chiark / gitweb /
reprap-play.git
3 years agoflyscreen-handle: revised approach, for adding pegs
Ian Jackson [Fri, 26 Aug 2016 18:59:05 +0000 (19:59 +0100)]
flyscreen-handle: revised approach, for adding pegs

3 years agoflyscreen-handle: do test v8
Ian Jackson [Fri, 26 Aug 2016 18:39:48 +0000 (19:39 +0100)]
flyscreen-handle: do test v8

3 years agoflyscreen-handle: apropos v6, v7 try new pushmore
Ian Jackson [Fri, 26 Aug 2016 18:39:39 +0000 (19:39 +0100)]
flyscreen-handle: apropos v6, v7 try new pushmore

3 years agoRevert "flyscreen-handle: from v6, another go at the retain"
Ian Jackson [Fri, 26 Aug 2016 18:35:52 +0000 (19:35 +0100)]
Revert "flyscreen-handle: from v6, another go at the retain"

This was wrong in many ways.  It doesn't fit and the stalky broke.

This reverts commit e288468d384b3a997aa2cb132eca5601fcd18d2e.

3 years agoflyscreen-handle: sort out slopes
Ian Jackson [Fri, 26 Aug 2016 18:35:40 +0000 (19:35 +0100)]
flyscreen-handle: sort out slopes

3 years agoflyscreen-handle: from v6, nicer handle, really
Ian Jackson [Fri, 26 Aug 2016 18:24:06 +0000 (19:24 +0100)]
flyscreen-handle: from v6, nicer handle, really

3 years agoflyscreen-handle: from v6, nicer handle
Ian Jackson [Fri, 26 Aug 2016 18:23:33 +0000 (19:23 +0100)]
flyscreen-handle: from v6, nicer handle

3 years agoflyscreen-handle: from v6, another go at the retain
Ian Jackson [Fri, 26 Aug 2016 18:19:30 +0000 (19:19 +0100)]
flyscreen-handle: from v6, another go at the retain

3 years agoflyscreen-handle: wip sort out new slopes
Ian Jackson [Fri, 26 Aug 2016 18:12:32 +0000 (19:12 +0100)]
flyscreen-handle: wip sort out new slopes

3 years agoflyscreen-handle: need to test again
Ian Jackson [Fri, 26 Aug 2016 17:55:00 +0000 (18:55 +0100)]
flyscreen-handle: need to test again

3 years agoflyscreen-handle: entirely new retain (apropos v5)
Ian Jackson [Fri, 26 Aug 2016 17:52:29 +0000 (18:52 +0100)]
flyscreen-handle: entirely new retain (apropos v5)

3 years agoflyscreen-handle: adjustments from v5 fit measurements
Ian Jackson [Fri, 26 Aug 2016 17:38:50 +0000 (18:38 +0100)]
flyscreen-handle: adjustments from v5 fit measurements

3 years agoflyscreen-handle: take RetainCutout out of HandleSection too
Ian Jackson [Fri, 26 Aug 2016 17:37:10 +0000 (18:37 +0100)]
flyscreen-handle: take RetainCutout out of HandleSection too

NFC with current design

3 years agoflyscreen-handle: better demo
Ian Jackson [Fri, 26 Aug 2016 17:36:57 +0000 (18:36 +0100)]
flyscreen-handle: better demo

3 years agoflyscreen-handle: try full size
Ian Jackson [Fri, 26 Aug 2016 01:23:58 +0000 (02:23 +0100)]
flyscreen-handle: try full size

3 years agoflyscreen-handle: adjustment handle from v3
Ian Jackson [Fri, 26 Aug 2016 01:11:24 +0000 (02:11 +0100)]
flyscreen-handle: adjustment handle from v3

3 years agoflyscreen-handle: adjustments from v3
Ian Jackson [Fri, 26 Aug 2016 01:10:07 +0000 (02:10 +0100)]
flyscreen-handle: adjustments from v3

3 years agoflyscreen-handle: for v3 test
Ian Jackson [Fri, 26 Aug 2016 00:40:17 +0000 (01:40 +0100)]
flyscreen-handle: for v3 test

3 years agoflyscreen-handle: for v3 test
Ian Jackson [Fri, 26 Aug 2016 00:38:50 +0000 (01:38 +0100)]
flyscreen-handle: for v3 test

3 years agoflyscreen-handle: object
Ian Jackson [Fri, 26 Aug 2016 00:38:14 +0000 (01:38 +0100)]
flyscreen-handle: object

3 years agoflyscreen-handle: adjustments from 1st test
Ian Jackson [Fri, 26 Aug 2016 00:21:26 +0000 (01:21 +0100)]
flyscreen-handle: adjustments from 1st test

3 years agoflyscreen-handle: provide GappingSection
Ian Jackson [Fri, 26 Aug 2016 00:13:33 +0000 (01:13 +0100)]
flyscreen-handle: provide GappingSection

3 years agoflyscreen-handle: provide BasicSection
Ian Jackson [Fri, 26 Aug 2016 00:11:16 +0000 (01:11 +0100)]
flyscreen-handle: provide BasicSection

3 years agoflyscreen-handle: topprotr adj
Ian Jackson [Fri, 26 Aug 2016 00:01:44 +0000 (01:01 +0100)]
flyscreen-handle: topprotr adj

3 years agoflyscreen-handle: wip, extrude
Ian Jackson [Thu, 25 Aug 2016 23:56:52 +0000 (00:56 +0100)]
flyscreen-handle: wip, extrude

3 years agoflyscreen-handle: wip, Retain
Ian Jackson [Thu, 25 Aug 2016 23:54:18 +0000 (00:54 +0100)]
flyscreen-handle: wip, Retain

3 years agoflyscreen-handle: wip, HandleSection
Ian Jackson [Thu, 25 Aug 2016 23:46:06 +0000 (00:46 +0100)]
flyscreen-handle: wip, HandleSection

3 years agoflyscreen-handle: wip, HandleSection
Ian Jackson [Thu, 25 Aug 2016 23:42:31 +0000 (00:42 +0100)]
flyscreen-handle: wip, HandleSection

3 years agoflyscreen-handle: wip, HandleSection (nfc)
Ian Jackson [Thu, 25 Aug 2016 23:35:33 +0000 (00:35 +0100)]
flyscreen-handle: wip, HandleSection (nfc)

3 years agoflyscreen-handle: wip, InsertSection
Ian Jackson [Thu, 25 Aug 2016 23:32:34 +0000 (00:32 +0100)]
flyscreen-handle: wip, InsertSection

3 years agolock-inframe-bracket: from v4: intermediate tube size
Ian Jackson [Sun, 14 Aug 2016 21:21:06 +0000 (22:21 +0100)]
lock-inframe-bracket: from v4: intermediate tube size

Looking at v2 v4 and comparing to v3, halfway in between seems likely
to be best.

3 years agoRevert "lock-inframe-bracket: from v2: slightly bigger tube"
Ian Jackson [Sun, 14 Aug 2016 20:35:05 +0000 (21:35 +0100)]
Revert "lock-inframe-bracket: from v2: slightly bigger tube"

from v3: It was better smaller.

This reverts commit 9b804115d06533876d3f5b4731e73481e23e5551.

3 years agolock-inframe-bracket: from v3: slightly smaller lock shaft (really)
Ian Jackson [Sun, 14 Aug 2016 20:32:30 +0000 (21:32 +0100)]
lock-inframe-bracket: from v3: slightly smaller lock shaft (really)

3 years agoRevert "lock-inframe-bracket: from v2: slightly smaller lock shaft"
Ian Jackson [Sun, 14 Aug 2016 20:31:27 +0000 (21:31 +0100)]
Revert "lock-inframe-bracket: from v2: slightly smaller lock shaft"

from v3: Wrong sense !

This reverts commit e20e39f26f3d192ac47977282c17f46a8bca186a.

3 years agolock-inframe-bracket: from v2: slightly bigger tube
Ian Jackson [Sun, 14 Aug 2016 20:05:38 +0000 (21:05 +0100)]
lock-inframe-bracket: from v2: slightly bigger tube

3 years agolock-inframe-bracket: from v2: slightly smaller lock shaft
Ian Jackson [Sun, 14 Aug 2016 20:05:06 +0000 (21:05 +0100)]
lock-inframe-bracket: from v2: slightly smaller lock shaft

3 years agolock-inframe-bracket: for v2: TestClipBoltHole
Ian Jackson [Sun, 14 Aug 2016 18:30:51 +0000 (19:30 +0100)]
lock-inframe-bracket: for v2: TestClipBoltHole

3 years agolock-inframe-bracket: for v2: introduce TestTopEdge
Ian Jackson [Sun, 14 Aug 2016 18:24:06 +0000 (19:24 +0100)]
lock-inframe-bracket: for v2: introduce TestTopEdge

3 years agolock-inframe-bracket: from v1: smaller clip bolt hole
Ian Jackson [Sun, 14 Aug 2016 18:21:55 +0000 (19:21 +0100)]
lock-inframe-bracket: from v1: smaller clip bolt hole

3 years agolock-inframe-bracket: from v1: thinner around tube (so bendier)
Ian Jackson [Sun, 14 Aug 2016 18:20:43 +0000 (19:20 +0100)]
lock-inframe-bracket: from v1: thinner around tube (so bendier)

3 years agolock-inframe-bracket: from v1: bigger tube gap
Ian Jackson [Sun, 14 Aug 2016 18:18:50 +0000 (19:18 +0100)]
lock-inframe-bracket: from v1: bigger tube gap

3 years agolock-inframe-bracket: from v1: bigger tube
Ian Jackson [Sun, 14 Aug 2016 18:17:35 +0000 (19:17 +0100)]
lock-inframe-bracket: from v1: bigger tube

3 years agolock-inframe-bracket: from v1: thicker clip
Ian Jackson [Sun, 14 Aug 2016 18:16:55 +0000 (19:16 +0100)]
lock-inframe-bracket: from v1: thicker clip

3 years agolock-inframe-bracket: from v1: correct lockshaft_dia
Ian Jackson [Sun, 14 Aug 2016 18:16:27 +0000 (19:16 +0100)]
lock-inframe-bracket: from v1: correct lockshaft_dia

3 years agolock-inframe-bracket: from v1: introduce lockshaft_dia (nfc)
Ian Jackson [Sun, 14 Aug 2016 18:16:14 +0000 (19:16 +0100)]
lock-inframe-bracket: from v1: introduce lockshaft_dia (nfc)

3 years agolock-inframe-bracket: Fix front hole position
Ian Jackson [Sun, 14 Aug 2016 14:37:57 +0000 (15:37 +0100)]
lock-inframe-bracket: Fix front hole position

3 years agolock-inframe-bracket: Improve overhang
Ian Jackson [Sun, 14 Aug 2016 14:36:27 +0000 (15:36 +0100)]
lock-inframe-bracket: Improve overhang

3 years agolock-inframe-bracket: Finer
Ian Jackson [Sun, 14 Aug 2016 14:36:06 +0000 (15:36 +0100)]
lock-inframe-bracket: Finer

3 years agolock-inframe-bracket: Bracket
Ian Jackson [Sun, 14 Aug 2016 14:31:30 +0000 (15:31 +0100)]
lock-inframe-bracket: Bracket

3 years agolock-inframe-bracket: Adjust some thicknesses
Ian Jackson [Sun, 14 Aug 2016 14:29:54 +0000 (15:29 +0100)]
lock-inframe-bracket: Adjust some thicknesses

3 years agolock-inframe-bracket: ThroughHoles wip
Ian Jackson [Sun, 14 Aug 2016 14:27:51 +0000 (15:27 +0100)]
lock-inframe-bracket: ThroughHoles wip

3 years agolock-inframe-bracket: MainPositive seem ok
Ian Jackson [Sun, 14 Aug 2016 14:07:31 +0000 (15:07 +0100)]
lock-inframe-bracket: MainPositive seem ok

3 years agolock-inframe-bracket: ClipElevations seem ok
Ian Jackson [Sun, 14 Aug 2016 13:55:41 +0000 (14:55 +0100)]
lock-inframe-bracket: ClipElevations seem ok

3 years agolock-inframe-bracket: wip ClipElevations
Ian Jackson [Sun, 14 Aug 2016 13:50:34 +0000 (14:50 +0100)]
lock-inframe-bracket: wip ClipElevations

3 years agolock-inframe-bracket: rename pump to lock (wtf)
Ian Jackson [Sun, 14 Aug 2016 13:43:21 +0000 (14:43 +0100)]
lock-inframe-bracket: rename pump to lock (wtf)

3 years agopump-inframe-bracket: wip, have (most of) MainPlan
Ian Jackson [Sun, 14 Aug 2016 13:40:29 +0000 (14:40 +0100)]
pump-inframe-bracket: wip, have (most of) MainPlan

3 years agopump-inframe-bracket: wip
Ian Jackson [Sun, 14 Aug 2016 13:33:21 +0000 (14:33 +0100)]
pump-inframe-bracket: wip

3 years agotrackpump-mutlihead-clip: set some convexities
Ian Jackson [Wed, 27 Jul 2016 17:19:34 +0000 (18:19 +0100)]
trackpump-mutlihead-clip: set some convexities

3 years agocable-splice-clamp: adjustments for audio cable join upstairs
Ian Jackson [Tue, 26 Jul 2016 20:55:28 +0000 (21:55 +0100)]
cable-splice-clamp: adjustments for audio cable join upstairs

3 years agocable-splice-clamp: move some other settings up in the file (nfc)
Ian Jackson [Tue, 26 Jul 2016 20:51:12 +0000 (21:51 +0100)]
cable-splice-clamp: move some other settings up in the file (nfc)

3 years agoearring-stand: make Demo into a toplevel
Ian Jackson [Sun, 24 Jul 2016 19:58:55 +0000 (20:58 +0100)]
earring-stand: make Demo into a toplevel

3 years agotrackpump-mutlihead-clip: commitid positive
Ian Jackson [Sun, 24 Jul 2016 17:01:13 +0000 (18:01 +0100)]
trackpump-mutlihead-clip: commitid positive

3 years agotrackpump-mutlihead-clip: commitid
Ian Jackson [Sun, 24 Jul 2016 16:59:53 +0000 (17:59 +0100)]
trackpump-mutlihead-clip: commitid

3 years agotrackpump-mutlihead-clip: new slopy baseplate, seems done
Ian Jackson [Sun, 24 Jul 2016 16:12:02 +0000 (17:12 +0100)]
trackpump-mutlihead-clip: new slopy baseplate, seems done

3 years agotrackpump-mutlihead-clip: new slopy baseplate, wip
Ian Jackson [Sun, 24 Jul 2016 16:08:49 +0000 (17:08 +0100)]
trackpump-mutlihead-clip: new slopy baseplate, wip

3 years agotrackpump-mutlihead-clip: new slopy baseplate, wip
Ian Jackson [Sun, 24 Jul 2016 15:58:05 +0000 (16:58 +0100)]
trackpump-mutlihead-clip: new slopy baseplate, wip

3 years agotrackpump-mutlihead-clip: introduce a hull() (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:52:40 +0000 (16:52 +0100)]
trackpump-mutlihead-clip: introduce a hull() (nfc)

3 years agotrackpump-mutlihead-clip: move baseplate into PumpSide so it can be non-square (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:52:02 +0000 (16:52 +0100)]
trackpump-mutlihead-clip: move baseplate into PumpSide so it can be non-square (nfc)

3 years agotrackpump-mutlihead-clip: lift out xm (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:51:38 +0000 (16:51 +0100)]
trackpump-mutlihead-clip: lift out xm (nfc)

3 years agotrackpump-mutlihead-clip: some tuning
Ian Jackson [Sun, 24 Jul 2016 15:42:45 +0000 (16:42 +0100)]
trackpump-mutlihead-clip: some tuning

3 years agotrackpump-mutlihead-clip: rename hose_side_stalk_width (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:40:37 +0000 (16:40 +0100)]
trackpump-mutlihead-clip: rename hose_side_stalk_width (nfc)

3 years agotrackpump-mutlihead-clip: thinner hose stalk
Ian Jackson [Sun, 24 Jul 2016 15:39:06 +0000 (16:39 +0100)]
trackpump-mutlihead-clip: thinner hose stalk

3 years agotrackpump-mutlihead-clip: smaller baseplate
Ian Jackson [Sun, 24 Jul 2016 15:36:31 +0000 (16:36 +0100)]
trackpump-mutlihead-clip: smaller baseplate

3 years agoearring-stand: commitid on base
Ian Jackson [Sun, 24 Jul 2016 00:07:58 +0000 (01:07 +0100)]
earring-stand: commitid on base

3 years agoearring-stand: final fixes
Ian Jackson [Sun, 24 Jul 2016 00:02:48 +0000 (01:02 +0100)]
earring-stand: final fixes

3 years agoearring-stand: printables
Ian Jackson [Sat, 23 Jul 2016 23:59:14 +0000 (00:59 +0100)]
earring-stand: printables

3 years agoearring-stand: tuning
Ian Jackson [Sat, 23 Jul 2016 23:56:11 +0000 (00:56 +0100)]
earring-stand: tuning

3 years agoearring-stand: abolish front_hex_x_fudge
Ian Jackson [Sat, 23 Jul 2016 23:56:03 +0000 (00:56 +0100)]
earring-stand: abolish front_hex_x_fudge

3 years agoearring-stand: wip FrontPattern adjustments
Ian Jackson [Sat, 23 Jul 2016 23:53:34 +0000 (00:53 +0100)]
earring-stand: wip FrontPattern adjustments

3 years agoearring-stand: wip FrontPattern, and adjustments
Ian Jackson [Sat, 23 Jul 2016 23:50:13 +0000 (00:50 +0100)]
earring-stand: wip FrontPattern, and adjustments

3 years agoearring-stand: wip FrontPattern, break out totalh (nfc)
Ian Jackson [Sat, 23 Jul 2016 23:38:06 +0000 (00:38 +0100)]
earring-stand: wip FrontPattern, break out totalh (nfc)

3 years agoearring-stand: wip FrontPattern
Ian Jackson [Sat, 23 Jul 2016 23:37:12 +0000 (00:37 +0100)]
earring-stand: wip FrontPattern

3 years agoearring-stand: break out FrontPattern (nfc)
Ian Jackson [Sat, 23 Jul 2016 23:30:58 +0000 (00:30 +0100)]
earring-stand: break out FrontPattern (nfc)

3 years agoearring-stand: back tuning
Ian Jackson [Sat, 23 Jul 2016 23:22:16 +0000 (00:22 +0100)]
earring-stand: back tuning

3 years agoearring-stand: back pillars
Ian Jackson [Sat, 23 Jul 2016 23:22:11 +0000 (00:22 +0100)]
earring-stand: back pillars

3 years agoearring-stand: lift out thicks (nfc)
Ian Jackson [Sat, 23 Jul 2016 23:21:35 +0000 (00:21 +0100)]
earring-stand: lift out thicks (nfc)

3 years agoearring-stand: back wip
Ian Jackson [Sat, 23 Jul 2016 23:07:21 +0000 (00:07 +0100)]
earring-stand: back wip

3 years agoearring-stand: replace a -ppxl with eclip_wall_offset
Ian Jackson [Sat, 23 Jul 2016 23:07:14 +0000 (00:07 +0100)]
earring-stand: replace a -ppxl with eclip_wall_offset

3 years agoearring-stand: deal with some comments and formatting
Ian Jackson [Sat, 23 Jul 2016 23:06:59 +0000 (00:06 +0100)]
earring-stand: deal with some comments and formatting

3 years agoearring-stand: fix pr[0]
Ian Jackson [Sat, 23 Jul 2016 23:06:35 +0000 (00:06 +0100)]
earring-stand: fix pr[0]

3 years agoearring-stand: adjust front height
Ian Jackson [Sat, 23 Jul 2016 22:58:51 +0000 (23:58 +0100)]
earring-stand: adjust front height

3 years agoearring-stand: reorient top eclips
Ian Jackson [Sat, 23 Jul 2016 22:58:44 +0000 (23:58 +0100)]
earring-stand: reorient top eclips

3 years agoearring-stand: fix ur
Ian Jackson [Sat, 23 Jul 2016 22:54:18 +0000 (23:54 +0100)]
earring-stand: fix ur

3 years agoearring-stand: remove some debug
Ian Jackson [Sat, 23 Jul 2016 22:52:21 +0000 (23:52 +0100)]
earring-stand: remove some debug

3 years agoearring-stand: wip front
Ian Jackson [Sat, 23 Jul 2016 22:51:53 +0000 (23:51 +0100)]
earring-stand: wip front

3 years agoearring-stand: base base
Ian Jackson [Sat, 23 Jul 2016 22:46:42 +0000 (23:46 +0100)]
earring-stand: base base

3 years agoearring-stand: 3d clips wip adjustments
Ian Jackson [Sat, 23 Jul 2016 22:33:58 +0000 (23:33 +0100)]
earring-stand: 3d clips wip adjustments

3 years agoearring-stand: wip 3d clips in Joins
Ian Jackson [Sat, 23 Jul 2016 19:00:21 +0000 (20:00 +0100)]
earring-stand: wip 3d clips in Joins

3 years agoearring-stand: try eclips other way round
Ian Jackson [Sat, 23 Jul 2016 17:44:00 +0000 (18:44 +0100)]
earring-stand: try eclips other way round

3 years agoearring-stand: try bigger eclip_each_every
Ian Jackson [Sat, 23 Jul 2016 17:41:45 +0000 (18:41 +0100)]
earring-stand: try bigger eclip_each_every