From a60b064b04ac811b3874593dc4884cb634984ea4 Mon Sep 17 00:00:00 2001 From: Ian Jackson Date: Sun, 14 Oct 2012 23:13:44 +0100 Subject: [PATCH] slic3r-config warptest2 shows that higher temps work better --- slic3r-config.ini | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/slic3r-config.ini b/slic3r-config.ini index e486180..794667c 100644 --- a/slic3r-config.ini +++ b/slic3r-config.ini @@ -1,7 +1,7 @@ -# generated by Slic3r 0.9.1 on Sun Oct 14 22:11:17 2012 +# generated by Slic3r 0.9.1 on Sun Oct 14 23:13:04 2012 acceleration = 0 bed_size = 140,140 -bed_temperature = 80 +bed_temperature = 90 bridge_fan_speed = 100 bridge_flow_ratio = 1 bridge_speed = 60 @@ -27,7 +27,7 @@ filament_diameter = 1.77 fill_angle = 45 fill_density = 0.2 fill_pattern = rectilinear -first_layer_bed_temperature = 70 +first_layer_bed_temperature = 80 first_layer_extrusion_width = 200% first_layer_height = 0.4 first_layer_speed = 30% @@ -80,7 +80,7 @@ support_material_extrusion_width = 0 support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_threshold = 45 -temperature = 210 +temperature = 215 threads = 8 top_solid_infill_speed = 50 travel_speed = 130 -- 2.30.2