) and
+    to change some of the tuning parameter defaults. [false]
+
+Links involving mobile peers have some different tuning parameter
+default values, which are generally more aggressive about retrying key
+setup but more relaxed about using old keys.  These are noted with
+"mobile:", above, and apply whether the mobile peer is local or
+remote.
+
+** transform-cbcmac

 
 Defines:
   serpent256-cbc (closure => transform closure)
 
 Defines:
   serpent256-cbc (closure => transform closure)


@@ -319,8 +349,8 @@ Defines:
 null-netlink: dict argument
   name (string): name for netlink device, used in log messages
   networks (string list): networks on the host side of the netlink device
 null-netlink: dict argument
   name (string): name for netlink device, used in log messages
   networks (string list): networks on the host side of the netlink device

-  exclude-remote-networks (string list): networks that may never be claimed
-    by any remote site using this netlink device
+  remote-networks (string list): networks that may be claimed
+    by the remote site using this netlink device

   local-address (string): IP address of host's tunnel interface
   secnet-address (string): IP address of this netlink device
   ptp-address (string): IP address of the other end of a point-to-point link
   local-address (string): IP address of host's tunnel interface
   secnet-address (string): IP address of this netlink device
   ptp-address (string): IP address of the other end of a point-to-point link


@@ -338,8 +368,9 @@ a netlink closure:
   options (string list):
     allow-route: allow packets coming from this tunnel to be routed to
       other tunnels as well as the host (used for mobile devices like laptops)
   options (string list):
     allow-route: allow packets coming from this tunnel to be routed to
       other tunnels as well as the host (used for mobile devices like laptops)

-    soft-route: remove these routes from the host's routing table when
+    soft: remove these routes from the host's routing table when

       the tunnel link quality is zero
       the tunnel link quality is zero

+  mtu (integer): default MTU over this link; may be updated by tunnel code

 
 Netlink will dump its current routing table to the system/log on
 receipt of SIGUSR1.
 
 Netlink will dump its current routing table to the system/log on
 receipt of SIGUSR1.


@@ -363,24 +394,20 @@ Defines:
   tun-old (closure => netlink closure)
 
 tun: dict argument
   tun-old (closure => netlink closure)
 
 tun: dict argument

+  flavour (string): optional, type of TUN interface to use
+    ("guess","linux","bsd","streams")

   device (string): optional, path of TUN/TAP device file ["/dev/net/tun"]
   interface (string): optional, name of tunnel network interface
   ifconfig-path (string): optional, path to ifconfig command
   route-path (string): optional, path to route command
   device (string): optional, path of TUN/TAP device file ["/dev/net/tun"]
   interface (string): optional, name of tunnel network interface
   ifconfig-path (string): optional, path to ifconfig command
   route-path (string): optional, path to route command

+  ifconfig-type (string): optional, how to perform ifconfig
+  route-type (string): optional, how to add and remove routes
+   types are: "guess", "ioctl", "bsd", "linux", "solaris-2.5"

   buffer (buffer closure): buffer for host->secnet packets
  plus generic netlink options, as for 'null-netlink'
 
   buffer (buffer closure): buffer for host->secnet packets
  plus generic netlink options, as for 'null-netlink'
 

-tun-old: dict argument
-  device (string): optional, path of TUN/TAP device file ["/dev/tun*"]
-  interface (string): optional, name of tunnel network interface
-  interface-search (bool): optional, whether to search for a free tunnel
-    interface (True if 'device' not specified, otherwise False)
-  ifconfig-path (string): optional, path to ifconfig command
-  route-path (string): optional, path to route command
- plus generic netlink options, as for 'null-netlink'
-
- I recommend you don't specify the 'interface' option unless you're
- doing something that requires the interface name to be constant.
+I recommend you don't specify the 'interface' option unless you're
+doing something that requires the interface name to be constant.

 
 ** rsa
 
 
 ** rsa