chiark / gitweb /
Ian Jackson [Fri, 30 Nov 2012 21:08:11 +0000 (21:08 +0000)]
anke-gps-bracket: rename InsertionCube to NestleCube
Ian Jackson [Fri, 30 Nov 2012 21:07:44 +0000 (21:07 +0000)]
anke-gps-bracket: wip InsertionCube
Ian Jackson [Thu, 29 Nov 2012 01:37:21 +0000 (01:37 +0000)]
slic3r-config: increase temperatures since first try at anke-gps-bracket,GpsBody warped
Ian Jackson [Thu, 29 Nov 2012 01:02:41 +0000 (01:02 +0000)]
anke-gps-bracket: move plug slop to one side of plug so it can print
Ian Jackson [Thu, 29 Nov 2012 00:56:59 +0000 (00:56 +0000)]
anke-gps-bracket: remove some size adjustments which trigger a bug in Slic3r 0.9.7
Ian Jackson [Thu, 29 Nov 2012 00:39:41 +0000 (00:39 +0000)]
anke-gps-bracket: post-prototype size adjustments
Ian Jackson [Wed, 28 Nov 2012 22:49:03 +0000 (22:49 +0000)]
pronsolerc: retract and prefeed buttons
Ian Jackson [Wed, 28 Nov 2012 22:38:21 +0000 (22:38 +0000)]
anke-gps-bracket: better list of debugging toplevels - abolish the LHS and RHS here
Ian Jackson [Wed, 28 Nov 2012 22:37:38 +0000 (22:37 +0000)]
anke-gps-bracket: bevel the back
Ian Jackson [Wed, 28 Nov 2012 22:30:03 +0000 (22:30 +0000)]
anke-gps-bracket: should fit in one plate
Ian Jackson [Wed, 28 Nov 2012 22:27:23 +0000 (22:27 +0000)]
anke-gps-bracket: actual sizes
Ian Jackson [Wed, 28 Nov 2012 21:33:03 +0000 (21:33 +0000)]
anke-gps-bracket: body lhs and rhs ok
Ian Jackson [Wed, 28 Nov 2012 21:21:38 +0000 (21:21 +0000)]
anke-gps-bracket: gps assembled ok
Ian Jackson [Wed, 28 Nov 2012 19:04:52 +0000 (19:04 +0000)]
anke-gps-bracket: before plug adjust
Ian Jackson [Wed, 28 Nov 2012 19:02:30 +0000 (19:02 +0000)]
anke-gps-bracket: plugslop
Ian Jackson [Wed, 28 Nov 2012 19:01:01 +0000 (19:01 +0000)]
anke-gps-bracket: initial gps body model
Ian Jackson [Sun, 25 Nov 2012 00:59:18 +0000 (00:59 +0000)]
dungeonquest-cone: One and Four toplevels
Ian Jackson [Sun, 25 Nov 2012 00:50:20 +0000 (00:50 +0000)]
dungeonquest-cone: reduce temperatures
Ian Jackson [Sun, 25 Nov 2012 00:46:55 +0000 (00:46 +0000)]
Merge branch 'master' of chiark:/u/ianmdlvl/reprap/play
Ian Jackson [Sun, 25 Nov 2012 00:46:01 +0000 (00:46 +0000)]
dungeonquest-cone: initial
Ian Jackson [Sat, 24 Nov 2012 22:13:12 +0000 (22:13 +0000)]
filamentspool: FilamentCup: two prongs
Ian Jackson [Sat, 24 Nov 2012 22:12:46 +0000 (22:12 +0000)]
slic3r-config, etc.: increase temperatures, restore extrusion multiplier, suitable for flattish things with poor adhesion
Ian Jackson [Sat, 24 Nov 2012 18:56:31 +0000 (18:56 +0000)]
INSTRUCTIONS: slic3r rune
Ian Jackson [Sat, 17 Nov 2012 17:10:55 +0000 (17:10 +0000)]
xeno-drivebay-bracket: RearCableProtector: add 10mm to protinnerh
Ian Jackson [Sat, 17 Nov 2012 16:12:11 +0000 (16:12 +0000)]
xeno-drivebay-bracket: ChannelBracket: initial
Ian Jackson [Sat, 17 Nov 2012 16:12:02 +0000 (16:12 +0000)]
xeno-drivebay-bracket: ChannelBracket: initial
Ian Jackson [Sat, 17 Nov 2012 16:06:22 +0000 (16:06 +0000)]
xeno-drivebay-bracket: ChannelBracket: wip
Ian Jackson [Sat, 17 Nov 2012 15:37:11 +0000 (15:37 +0000)]
xeno-drivebay-bracket: RearCableProtector: diagonal screw holes
Ian Jackson [Sat, 17 Nov 2012 15:35:29 +0000 (15:35 +0000)]
xeno-drivebay-bracket: initial RearCableProtector
Ian Jackson [Sat, 17 Nov 2012 14:49:03 +0000 (14:49 +0000)]
xeno-drivebay-bracket: try again with no pad (less web)
Ian Jackson [Sat, 17 Nov 2012 14:46:29 +0000 (14:46 +0000)]
xeno-drivebay-bracket: try again with no pad
Ian Jackson [Sat, 17 Nov 2012 13:59:59 +0000 (13:59 +0000)]
xeno-drivebay-bracket: no pads since we need no lid any more
Ian Jackson [Sat, 17 Nov 2012 13:59:45 +0000 (13:59 +0000)]
xeno-drivebay-bracket: remove obsolete setting
Ian Jackson [Mon, 12 Nov 2012 01:34:34 +0000 (01:34 +0000)]
slic3r-config add G1 Z10
Ian Jackson [Sun, 11 Nov 2012 16:27:22 +0000 (16:27 +0000)]
pawn change settings for sticking to new bed
Ian Jackson [Mon, 22 Oct 2012 00:47:41 +0000 (01:47 +0100)]
xeno-drivebay-bracket BracketR came out OK
Ian Jackson [Sun, 21 Oct 2012 23:52:41 +0000 (00:52 +0100)]
xeno-drivebay-bracket final(?) size adjustments
Ian Jackson [Sun, 21 Oct 2012 23:15:20 +0000 (00:15 +0100)]
xeno-drivebay-bracket adjustments
Ian Jackson [Sun, 21 Oct 2012 22:09:02 +0000 (23:09 +0100)]
xeno-drivebay-bracket measurements of screws etc.
Ian Jackson [Sun, 21 Oct 2012 19:04:47 +0000 (20:04 +0100)]
Makefile remove %.slic3r dep, fails to cope if missing
Ian Jackson [Sun, 21 Oct 2012 19:01:10 +0000 (20:01 +0100)]
xeno-drivebay-bracket in Makefile
Ian Jackson [Sun, 21 Oct 2012 18:59:58 +0000 (19:59 +0100)]
xeno-drivebay-bracket fancy web shape, kit, etc.
Ian Jackson [Sun, 21 Oct 2012 18:52:39 +0000 (19:52 +0100)]
xeno-drivebay-bracket fancy wall shape
Ian Jackson [Sun, 21 Oct 2012 18:45:49 +0000 (19:45 +0100)]
xeno-drivebay-bracket before wall polygon
Ian Jackson [Sun, 21 Oct 2012 17:33:32 +0000 (18:33 +0100)]
xeno-drivebay-bracket wip
Ian Jackson [Fri, 19 Oct 2012 21:06:58 +0000 (22:06 +0100)]
pawn good slic3r settings for use with glass bed
Ian Jackson [Fri, 19 Oct 2012 18:33:50 +0000 (19:33 +0100)]
pawn 3 skirts
Ian Jackson [Fri, 19 Oct 2012 18:32:09 +0000 (19:32 +0100)]
Makefile do dependency for %.slic3r
Ian Jackson [Fri, 19 Oct 2012 18:30:35 +0000 (19:30 +0100)]
pawn higher temp for glass bed
Ian Jackson [Thu, 18 Oct 2012 20:01:59 +0000 (21:01 +0100)]
filamenttrestle kit for test #5
Ian Jackson [Thu, 18 Oct 2012 19:59:14 +0000 (20:59 +0100)]
filamenttrestle Trestle adjust pin holes #5
Ian Jackson [Thu, 18 Oct 2012 19:05:56 +0000 (20:05 +0100)]
filamenttrestle Trestle adjust pin holes
Ian Jackson [Thu, 18 Oct 2012 09:15:25 +0000 (10:15 +0100)]
filamenttrestle measurements
Ian Jackson [Thu, 18 Oct 2012 01:43:59 +0000 (02:43 +0100)]
filamenttrestle tuning
Ian Jackson [Thu, 18 Oct 2012 01:30:53 +0000 (02:30 +0100)]
filamenttrestle make bar resolution better
Ian Jackson [Thu, 18 Oct 2012 01:22:21 +0000 (02:22 +0100)]
filamenttrestle make hub more plausible
Ian Jackson [Thu, 18 Oct 2012 01:22:14 +0000 (02:22 +0100)]
filamenttrestle make hub more economical
Ian Jackson [Thu, 18 Oct 2012 00:53:07 +0000 (01:53 +0100)]
filamenttrestle make demo toplevel
Ian Jackson [Thu, 18 Oct 2012 00:52:52 +0000 (01:52 +0100)]
filamenttrestle remove demo
Ian Jackson [Thu, 18 Oct 2012 00:49:09 +0000 (01:49 +0100)]
filamenttrestle pinholes really all the way through
Ian Jackson [Thu, 18 Oct 2012 00:46:15 +0000 (01:46 +0100)]
filamenttrestle TestKit improve
Ian Jackson [Thu, 18 Oct 2012 00:45:53 +0000 (01:45 +0100)]
axlepin provide AxlePin_zoffset
Ian Jackson [Thu, 18 Oct 2012 00:38:37 +0000 (01:38 +0100)]
Makefile %.auto.{scads,stls} rule
Ian Jackson [Thu, 18 Oct 2012 00:31:30 +0000 (01:31 +0100)]
filamenttrestle extend pin
Ian Jackson [Thu, 18 Oct 2012 00:25:26 +0000 (01:25 +0100)]
filamenttrestle colourful demo
Ian Jackson [Thu, 18 Oct 2012 00:25:16 +0000 (01:25 +0100)]
filamenttrestle HubEnd
Ian Jackson [Thu, 18 Oct 2012 00:11:06 +0000 (01:11 +0100)]
filamenttrestle HubEnd
Ian Jackson [Thu, 18 Oct 2012 00:06:29 +0000 (01:06 +0100)]
doveclip break out ExtenderPillar nfc
Ian Jackson [Wed, 17 Oct 2012 23:59:26 +0000 (00:59 +0100)]
filamenttrestle wip HubEnd
Ian Jackson [Wed, 17 Oct 2012 23:54:10 +0000 (00:54 +0100)]
filamenttrestle wip HubEnd
Ian Jackson [Wed, 17 Oct 2012 20:51:33 +0000 (21:51 +0100)]
filamenttrestle pinhole all way through
Ian Jackson [Wed, 17 Oct 2012 20:41:03 +0000 (21:41 +0100)]
filamenttrestle adjustments
Ian Jackson [Wed, 17 Oct 2012 20:30:35 +0000 (21:30 +0100)]
filamenttrestle demo
Ian Jackson [Wed, 17 Oct 2012 20:30:23 +0000 (21:30 +0100)]
axlepin move pin centre to origin
Ian Jackson [Wed, 17 Oct 2012 20:17:33 +0000 (21:17 +0100)]
filamenttrestle new bar
Ian Jackson [Wed, 17 Oct 2012 17:29:48 +0000 (18:29 +0100)]
filamenttrestle wip pin etc.
Ian Jackson [Wed, 17 Oct 2012 17:27:41 +0000 (18:27 +0100)]
axlepin break out Washer from filamentspool
Ian Jackson [Wed, 17 Oct 2012 17:23:32 +0000 (18:23 +0100)]
axlepin break out from filamentspool
Ian Jackson [Wed, 17 Oct 2012 17:06:22 +0000 (18:06 +0100)]
filamenttrestle wip with spool core circular bar
Ian Jackson [Sun, 14 Oct 2012 22:13:44 +0000 (23:13 +0100)]
slic3r-config warptest2 shows that higher temps work better
Ian Jackson [Sun, 14 Oct 2012 21:11:45 +0000 (22:11 +0100)]
slic3r-config: warptest2 shows decreased nozzle temp hurts not helps
Ian Jackson [Sun, 14 Oct 2012 19:27:42 +0000 (20:27 +0100)]
warptest2 before print
Ian Jackson [Thu, 11 Oct 2012 15:41:30 +0000 (16:41 +0100)]
filamenttrestle turn kit on again
Ian Jackson [Thu, 11 Oct 2012 15:41:12 +0000 (16:41 +0100)]
slic3r-config set body temp to 190, help prevent warping?
Ian Jackson [Thu, 11 Oct 2012 15:40:15 +0000 (16:40 +0100)]
filamenttrestle adjustments after 1
Ian Jackson [Thu, 11 Oct 2012 15:00:48 +0000 (16:00 +0100)]
filamenttrestle define toplevels
Ian Jackson [Thu, 11 Oct 2012 15:00:38 +0000 (16:00 +0100)]
pronsolerc work around dodgy temp control by setting ui nozzle temp to 225
Ian Jackson [Thu, 11 Oct 2012 00:42:49 +0000 (01:42 +0100)]
filamenttrestle adjust block hole
Ian Jackson [Thu, 11 Oct 2012 00:42:39 +0000 (01:42 +0100)]
filamenttrestle test kit
Ian Jackson [Thu, 11 Oct 2012 00:34:24 +0000 (01:34 +0100)]
filamenttrestle triangular pins tuning etc.
Ian Jackson [Thu, 11 Oct 2012 00:02:27 +0000 (01:02 +0100)]
filamenttrestle legw, more tuning
Ian Jackson [Wed, 10 Oct 2012 23:59:30 +0000 (00:59 +0100)]
filamenttrestle more tuning
Ian Jackson [Wed, 10 Oct 2012 23:57:00 +0000 (00:57 +0100)]
filamenttrestle thicker block
Ian Jackson [Wed, 10 Oct 2012 23:56:53 +0000 (00:56 +0100)]
filamenttrestle block side thick right
Ian Jackson [Wed, 10 Oct 2012 23:56:10 +0000 (00:56 +0100)]
filamenttrestle pin holes in right place
Ian Jackson [Wed, 10 Oct 2012 23:51:39 +0000 (00:51 +0100)]
filamenttrestle topcyl -> topblock nfc
Ian Jackson [Wed, 10 Oct 2012 23:50:45 +0000 (00:50 +0100)]
filamenttrestle plug hole height adjust right directions
Ian Jackson [Wed, 10 Oct 2012 23:47:16 +0000 (00:47 +0100)]
filamenttrestle plug hole height adjust right direction?
Ian Jackson [Wed, 10 Oct 2012 23:46:59 +0000 (00:46 +0100)]
filamenttrestle wip now triangular pins
Ian Jackson [Wed, 10 Oct 2012 23:31:46 +0000 (00:31 +0100)]
filamenttrestle wip square pin holes, before make triangular
~ianmdlvl / reprap-play.git / log