chiark / gitweb /
reprap-play.git
3 years agolock-inframe-bracket: adjustments
Ian Jackson [Wed, 16 Nov 2016 00:50:46 +0000 (00:50 +0000)]
lock-inframe-bracket: adjustments

3 years agolock-inframe-bracket: fix syntax error
Ian Jackson [Wed, 16 Nov 2016 00:48:06 +0000 (00:48 +0000)]
lock-inframe-bracket: fix syntax error

3 years agolock-inframe-bracket: Add ref to Wolfram
Ian Jackson [Wed, 7 Sep 2016 17:04:08 +0000 (18:04 +0100)]
lock-inframe-bracket: Add ref to Wolfram

3 years agolock-inframe-bracket: From mk2 v2: increase back_gap (v2 snapped)
Ian Jackson [Thu, 1 Sep 2016 22:39:21 +0000 (23:39 +0100)]
lock-inframe-bracket: From mk2 v2: increase back_gap (v2 snapped)

3 years agolock-inframe-bracket: Provide tube_rear_extra_th
Ian Jackson [Thu, 1 Sep 2016 18:27:00 +0000 (19:27 +0100)]
lock-inframe-bracket: Provide tube_rear_extra_th

3 years agolock-inframe-bracket: Increase main_th
Ian Jackson [Thu, 1 Sep 2016 18:23:14 +0000 (19:23 +0100)]
lock-inframe-bracket: Increase main_th

3 years agolock-inframe-bracket: Increase back_gap
Ian Jackson [Thu, 1 Sep 2016 18:22:48 +0000 (19:22 +0100)]
lock-inframe-bracket: Increase back_gap

3 years agolock-inframe-bracket: Thicken backflange
Ian Jackson [Thu, 1 Sep 2016 18:21:55 +0000 (19:21 +0100)]
lock-inframe-bracket: Thicken backflange

3 years agolock-inframe-bracket: Adjust join_cr
Ian Jackson [Thu, 1 Sep 2016 18:21:38 +0000 (19:21 +0100)]
lock-inframe-bracket: Adjust join_cr

3 years agolock-inframe-bracket: JoinCirc -> JoinCircs (nfc)
Ian Jackson [Thu, 1 Sep 2016 18:21:11 +0000 (19:21 +0100)]
lock-inframe-bracket: JoinCirc -> JoinCircs (nfc)

3 years agolock-inframe-bracket: MainPlan: add JoinCirc
Ian Jackson [Thu, 1 Sep 2016 18:20:05 +0000 (19:20 +0100)]
lock-inframe-bracket: MainPlan: add JoinCirc

3 years agolock-inframe-bracket: MainPlan: reorg to make cutouts common (nfc)
Ian Jackson [Thu, 1 Sep 2016 17:47:47 +0000 (18:47 +0100)]
lock-inframe-bracket: MainPlan: reorg to make cutouts common (nfc)

3 years agoflyscreen-handle: from v3: add Ribbles to bottom
Ian Jackson [Sun, 28 Aug 2016 13:56:42 +0000 (14:56 +0100)]
flyscreen-handle: from v3: add Ribbles to bottom

3 years agoflyscreen-handle: from v3: break out Ribbles (nfc)
Ian Jackson [Sun, 28 Aug 2016 13:54:51 +0000 (14:54 +0100)]
flyscreen-handle: from v3: break out Ribbles (nfc)

3 years agoflyscreen-handle: from v3: extend bottom
Ian Jackson [Sun, 28 Aug 2016 13:52:41 +0000 (14:52 +0100)]
flyscreen-handle: from v3: extend bottom

3 years agoflyscreen-handle: from v3: Prep for multiple holes in bottom for strap (nfc)
Ian Jackson [Sun, 28 Aug 2016 13:51:31 +0000 (14:51 +0100)]
flyscreen-handle: from v3: Prep for multiple holes in bottom for strap (nfc)

3 years agoflyscreen-handle: looks good, make final
Ian Jackson [Sun, 28 Aug 2016 00:03:01 +0000 (01:03 +0100)]
flyscreen-handle: looks good, make final

3 years agoflyscreen-handle: kit for v3 test
Ian Jackson [Sat, 27 Aug 2016 16:27:26 +0000 (17:27 +0100)]
flyscreen-handle: kit for v3 test

3 years agoflyscreen-handle: from v2 test
Ian Jackson [Sat, 27 Aug 2016 16:25:39 +0000 (17:25 +0100)]
flyscreen-handle: from v2 test

3 years agoflyscreen-handle: kits
Ian Jackson [Sat, 27 Aug 2016 16:22:18 +0000 (17:22 +0100)]
flyscreen-handle: kits

3 years agoflyscreen-handle: separate out test
Ian Jackson [Sat, 27 Aug 2016 16:13:59 +0000 (17:13 +0100)]
flyscreen-handle: separate out test

3 years agoflyscreen-handle: bottom strap too
Ian Jackson [Sat, 27 Aug 2016 16:11:42 +0000 (17:11 +0100)]
flyscreen-handle: bottom strap too

3 years agoflyscreen-handle: from v1, adj protrh
Ian Jackson [Sat, 27 Aug 2016 15:58:33 +0000 (16:58 +0100)]
flyscreen-handle: from v1, adj protrh

3 years agoflyscreen-handle: from v1, adj openingedge
Ian Jackson [Sat, 27 Aug 2016 15:58:17 +0000 (16:58 +0100)]
flyscreen-handle: from v1, adj openingedge

3 years agoflyscreen-handle: bot adj cutout is better
Ian Jackson [Sat, 27 Aug 2016 15:54:57 +0000 (16:54 +0100)]
flyscreen-handle: bot adj cutout is better

3 years agoflyscreen-handle: wip cutout
Ian Jackson [Sat, 27 Aug 2016 15:51:42 +0000 (16:51 +0100)]
flyscreen-handle: wip cutout

3 years agoflyscreen-handle: wip straps
Ian Jackson [Sat, 27 Aug 2016 15:48:41 +0000 (16:48 +0100)]
flyscreen-handle: wip straps

3 years agoflyscreen-handle: Before P9 strap
Ian Jackson [Sat, 27 Aug 2016 15:32:52 +0000 (16:32 +0100)]
flyscreen-handle: Before P9 strap

3 years agoflyscreen-handle: Ribbles
Ian Jackson [Sat, 27 Aug 2016 15:25:29 +0000 (16:25 +0100)]
flyscreen-handle: Ribbles

3 years agoflyscreen-handle: Make top side flat
Ian Jackson [Sat, 27 Aug 2016 15:19:37 +0000 (16:19 +0100)]
flyscreen-handle: Make top side flat

3 years agoflyscreen-handle: New inadj approach, fix undef
Ian Jackson [Sat, 27 Aug 2016 15:13:54 +0000 (16:13 +0100)]
flyscreen-handle: New inadj approach, fix undef

3 years agoflyscreen-handle: New inadj approach, use same P7 always
Ian Jackson [Sat, 27 Aug 2016 15:13:19 +0000 (16:13 +0100)]
flyscreen-handle: New inadj approach, use same P7 always

3 years agoflyscreen-handle: New inadj approach
Ian Jackson [Sat, 27 Aug 2016 15:12:44 +0000 (16:12 +0100)]
flyscreen-handle: New inadj approach

3 years agoflyscreen-handle: LeverSects wip, before bodge P3b
Ian Jackson [Sat, 27 Aug 2016 15:02:56 +0000 (16:02 +0100)]
flyscreen-handle: LeverSects wip, before bodge P3b

3 years agoflyscreen-handle: LeverSects wip, before Test
Ian Jackson [Sat, 27 Aug 2016 14:54:07 +0000 (15:54 +0100)]
flyscreen-handle: LeverSects wip, before Test

3 years agoflyscreen-handle: LeverSects wip, before Test and before adj P8/P9
Ian Jackson [Sat, 27 Aug 2016 14:52:42 +0000 (15:52 +0100)]
flyscreen-handle: LeverSects wip, before Test and before adj P8/P9

3 years agoflyscreen-handle: LeverSects wip
Ian Jackson [Sat, 27 Aug 2016 14:47:06 +0000 (15:47 +0100)]
flyscreen-handle: LeverSects wip

3 years agoflyscreen-handle: wip, Ps etc
Ian Jackson [Sat, 27 Aug 2016 14:35:57 +0000 (15:35 +0100)]
flyscreen-handle: wip, Ps etc

3 years agoflyscreen-handle: wip, Ps etc
Ian Jackson [Sat, 27 Aug 2016 14:31:44 +0000 (15:31 +0100)]
flyscreen-handle: wip, Ps etc

3 years agoflyscreen-handle: wip, Q0 etc
Ian Jackson [Sat, 27 Aug 2016 14:15:10 +0000 (15:15 +0100)]
flyscreen-handle: wip, Q0 etc

3 years agoflyscreen-handle: remeasure
Ian Jackson [Sat, 27 Aug 2016 14:15:01 +0000 (15:15 +0100)]
flyscreen-handle: remeasure

3 years agoflyscreen-handle: start rewrite
Ian Jackson [Sat, 27 Aug 2016 13:47:08 +0000 (14:47 +0100)]
flyscreen-handle: start rewrite

3 years agoflyscreen-handle: peg bases from v10
Ian Jackson [Fri, 26 Aug 2016 20:14:20 +0000 (21:14 +0100)]
flyscreen-handle: peg bases from v10

3 years agoflyscreen-handle: adjustments from v10
Ian Jackson [Fri, 26 Aug 2016 20:11:20 +0000 (21:11 +0100)]
flyscreen-handle: adjustments from v10

3 years agoflyscreen-handle: adjustments for strength (again)
Ian Jackson [Fri, 26 Aug 2016 20:02:49 +0000 (21:02 +0100)]
flyscreen-handle: adjustments for strength (again)

3 years agoflyscreen-handle: adjustments for strength
Ian Jackson [Fri, 26 Aug 2016 20:02:16 +0000 (21:02 +0100)]
flyscreen-handle: adjustments for strength

3 years agoflyscreen-handle: introduce top_w (nfc)
Ian Jackson [Fri, 26 Aug 2016 20:02:09 +0000 (21:02 +0100)]
flyscreen-handle: introduce top_w (nfc)

3 years agoflyscreen-handle: do not make InsertSection get in way of HandleSection
Ian Jackson [Fri, 26 Aug 2016 20:01:40 +0000 (21:01 +0100)]
flyscreen-handle: do not make InsertSection get in way of HandleSection

3 years agoflyscreen-handle: PegTestKit
Ian Jackson [Fri, 26 Aug 2016 19:33:47 +0000 (20:33 +0100)]
flyscreen-handle: PegTestKit

3 years agoflyscreen-handle: Peg, wip, PegSectionSlice (not much functional change)
Ian Jackson [Fri, 26 Aug 2016 19:25:35 +0000 (20:25 +0100)]
flyscreen-handle: Peg, wip, PegSectionSlice (not much functional change)

3 years agoflyscreen-handle: Peg, wip
Ian Jackson [Fri, 26 Aug 2016 19:21:15 +0000 (20:21 +0100)]
flyscreen-handle: Peg, wip

3 years agoflyscreen-handle: tapered peg section
Ian Jackson [Fri, 26 Aug 2016 19:17:18 +0000 (20:17 +0100)]
flyscreen-handle: tapered peg section

3 years agoRevert "flyscreen-handle: wip shorter peg"
Ian Jackson [Fri, 26 Aug 2016 19:14:53 +0000 (20:14 +0100)]
Revert "flyscreen-handle: wip shorter peg"

Actually we are just going to make it narrow at the inside end

This reverts commit 4c698635270c942eca2e1dd8cdc1fc753b8bcf54.

3 years agoflyscreen-handle: wip shorter peg
Ian Jackson [Fri, 26 Aug 2016 19:14:03 +0000 (20:14 +0100)]
flyscreen-handle: wip shorter peg

3 years agoflyscreen-handle: wip pegs
Ian Jackson [Fri, 26 Aug 2016 19:10:57 +0000 (20:10 +0100)]
flyscreen-handle: wip pegs

3 years agoflyscreen-handle: from v8, need to work with pegs
Ian Jackson [Fri, 26 Aug 2016 19:01:04 +0000 (20:01 +0100)]
flyscreen-handle: from v8, need to work with pegs

3 years agoflyscreen-handle: revised approach, for adding pegs
Ian Jackson [Fri, 26 Aug 2016 18:59:05 +0000 (19:59 +0100)]
flyscreen-handle: revised approach, for adding pegs

3 years agoflyscreen-handle: do test v8
Ian Jackson [Fri, 26 Aug 2016 18:39:48 +0000 (19:39 +0100)]
flyscreen-handle: do test v8

3 years agoflyscreen-handle: apropos v6, v7 try new pushmore
Ian Jackson [Fri, 26 Aug 2016 18:39:39 +0000 (19:39 +0100)]
flyscreen-handle: apropos v6, v7 try new pushmore

3 years agoRevert "flyscreen-handle: from v6, another go at the retain"
Ian Jackson [Fri, 26 Aug 2016 18:35:52 +0000 (19:35 +0100)]
Revert "flyscreen-handle: from v6, another go at the retain"

This was wrong in many ways.  It doesn't fit and the stalky broke.

This reverts commit e288468d384b3a997aa2cb132eca5601fcd18d2e.

3 years agoflyscreen-handle: sort out slopes
Ian Jackson [Fri, 26 Aug 2016 18:35:40 +0000 (19:35 +0100)]
flyscreen-handle: sort out slopes

3 years agoflyscreen-handle: from v6, nicer handle, really
Ian Jackson [Fri, 26 Aug 2016 18:24:06 +0000 (19:24 +0100)]
flyscreen-handle: from v6, nicer handle, really

3 years agoflyscreen-handle: from v6, nicer handle
Ian Jackson [Fri, 26 Aug 2016 18:23:33 +0000 (19:23 +0100)]
flyscreen-handle: from v6, nicer handle

3 years agoflyscreen-handle: from v6, another go at the retain
Ian Jackson [Fri, 26 Aug 2016 18:19:30 +0000 (19:19 +0100)]
flyscreen-handle: from v6, another go at the retain

3 years agoflyscreen-handle: wip sort out new slopes
Ian Jackson [Fri, 26 Aug 2016 18:12:32 +0000 (19:12 +0100)]
flyscreen-handle: wip sort out new slopes

3 years agoflyscreen-handle: need to test again
Ian Jackson [Fri, 26 Aug 2016 17:55:00 +0000 (18:55 +0100)]
flyscreen-handle: need to test again

3 years agoflyscreen-handle: entirely new retain (apropos v5)
Ian Jackson [Fri, 26 Aug 2016 17:52:29 +0000 (18:52 +0100)]
flyscreen-handle: entirely new retain (apropos v5)

3 years agoflyscreen-handle: adjustments from v5 fit measurements
Ian Jackson [Fri, 26 Aug 2016 17:38:50 +0000 (18:38 +0100)]
flyscreen-handle: adjustments from v5 fit measurements

3 years agoflyscreen-handle: take RetainCutout out of HandleSection too
Ian Jackson [Fri, 26 Aug 2016 17:37:10 +0000 (18:37 +0100)]
flyscreen-handle: take RetainCutout out of HandleSection too

NFC with current design

3 years agoflyscreen-handle: better demo
Ian Jackson [Fri, 26 Aug 2016 17:36:57 +0000 (18:36 +0100)]
flyscreen-handle: better demo

3 years agoflyscreen-handle: try full size
Ian Jackson [Fri, 26 Aug 2016 01:23:58 +0000 (02:23 +0100)]
flyscreen-handle: try full size

3 years agoflyscreen-handle: adjustment handle from v3
Ian Jackson [Fri, 26 Aug 2016 01:11:24 +0000 (02:11 +0100)]
flyscreen-handle: adjustment handle from v3

3 years agoflyscreen-handle: adjustments from v3
Ian Jackson [Fri, 26 Aug 2016 01:10:07 +0000 (02:10 +0100)]
flyscreen-handle: adjustments from v3

3 years agoflyscreen-handle: for v3 test
Ian Jackson [Fri, 26 Aug 2016 00:40:17 +0000 (01:40 +0100)]
flyscreen-handle: for v3 test

3 years agoflyscreen-handle: for v3 test
Ian Jackson [Fri, 26 Aug 2016 00:38:50 +0000 (01:38 +0100)]
flyscreen-handle: for v3 test

3 years agoflyscreen-handle: object
Ian Jackson [Fri, 26 Aug 2016 00:38:14 +0000 (01:38 +0100)]
flyscreen-handle: object

3 years agoflyscreen-handle: adjustments from 1st test
Ian Jackson [Fri, 26 Aug 2016 00:21:26 +0000 (01:21 +0100)]
flyscreen-handle: adjustments from 1st test

3 years agoflyscreen-handle: provide GappingSection
Ian Jackson [Fri, 26 Aug 2016 00:13:33 +0000 (01:13 +0100)]
flyscreen-handle: provide GappingSection

3 years agoflyscreen-handle: provide BasicSection
Ian Jackson [Fri, 26 Aug 2016 00:11:16 +0000 (01:11 +0100)]
flyscreen-handle: provide BasicSection

3 years agoflyscreen-handle: topprotr adj
Ian Jackson [Fri, 26 Aug 2016 00:01:44 +0000 (01:01 +0100)]
flyscreen-handle: topprotr adj

3 years agoflyscreen-handle: wip, extrude
Ian Jackson [Thu, 25 Aug 2016 23:56:52 +0000 (00:56 +0100)]
flyscreen-handle: wip, extrude

3 years agoflyscreen-handle: wip, Retain
Ian Jackson [Thu, 25 Aug 2016 23:54:18 +0000 (00:54 +0100)]
flyscreen-handle: wip, Retain

3 years agoflyscreen-handle: wip, HandleSection
Ian Jackson [Thu, 25 Aug 2016 23:46:06 +0000 (00:46 +0100)]
flyscreen-handle: wip, HandleSection

3 years agoflyscreen-handle: wip, HandleSection
Ian Jackson [Thu, 25 Aug 2016 23:42:31 +0000 (00:42 +0100)]
flyscreen-handle: wip, HandleSection

3 years agoflyscreen-handle: wip, HandleSection (nfc)
Ian Jackson [Thu, 25 Aug 2016 23:35:33 +0000 (00:35 +0100)]
flyscreen-handle: wip, HandleSection (nfc)

3 years agoflyscreen-handle: wip, InsertSection
Ian Jackson [Thu, 25 Aug 2016 23:32:34 +0000 (00:32 +0100)]
flyscreen-handle: wip, InsertSection

3 years agolock-inframe-bracket: from v4: intermediate tube size
Ian Jackson [Sun, 14 Aug 2016 21:21:06 +0000 (22:21 +0100)]
lock-inframe-bracket: from v4: intermediate tube size

Looking at v2 v4 and comparing to v3, halfway in between seems likely
to be best.

3 years agoRevert "lock-inframe-bracket: from v2: slightly bigger tube"
Ian Jackson [Sun, 14 Aug 2016 20:35:05 +0000 (21:35 +0100)]
Revert "lock-inframe-bracket: from v2: slightly bigger tube"

from v3: It was better smaller.

This reverts commit 9b804115d06533876d3f5b4731e73481e23e5551.

3 years agolock-inframe-bracket: from v3: slightly smaller lock shaft (really)
Ian Jackson [Sun, 14 Aug 2016 20:32:30 +0000 (21:32 +0100)]
lock-inframe-bracket: from v3: slightly smaller lock shaft (really)

3 years agoRevert "lock-inframe-bracket: from v2: slightly smaller lock shaft"
Ian Jackson [Sun, 14 Aug 2016 20:31:27 +0000 (21:31 +0100)]
Revert "lock-inframe-bracket: from v2: slightly smaller lock shaft"

from v3: Wrong sense !

This reverts commit e20e39f26f3d192ac47977282c17f46a8bca186a.

3 years agolock-inframe-bracket: from v2: slightly bigger tube
Ian Jackson [Sun, 14 Aug 2016 20:05:38 +0000 (21:05 +0100)]
lock-inframe-bracket: from v2: slightly bigger tube

3 years agolock-inframe-bracket: from v2: slightly smaller lock shaft
Ian Jackson [Sun, 14 Aug 2016 20:05:06 +0000 (21:05 +0100)]
lock-inframe-bracket: from v2: slightly smaller lock shaft

3 years agolock-inframe-bracket: for v2: TestClipBoltHole
Ian Jackson [Sun, 14 Aug 2016 18:30:51 +0000 (19:30 +0100)]
lock-inframe-bracket: for v2: TestClipBoltHole

3 years agolock-inframe-bracket: for v2: introduce TestTopEdge
Ian Jackson [Sun, 14 Aug 2016 18:24:06 +0000 (19:24 +0100)]
lock-inframe-bracket: for v2: introduce TestTopEdge

3 years agolock-inframe-bracket: from v1: smaller clip bolt hole
Ian Jackson [Sun, 14 Aug 2016 18:21:55 +0000 (19:21 +0100)]
lock-inframe-bracket: from v1: smaller clip bolt hole

3 years agolock-inframe-bracket: from v1: thinner around tube (so bendier)
Ian Jackson [Sun, 14 Aug 2016 18:20:43 +0000 (19:20 +0100)]
lock-inframe-bracket: from v1: thinner around tube (so bendier)

3 years agolock-inframe-bracket: from v1: bigger tube gap
Ian Jackson [Sun, 14 Aug 2016 18:18:50 +0000 (19:18 +0100)]
lock-inframe-bracket: from v1: bigger tube gap

3 years agolock-inframe-bracket: from v1: bigger tube
Ian Jackson [Sun, 14 Aug 2016 18:17:35 +0000 (19:17 +0100)]
lock-inframe-bracket: from v1: bigger tube

3 years agolock-inframe-bracket: from v1: thicker clip
Ian Jackson [Sun, 14 Aug 2016 18:16:55 +0000 (19:16 +0100)]
lock-inframe-bracket: from v1: thicker clip

3 years agolock-inframe-bracket: from v1: correct lockshaft_dia
Ian Jackson [Sun, 14 Aug 2016 18:16:27 +0000 (19:16 +0100)]
lock-inframe-bracket: from v1: correct lockshaft_dia