| 2012-08-26 |
Ian Jackson | cliphook wip - end now in right place
|
commit | commitdiff | tree |
| 2012-08-26 |
Ian Jackson | cliphook wip - causes openscad to fail an assertion
|
commit | commitdiff | tree |
| 2012-08-26 |
Ian Jackson | cliphook wip
|
commit | commitdiff | tree |
| 2012-08-26 |
Ian Jackson | cliphook wip
|
commit | commitdiff | tree |
| 2012-08-25 |
Ian Jackson | test-object slightly bigger in yellow
|
commit | commitdiff | tree |
| 2012-08-24 |
Ian Jackson | 10254 huxley-spindle printed
|
commit | commitdiff | tree |
| 2012-08-24 |
Ian Jackson | 10254 tower-base initial attempt
|
commit | commitdiff | tree |
| 2012-08-22 |
Ian Jackson | 8317 ForkClips as printed in red
|
commit | commitdiff | tree |
| 2012-08-21 |
Ian Jackson | 10254 initial attempt
|
commit | commitdiff | tree |
| 2012-08-14 |
Ian Jackson | config: first layer 200% to see if better adhesion
|
commit | commitdiff | tree |
| 2012-08-14 |
Ian Jackson | increase 1st layer bed temp., as we are printing now...
|
commit | commitdiff | tree |
| 2012-08-13 |
Ian Jackson | dovetailtest as just printed
|
commit | commitdiff | tree |
| 2012-08-13 |
Ian Jackson | go back to slic3r in pronsolerc
|
commit | commitdiff | tree |
| 2012-08-13 |
Ian Jackson | configs: better bed temp, seems to have done away with...
|
commit | commitdiff | tree |
| 2012-08-13 |
Ian Jackson | wip warp test - try higher bed temp
|
commit | commitdiff | tree |
| 2012-08-13 |
Ian Jackson | go back to slic3r since skeinforge still unconvincing
|
commit | commitdiff | tree |
| 2012-08-13 |
Ian Jackson | wip trying skeinforge again, more
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | wip trying skeinforge again
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests: as just printed, extrusion rate tests
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests: break out size_tests
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests: break out org_oblong
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | calib-fit: regen with different settings, still comes...
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | slic3r: better epilogue
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | slic3r: play with nozzle dia
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | config, calib-fit: 1 perimiter only
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-test: squash down by 0.1mm to aid adhesion
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-test: remove edge ticks; our printer is printing...
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-test: calib-fit.gcode as uses as a basis
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-test: test objects as printing just now
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-test: test objects
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | manual-gcode-generator: perl-mode fix
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | manual-gcode-generator: allow ws before !; support...
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - before coord adjusts
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip - printed, looks good
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip - printed, fix up final thing
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip - size tests initial version ready...
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip - movement generator in separate file
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip - movement generator produces layers
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip - movement generator seems to work...
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip - movement generator seems to work...
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip - movement generator
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip - some notes on some commands found...
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - wip
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests - rename, for manual processing
|
commit | commitdiff | tree |
| 2012-08-12 |
Ian Jackson | size-tests: start with a copy of calib-fit.gcode
|
commit | commitdiff | tree |
| 2012-08-11 |
Ian Jackson | warp test file, not yet printed
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | bump temperature to 215/210 as that sticks better on...
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | slic3r tuning: produces better output but hole is much...
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | slic3r: wip better config, nozzle dia, etc.
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | calib-fit: as just printed
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | slic3r with z offset
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | keep some of our own settings
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | slic3r defaults
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | back to play directory
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | firmware loaded and tested
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | slic3r-config: put skirts back
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | calib-fit for debug slic3r
|
commit | commitdiff | tree |
| 2012-08-10 |
Ian Jackson | Makefile: better handling of slic3r config
|
commit | commitdiff | tree |
| 2012-08-09 |
Ian Jackson | write-firmware
|
commit | commitdiff | tree |
| 2012-08-04 |
Ian Jackson | save firmware we loaded and tested
|
commit | commitdiff | tree |
| 2012-08-02 |
Ian Jackson | calib-fit: initial test objects
|
commit | commitdiff | tree |
| 2012-08-02 |
Ian Jackson | Makefile for noninteractive processing
|
commit | commitdiff | tree |
| 2012-08-02 |
Ian Jackson | as for brackets 2012-08-01
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | for thin wall box 5573 as printed
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | biscuits as printed
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | biscuits as printed
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | refactor parameters, no functional change, really
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | refactor parameters, no functional change
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | adjustments vefore resize
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | before test print
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | before THE HOLLOWING woooooo
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | restore skirt distance
|
commit | commitdiff | tree |
| 2012-07-31 |
Ian Jackson | bracket as printed - NB changed bed temperature and...
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | re repsnapper
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | some more notes
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | some more notes
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | some more notes
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | use /home/reprap
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | some notes on how to print
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | as printed today
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | Revert "light-bracket: a bit of debug"
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | size adjustments
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | settings for today's prints so far
|
commit | commitdiff | tree |
| 2012-07-29 |
Ian Jackson | as programmed just now
|
commit | commitdiff | tree |
| 2012-07-28 |
Ian Jackson | firmware as read out of our chip
|
commit | commitdiff | tree |
| 2012-07-25 |
Ian Jackson | experimental slic3r prefix
|
commit | commitdiff | tree |
| 2012-07-25 |
Ian Jackson | light-bracket: as 2nd test print, with weird rectangular...
|
commit | commitdiff | tree |
| 2012-07-25 |
Ian Jackson | light-bracket: a bit of debug
|
commit | commitdiff | tree |
| 2012-07-25 |
Ian Jackson | light-bracket: only bracket
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | config: fix comment
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | light bracket: other section
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | slic3r-config.ini is here
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | config files which seem to work
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | light bracket: sloping hooks
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | light bracket: fewer slashes
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | light bracket: countersunk holes, better base, etc.
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | light bracket: dimensional adjustments
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | light bracket: whole object
|
commit | commitdiff | tree |
| 2012-07-22 |
Ian Jackson | more ignores
|
commit | commitdiff | tree |
| 2012-07-03 |
Ian Jackson | start_PLA.gcode change temp
|
commit | commitdiff | tree |
| next |
~ianmdlvl / reprap-play.git / search