From f91c26ff587936aa5c79cbb5e1aad12717d8c4bd Mon Sep 17 00:00:00 2001
From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Sat, 13 Feb 2016 22:37:22 +0000
Subject: [PATCH] bike-lipo-box: wip Box

---
 bike-lipo-box.scad | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/bike-lipo-box.scad b/bike-lipo-box.scad
index 850200b..131e17d 100644
--- a/bike-lipo-box.scad
+++ b/bike-lipo-box.scad
@@ -16,8 +16,20 @@ s1930_recess = 3;
 s1930_around = 3;
 s1930_behind = 3;
 
+totx_inner = 180;
+toty_outer = 95;
+totz_outer = 31;
+
 wallthick = 2.5;
 
+// calculated
+
+totx_outer = totx_inner + wallthick*2;
+toty_inner = toty_outer - wallthick*2;
+totz_inner = totz_outer - wallthick*2;
+
+sb_box_sz = [totx_outer, totz_outer, toty_inner];
+
 // origin is at centre on outer face wall
 // outside is towards positive x
 // mounting is vertical
@@ -118,7 +130,16 @@ module ProfileDemos(){ ////toplevel
   color("blue") SealingBox_CeilProfile();
   color("red") translate([-5,0]) square([1,ts_totz_inner]);
 }
-			  
+
+module Box(){ ////toplevel
+  $sealingbox_sz = sb_box_sz;
+  rotate([90,0,0])
+    translate([-wallthick,-wallthick, -toty_inner])
+    SealingBox_RectBox();
+  color("blue")
+    cube([totx_inner, toty_inner, totz_inner]);
+}
+
 //TestWall();
 //ProfileDemos();
 //TestSealBox();
-- 
2.30.2