| 2016-08-28 |
Ian Jackson | flyscreen-handle: from v3: break out Ribbles (nfc)
|
commit | commitdiff | tree |
| 2016-08-28 |
Ian Jackson | flyscreen-handle: from v3: extend bottom
|
commit | commitdiff | tree |
| 2016-08-28 |
Ian Jackson | flyscreen-handle: from v3: Prep for multiple holes...
|
commit | commitdiff | tree |
| 2016-08-28 |
Ian Jackson | flyscreen-handle: looks good, make final
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: kit for v3 test
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: from v2 test
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: kits
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: separate out test
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: bottom strap too
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: from v1, adj protrh
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: from v1, adj openingedge
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: bot adj cutout is better
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: wip cutout
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: wip straps
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: Before P9 strap
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: Ribbles
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: Make top side flat
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: New inadj approach, fix undef
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: New inadj approach, use same P7 always
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: New inadj approach
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: LeverSects wip, before bodge P3b
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: LeverSects wip, before Test
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: LeverSects wip, before Test and before...
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: LeverSects wip
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: wip, Ps etc
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: wip, Ps etc
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: wip, Q0 etc
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: remeasure
|
commit | commitdiff | tree |
| 2016-08-27 |
Ian Jackson | flyscreen-handle: start rewrite
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: peg bases from v10
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: adjustments from v10
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: adjustments for strength (again)
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: adjustments for strength
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: introduce top_w (nfc)
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: do not make InsertSection get in...
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: PegTestKit
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: Peg, wip, PegSectionSlice (not much...
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: Peg, wip
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: tapered peg section
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | Revert "flyscreen-handle: wip shorter peg"
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: wip shorter peg
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: wip pegs
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: from v8, need to work with pegs
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: revised approach, for adding pegs
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: do test v8
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: apropos v6, v7 try new pushmore
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | Revert "flyscreen-handle: from v6, another go at the...
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: sort out slopes
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: from v6, nicer handle, really
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: from v6, nicer handle
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: from v6, another go at the retain
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: wip sort out new slopes
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: need to test again
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: entirely new retain (apropos v5)
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: adjustments from v5 fit measurements
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: take RetainCutout out of HandleSection too
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: better demo
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: try full size
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: adjustment handle from v3
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: adjustments from v3
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: for v3 test
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: for v3 test
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: object
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: adjustments from 1st test
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: provide GappingSection
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: provide BasicSection
|
commit | commitdiff | tree |
| 2016-08-26 |
Ian Jackson | flyscreen-handle: topprotr adj
|
commit | commitdiff | tree |
| 2016-08-25 |
Ian Jackson | flyscreen-handle: wip, extrude
|
commit | commitdiff | tree |
| 2016-08-25 |
Ian Jackson | flyscreen-handle: wip, Retain
|
commit | commitdiff | tree |
| 2016-08-25 |
Ian Jackson | flyscreen-handle: wip, HandleSection
|
commit | commitdiff | tree |
| 2016-08-25 |
Ian Jackson | flyscreen-handle: wip, HandleSection
|
commit | commitdiff | tree |
| 2016-08-25 |
Ian Jackson | flyscreen-handle: wip, HandleSection (nfc)
|
commit | commitdiff | tree |
| 2016-08-25 |
Ian Jackson | flyscreen-handle: wip, InsertSection
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v4: intermediate tube size
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | Revert "lock-inframe-bracket: from v2: slightly bigger...
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v3: slightly smaller lock...
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | Revert "lock-inframe-bracket: from v2: slightly smaller...
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v2: slightly bigger tube
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v2: slightly smaller lock...
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: for v2: TestClipBoltHole
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: for v2: introduce TestTopEdge
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v1: smaller clip bolt hole
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v1: thinner around tube...
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v1: bigger tube gap
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v1: bigger tube
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v1: thicker clip
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v1: correct lockshaft_dia
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: from v1: introduce lockshaft_dia...
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: Fix front hole position
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: Improve overhang
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: Finer
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: Bracket
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: Adjust some thicknesses
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: ThroughHoles wip
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: MainPositive seem ok
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: ClipElevations seem ok
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: wip ClipElevations
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | lock-inframe-bracket: rename pump to lock (wtf)
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | pump-inframe-bracket: wip, have (most of) MainPlan
|
commit | commitdiff | tree |
| 2016-08-14 |
Ian Jackson | pump-inframe-bracket: wip
|
commit | commitdiff | tree |
| next |
~ianmdlvl / reprap-play.git / search