chiark / gitweb /
reprap-play.git
2015-12-25 Ian Jacksonpattress-boxes-3-cover: Peg, wip
2015-12-25 Ian Jacksonpattress-boxes-3-cover: PegProfile, wip
2015-12-25 Ian Jacksonpattress-boxes-3-cover: LidSide, top
2015-12-25 Ian Jacksonpattress-boxes-3-cover: LidSide, increase lid_fatbox_ov...
2015-12-25 Ian Jacksonpattress-boxes-3-cover: LidSide, split lid_box_overlap...
2015-12-25 Ian Jacksonpattress-boxes-3-cover: LidSide, introduce lid_inner_w...
2015-12-25 Ian Jacksonpattress-boxes-3-cover: LidSide, wip
2015-12-25 Ian Jacksonpattress-boxes-3-cover: LidSide, wip
2015-12-25 Ian Jacksonpattress-boxes-3-cover: LidSideProfile, wip
2015-12-21 Ian Jacksontest-cup: try this
2015-12-18 Ian Jacksonslic3r-config, pronsolerc: Adjust temperatures for...
2015-12-17 Ian Jacksonfilamentspool: Introduce channelslop
2015-12-17 Ian Jacksonfilamentspool: Add Demo() call to examples at end
2015-12-17 Ian Jacksonfilamentspool: light duty tuning: no changes for other...
2015-12-17 Ian Jacksonfilamentspool: Switch to light duty
2015-12-17 Ian Jacksonfilamentspool: Provide a rather shonky demo
2015-12-17 Ian Jacksonfilamentspool: Fix a bug in dove version introduced...
2015-12-17 Ian Jacksonfilamentspool: Prep a bit more for lightduty (still...
2015-12-17 Ian Jacksonfilamentspool: Prep for 2.85dia lightduty (nfc, even...
2015-12-16 Ian Jacksonpawn: set dx=0 to avoid rotate_extrude problem
2015-12-16 Ian Jacksonpawn: break d into d and dx (nfc)
2015-12-15 Ian Jacksonfilamentspool: Securing clip slightly smaller wings
2015-12-15 Ian Jacksonfilamentspool: 3mm: Actually propshift by only 6 to...
2015-12-15 Ian Jacksonfilamentspool: 3mm: Reduce effective rad
2015-12-15 Ian Jacksonfilamentspool: 3mm: Move cup prop inwards
2015-12-15 Ian Jacksonfilamentspool: 3mm: more Hub axle len
2015-12-15 Ian Jacksonfilamentspool: 3mm: Make Hub axle len depend exactly...
2015-12-15 Ian Jacksonfilamentspool: 3mm: Hub bigger axle hole
2015-12-15 Ian Jacksonfilamentspool: 3mm: Hub less chunky
2015-12-14 Ian Jacksonfilamentspool: Bigger bolt hole - apropos test
2015-12-14 Ian Jacksonholetest: a test
2015-12-14 Ian Jacksonfilamentspool: Prep for print
2015-12-14 Ian Jacksonfilamentspool: 3mm: Adjust hubaxlelen
2015-12-14 Ian JacksonRevert "filamentspool: 3mm: Increase ArmEnd length"
2015-12-14 Ian Jacksonfilamentspool: 3mm: Increase ArmEnd length
2015-12-14 Ian Jacksonfilamentspool: 3mm: Increase cupheight a bit again
2015-12-14 Ian Jacksonfilamentspool: Introduce armend_length (nfc)
2015-12-14 Ian Jacksonfilamentspool: 3mm: Adjust cup size
2015-12-14 Ian Jacksonfilamentspool: Reduce 3mm size: Minimum arm overlap
2015-12-14 Ian Jacksonfilamentspool: Reduce 3mm size: Prep for reduce armbase...
2015-12-14 Ian Jacksonfilamentspool: Reduce 3mm size: reduce arm overlap
2015-12-14 Ian Jacksonfilamentspool: 3mm: Reduce prongthick again, now we...
2015-12-14 Ian Jacksonfilamentspool: Cup: add prongrib on side
2015-12-14 Ian Jacksonfilamentspool: Cup: Fix extra clip posns when prongthic...
2015-12-14 Ian Jacksonfilamentspool: Cup: add prongrib on top
2015-12-14 Ian Jacksonfilamentspool: 3mm: Reduce prongwidth again, now we...
2015-12-14 Ian Jacksonfilamentspool: 3mm: Cup whitespace change (nfc)
2015-12-14 Ian Jacksonfilamentspool: 3mm: Cup strengthening bar at back
2015-12-14 Ian Jacksonfilamentspool: Working on Cup
2015-12-14 Ian Jacksonfilamentspool: FilamentCup: introduce baselen (nfc)
2015-12-14 Ian Jacksonfilamentspool: Remove now-redundant and inoperative...
2015-12-14 Ian Jacksonfilamentspool: 3mm: Slight reduce radii
2015-12-14 Ian Jacksonfilamentspool: Add nondove_armhole_slop_x
2015-12-14 Ian Jacksonfilamentspool: 3mm: Four arms
2015-12-14 Ian Jacksonfilamentspool: Prep for varying arm number (nfc)
2015-12-14 Ian Jacksonfilamentspool: 3mm: Hub non-dove version
2015-12-14 Ian Jacksonfilamentspool: 3mm: Hub non-dove version prep (nfc...
2015-12-14 Ian Jacksonfilamentspool: Reorg so axle hole is subtracted from...
2015-12-14 Ian Jacksonfilamentspool: Reorg so axle hole is subtracted from...
2015-12-14 Ian Jacksonfilamentspool: Reorg so axle hole is subtracted from...
2015-12-14 Ian Jacksonfilamentspool: 3mm: bigger hub etc.
2015-12-14 Ian Jacksonfilamentspool: Move selsz and usedove up (nfc)
2015-12-14 Ian Jacksonfilamentspool: Prep for work on hub
2015-12-13 Ian Jacksonfilamentspool: Prep for some test prints
2015-12-13 Ian Jacksonfilamentspool: ArmEnd nondove version wip
2015-12-13 Ian Jacksonfilamentspool: Prep ArmEnd for nondove (nfc if dove)
2015-12-13 Ian Jacksonfilamentspool: Prep usedove() nfc
2015-12-13 Ian Jacksonfilamentspool: CupSecuringClip thicker
2015-12-13 Ian Jacksonfilamentspool: CupSecuringClip four handles
2015-12-13 Ian Jacksonfilamentspool: Work on CupSecuringClip
2015-12-13 Ian Jacksonfilamentspool: 3mm: stalklength even bigger
2015-12-13 Ian Jacksonfilamentspool: 3mm: stalklength bigger
2015-12-13 Ian Jacksonfilamentspool: 3mm: thicker prongs on cup
2015-12-13 Ian Jacksonfilamentspool: 3mm: bigger cup for 3mm x 100m coils
2015-12-13 Ian Jacksonfilamentspool: 3mm: Set for fatter filament
2015-12-13 Ian Jacksonfilamentspool: 3mm: introduce selsz (nfc)
2015-12-13 Ian Jacksonfilamentspool: More clips
2015-12-13 Ian Jacksonfilamentspool: Adjust prop for square cup (this time...
2015-12-13 Ian Jacksonfilamentspool: Adjust prop for square cup
2015-12-13 Ian Jacksonfilamentspool: Square cup
2015-12-13 Ian Jacksonfilamentspool: Before work on TAZ-5 version: another...
2015-12-13 Ian Jacksonfilamentspool: Before work on TAZ-5 version
2015-11-04 Ian Jacksonwarptest3: no, try this
2015-11-04 Ian Jacksonwarptest3: try this
2015-11-02 Ian Jacksonled-panel-ceiling-bracket: does not need to be so strong
2015-11-02 Ian Jacksonled-panel-ceiling-bracket: invert for printing
2015-11-02 Ian Jacksonled-panel-ceiling-bracket: non-countersunk screws,...
2015-11-01 Ian Jacksonled-panel-ceiling-bracket: show remaining wall thicknes...
2015-11-01 Ian Jacksonled-panel-ceiling-bracket: Fix plasplug size
2015-11-01 Ian Jacksonled-panel-ceiling-bracket: fix "bolt hole depth change...
2015-11-01 Ian Jacksonled-panel-ceiling-bracket: needs to engage twice as...
2015-10-30 Ian Jacksonled-panel-ceiling-bracket: bolt hole depth change for...
2015-10-30 Ian Jacksonled-panel-ceiling-bracket: swap order to make % of...
2015-10-29 Ian Jacksonled-panel-ceiling-bracket: stronger
2015-10-29 Ian Jacksonled-panel-ceiling-bracket: ready for test?
2015-10-29 Ian Jacksonled-panel-ceiling-bracket: wip
2015-10-29 Ian Jacksonled-panel-ceiling-bracket: wip
2015-10-25 Ian Jacksonwarptest: shorter and taller
2015-10-25 Ian Jacksonwarptest: longer and thinner and taller
2015-09-19 Ian JacksonMakefile: fix warning
next