From 8f4b4602f373e619c7f2acbc39228b28ba48d6e8 Mon Sep 17 00:00:00 2001
From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Sat, 17 Nov 2012 14:46:29 +0000
Subject: [PATCH] xeno-drivebay-bracket: try again with no pad

---
 slic3r-config.ini          |  2 +-
 xeno-drivebay-bracket.scad | 23 +++++++++++++----------
 2 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/slic3r-config.ini b/slic3r-config.ini
index aced125..794667c 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -72,7 +72,7 @@ small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
 solid_infill_speed = 60
 solid_layers = 3
-start_gcode = G28 ; home all axes\nG1 Z10 F1000
+start_gcode = G28 ; home all axes
 support_material = 0
 support_material_angle = 0
 support_material_extruder = 1
diff --git a/xeno-drivebay-bracket.scad b/xeno-drivebay-bracket.scad
index 1821b99..e00091f 100644
--- a/xeno-drivebay-bracket.scad
+++ b/xeno-drivebay-bracket.scad
@@ -16,8 +16,8 @@ holeslop = 0.5;
 
 webt = 2.5;
 
-//padw = 12;
-padw = 0;
+pad = false;
+padw = 12;
 
 padt = webt;
 padl = padw;
@@ -27,17 +27,17 @@ wallholeh = 6+14+2;
 wallholesz = 3.0;
 wallholeslot = 4.5;
 
-walll = basel + webt + padl;;
+walll = basel + webt + (pad ? padl : -0.1);
 
 webw = min(basew, padw);
 
 module slothole(sz, slot, thick, csunk=true, slop=holeslop) {
   hull(){
     for (y = [-slot/2,slot/2]) {
-      translate([0,y,-0.05])
+      translate([0,y,-0.15])
 	cylinder(r1=sz/2 + slop,
 		 r2=sz/2 + (csunk ? thick : 0) + slop,
-		 h=thick+0.10);
+		 h=thick+0.30);
     }
   }
 }
@@ -52,6 +52,7 @@ module Bracket(){
   }
 
   difference(){
+    translate([0.1, 0.3, 0.1])
     rotate([90,0,0]) {
       linear_extrude(height=wallt){
 	polygon([[0,0],
@@ -80,11 +81,13 @@ module Bracket(){
     }
   }
 
-  translate([basel+webt, -padw, wallh-padt]) {
-    difference(){
-      cube([padl, padw, padt]);
-      translate([padl/2, padw/2, -1])
-	cylinder(r=padholesz/2 + holeslop, h=padt+2);
+  if (pad) {
+    translate([basel+webt, -padw, wallh-padt]) {
+      difference(){
+	cube([padl, padw, padt]);
+	translate([padl/2, padw/2, -1])
+	  cylinder(r=padholesz/2 + holeslop, h=padt+2);
+      }
     }
   }
 }
-- 
2.30.2