chiark / gitweb /
reprap-play.git
2017-10-17 Ian Jacksonposter-tube-lid: adjust rivet_posn (from v4)
2017-10-17 Ian Jacksonposter-tube-lid: reduce bayo_interf (from v4)
2017-10-17 Ian Jacksonposter-tube-lid: remove unused bayo_entry_ramp (nfc)
2017-10-17 Ian Jacksonposter-tube-lid: adjust bayo_interf_slope (from v4)
2017-10-17 Ian Jacksonposter-tube-lid: introduce inside_rivet_gap (from v4)
2017-10-17 Ian Jacksonposter-tube-lid: adjust bayo_gap from v3
2017-10-17 Ian Jacksonposter-tube-lid: adjust rivet_posn from v3
2017-10-17 Ian Jacksonposter-tube-lid: replace bayo_above_gap with bayo_gap...
2017-10-17 Ian Jacksonposter-tube-lid: align bayo outline
2017-10-13 Ian Jacksonposter-tube-lid: adjust: another attempt, following v2
2017-10-13 Ian Jacksonposter-tube-lid: undo unsuccessful adjustment
2017-10-11 Ian Jacksonposter-tube-lid: LimitForHandling: adjust thickness
2017-10-11 Ian Jacksonposter-tube-lid: LimitForHandling: lobe parts
2017-10-10 Ian Jacksonposter-tube-lid: LimitForHandling: central part
2017-10-10 Ian Jacksonposter-tube-lid: move bayo to centre opening on axis
2017-10-10 Ian Jacksonposter-tube-lid: wip handling
2017-10-10 Ian Jacksonposter-tube-lid: wip handling
2017-10-10 Ian Jacksonposter-tube-lid: move oring rm to other side
2017-10-10 Ian Jacksonposter-tube-lid: oring rm
2017-10-10 Ian Jacksonposter-tube-lid: adjust from v1
2017-10-10 Ian Jacksonposter-tube-lid: adjust from v1
2017-10-10 Ian Jacksonposter-tube-lid: adjust from v1
2017-10-09 Ian Jacksonposter-tube-lid: CoverTest1: adjust
2017-10-09 Ian Jacksonposter-tube-lid: introduce "coarse" (nfc)
2017-10-09 Ian Jacksonposter-tube-lid: CoverTest1 has 4 columns
2017-10-09 Ian Jacksonposter-tube-lid: tune a bit
2017-10-09 Ian Jacksonposter-tube-lid: tune a bit
2017-10-09 Ian Jacksonposter-tube-lid: rename by_oring_z (from seal_thick...
2017-10-09 Ian Jacksonposter-tube-lid: abolish top_thick (which is now not...
2017-10-09 Ian Jacksonposter-tube-lid: fix braces (again)
2017-10-09 Ian Jacksonposter-tube-lid: change top_minthick_* to top_thick_...
2017-10-09 Ian Jacksonposter-tube-lid: introduce top_middle_dr (instead of...
2017-10-09 Ian Jacksonposter-tube-lid: fix braces z pos after thinner middle
2017-10-09 Ian Jacksonposter-tube-lid: introduce middle_bot_z (nfc)
2017-10-09 Ian Jacksonposter-tube-lid: slope to thinner lid
2017-10-09 Ian Jacksonposter-tube-lid: adjust demo
2017-10-09 Ian Jacksonposter-tube-lid: inttroduce top_minthick_by_oring
2017-10-09 Ian Jacksonposter-tube-lid: fix showing brace ends
2017-10-09 Ian Jacksonposter-tube-lid: incrase bayo_interf
2017-10-09 Ian Jacksonposter-tube-lid: fix missing bayo_interf in bayo_h...
2017-10-09 Ian Jacksonposter-tube-lid: convert to oring: oring space done...
2017-10-09 Ian Jacksonposter-tube-lid: convert to oring: wip oring gap
2017-10-09 Ian Jacksonposter-tube-lid: convert to oring: provide oring_oblate
2017-10-09 Ian Jacksonposter-tube-lid: convert to oring: provide oring_[xy...
2017-10-09 Ian Jacksonposter-tube-lid: convert to oring: move some stuff...
2017-10-09 Ian Jacksonposter-tube-lid: convert to oring: abolish seal_recess
2017-10-09 Ian Jacksonposter-tube-lid: convert to oring: introduce some diffe...
2017-10-09 Ian Jacksonposter-tube-lid: convert to oring: introduce vars,...
2017-10-09 Ian Jacksonposter-tube-lid: make ProfilesDemo a toplevel
2017-10-08 Ian Jacksonfilamentspool: CupSecuringClip: fix smaller/bigger...
2017-10-08 Ian Jacksonfilamentspool: CupSecuringClip: shrink small end somewhat
2017-10-08 Ian Jacksonposter-tube-lid: adjust jig
2017-10-08 Ian Jacksonposter-tube-lid: CoverTest1
2017-10-08 Ian Jacksonposter-tube-lid: toplevels, fix convexity
2017-10-08 Ian Jacksonposter-tube-lid: CoverTest
2017-10-08 Ian Jacksonposter-tube-lid: Jig
2017-10-08 Ian Jacksonposter-tube-lid: tuning in Cura
2017-10-08 Ian Jacksonposter-tube-lid: braces in Cover
2017-10-08 Ian Jacksonposter-tube-lid: Cover
2017-10-08 Ian Jacksonposter-tube-lid: BayonetCutout abstract out polygon...
2017-10-08 Ian Jacksonposter-tube-lid: BayonetCutout abstract out polygon...
2017-10-08 Ian Jacksonposter-tube-lid: BayonetCutout rework to RotateProjectSlice
2017-10-08 Ian Jacksonposter-tube-lid: BayonetCutout rotation thing
2017-10-08 Ian Jacksonposter-tube-lid: BayonetCutout rotation thing
2017-10-08 Ian Jacksonposter-tube-lid: wip BayonetCutout rotation thing
2017-10-08 Ian Jacksonposter-tube-lid: wip BayonetCutout rotation thing
2017-10-08 Ian Jacksonposter-tube-lid: wip BayonetCutout
2017-10-08 Ian Jacksonposter-tube-lid: fix over_rivet_gap confusion
2017-10-08 Ian Jacksonposter-tube-lid: introduce ProfilesDemo, BayonetCutout
2017-10-08 Ian Jacksonposter-tube-lid: go back to not being a perl script
2017-10-08 Ian Jacksonposter-tube-lid: bayo polygon seems good-ish
2017-10-08 Ian Jacksonposter-tube-lid: rework bayo polygon
2017-10-07 Ian Jacksonposter-tube-lid: before rework bayo polygon
2017-10-07 Ian Jacksonposter-tube-lid: wip bayonet
2017-10-07 Ian Jacksonposter-tube-lid: make into a perl script
2017-10-07 Ian Jacksonposter-tube-lid: wip
2017-10-07 Ian Jacksonposter-tube-lid: wip
2017-10-05 Ian Jacksonfilamentspool: reduce ratchetstep
2017-10-05 Ian Jacksonfilamentspool: lt: shrink hub so arm has more positions
2017-10-05 Ian Jacksonfilamentspool: make armend_length selsz (nfc)
2017-10-01 Ian Jacksonstringing-test: try this one (better)
2017-10-01 Ian Jacksonstringing-test: try this one
2017-10-01 Ian Jacksonstringing-test: wip
2017-10-01 Ian Jacksonstringing-test: wip
2017-09-09 Ian Jacksonshelf-label-holder: from v3, which shows it was wrong...
2017-09-09 Ian Jacksonshelf-label-holder: adjustments from v2
2017-09-09 Ian Jacksonsprinkler-spike-receptacle: StrapFixingTest
2017-09-09 Ian Jacksonsprinkler-spike-receptacle: wip adjustments
2017-09-09 Ian Jacksonsprinkler-spike-receptacle: wip strap on its way
2017-09-09 Ian Jacksonsprinkler-spike-receptacle: wip strap (broken right...
2017-09-09 Ian Jacksonsprinkler-spike-receptacle: rename Mount modules to...
2017-09-09 Ian Jacksonshelf-label-holder: Main instead. Test reveals Print...
2017-09-09 Ian Jacksonshelf-label-holder: Print
2017-09-09 Ian Jacksonshelf-label-holder: Main
2017-09-09 Ian Jacksonshelf-label-holder: by eye adjustments
2017-09-09 Ian Jacksonshelf-label-holder: Elevation seems functional
2017-09-09 Ian Jacksonshelf-label-holder: working on Elevation
2017-09-09 Ian Jacksonshelf-label-holder: working on Elevation
2017-09-09 Ian Jacksonsprinkler-spike-receptacle: bigger test
2017-09-09 Ian Jacksonsprinkler-spike-receptacle: adjustments from tests v2
next