chiark / gitweb /
reprap-play.git
3 years agoflyscreen-handle: bot adj cutout is better
Ian Jackson [Sat, 27 Aug 2016 15:54:57 +0000 (16:54 +0100)]
flyscreen-handle: bot adj cutout is better

3 years agoflyscreen-handle: wip cutout
Ian Jackson [Sat, 27 Aug 2016 15:51:42 +0000 (16:51 +0100)]
flyscreen-handle: wip cutout

3 years agoflyscreen-handle: wip straps
Ian Jackson [Sat, 27 Aug 2016 15:48:41 +0000 (16:48 +0100)]
flyscreen-handle: wip straps

3 years agoflyscreen-handle: Before P9 strap
Ian Jackson [Sat, 27 Aug 2016 15:32:52 +0000 (16:32 +0100)]
flyscreen-handle: Before P9 strap

3 years agoflyscreen-handle: Ribbles
Ian Jackson [Sat, 27 Aug 2016 15:25:29 +0000 (16:25 +0100)]
flyscreen-handle: Ribbles

3 years agoflyscreen-handle: Make top side flat
Ian Jackson [Sat, 27 Aug 2016 15:19:37 +0000 (16:19 +0100)]
flyscreen-handle: Make top side flat

3 years agoflyscreen-handle: New inadj approach, fix undef
Ian Jackson [Sat, 27 Aug 2016 15:13:54 +0000 (16:13 +0100)]
flyscreen-handle: New inadj approach, fix undef

3 years agoflyscreen-handle: New inadj approach, use same P7 always
Ian Jackson [Sat, 27 Aug 2016 15:13:19 +0000 (16:13 +0100)]
flyscreen-handle: New inadj approach, use same P7 always

3 years agoflyscreen-handle: New inadj approach
Ian Jackson [Sat, 27 Aug 2016 15:12:44 +0000 (16:12 +0100)]
flyscreen-handle: New inadj approach

3 years agoflyscreen-handle: LeverSects wip, before bodge P3b
Ian Jackson [Sat, 27 Aug 2016 15:02:56 +0000 (16:02 +0100)]
flyscreen-handle: LeverSects wip, before bodge P3b

3 years agoflyscreen-handle: LeverSects wip, before Test
Ian Jackson [Sat, 27 Aug 2016 14:54:07 +0000 (15:54 +0100)]
flyscreen-handle: LeverSects wip, before Test

3 years agoflyscreen-handle: LeverSects wip, before Test and before adj P8/P9
Ian Jackson [Sat, 27 Aug 2016 14:52:42 +0000 (15:52 +0100)]
flyscreen-handle: LeverSects wip, before Test and before adj P8/P9

3 years agoflyscreen-handle: LeverSects wip
Ian Jackson [Sat, 27 Aug 2016 14:47:06 +0000 (15:47 +0100)]
flyscreen-handle: LeverSects wip

3 years agoflyscreen-handle: wip, Ps etc
Ian Jackson [Sat, 27 Aug 2016 14:35:57 +0000 (15:35 +0100)]
flyscreen-handle: wip, Ps etc

3 years agoflyscreen-handle: wip, Ps etc
Ian Jackson [Sat, 27 Aug 2016 14:31:44 +0000 (15:31 +0100)]
flyscreen-handle: wip, Ps etc

3 years agoflyscreen-handle: wip, Q0 etc
Ian Jackson [Sat, 27 Aug 2016 14:15:10 +0000 (15:15 +0100)]
flyscreen-handle: wip, Q0 etc

3 years agoflyscreen-handle: remeasure
Ian Jackson [Sat, 27 Aug 2016 14:15:01 +0000 (15:15 +0100)]
flyscreen-handle: remeasure

3 years agoflyscreen-handle: start rewrite
Ian Jackson [Sat, 27 Aug 2016 13:47:08 +0000 (14:47 +0100)]
flyscreen-handle: start rewrite

3 years agoflyscreen-handle: peg bases from v10
Ian Jackson [Fri, 26 Aug 2016 20:14:20 +0000 (21:14 +0100)]
flyscreen-handle: peg bases from v10

3 years agoflyscreen-handle: adjustments from v10
Ian Jackson [Fri, 26 Aug 2016 20:11:20 +0000 (21:11 +0100)]
flyscreen-handle: adjustments from v10

3 years agoflyscreen-handle: adjustments for strength (again)
Ian Jackson [Fri, 26 Aug 2016 20:02:49 +0000 (21:02 +0100)]
flyscreen-handle: adjustments for strength (again)

3 years agoflyscreen-handle: adjustments for strength
Ian Jackson [Fri, 26 Aug 2016 20:02:16 +0000 (21:02 +0100)]
flyscreen-handle: adjustments for strength

3 years agoflyscreen-handle: introduce top_w (nfc)
Ian Jackson [Fri, 26 Aug 2016 20:02:09 +0000 (21:02 +0100)]
flyscreen-handle: introduce top_w (nfc)

3 years agoflyscreen-handle: do not make InsertSection get in way of HandleSection
Ian Jackson [Fri, 26 Aug 2016 20:01:40 +0000 (21:01 +0100)]
flyscreen-handle: do not make InsertSection get in way of HandleSection

3 years agoflyscreen-handle: PegTestKit
Ian Jackson [Fri, 26 Aug 2016 19:33:47 +0000 (20:33 +0100)]
flyscreen-handle: PegTestKit

3 years agoflyscreen-handle: Peg, wip, PegSectionSlice (not much functional change)
Ian Jackson [Fri, 26 Aug 2016 19:25:35 +0000 (20:25 +0100)]
flyscreen-handle: Peg, wip, PegSectionSlice (not much functional change)

3 years agoflyscreen-handle: Peg, wip
Ian Jackson [Fri, 26 Aug 2016 19:21:15 +0000 (20:21 +0100)]
flyscreen-handle: Peg, wip

3 years agoflyscreen-handle: tapered peg section
Ian Jackson [Fri, 26 Aug 2016 19:17:18 +0000 (20:17 +0100)]
flyscreen-handle: tapered peg section

3 years agoRevert "flyscreen-handle: wip shorter peg"
Ian Jackson [Fri, 26 Aug 2016 19:14:53 +0000 (20:14 +0100)]
Revert "flyscreen-handle: wip shorter peg"

Actually we are just going to make it narrow at the inside end

This reverts commit 4c698635270c942eca2e1dd8cdc1fc753b8bcf54.

3 years agoflyscreen-handle: wip shorter peg
Ian Jackson [Fri, 26 Aug 2016 19:14:03 +0000 (20:14 +0100)]
flyscreen-handle: wip shorter peg

3 years agoflyscreen-handle: wip pegs
Ian Jackson [Fri, 26 Aug 2016 19:10:57 +0000 (20:10 +0100)]
flyscreen-handle: wip pegs

3 years agoflyscreen-handle: from v8, need to work with pegs
Ian Jackson [Fri, 26 Aug 2016 19:01:04 +0000 (20:01 +0100)]
flyscreen-handle: from v8, need to work with pegs

3 years agoflyscreen-handle: revised approach, for adding pegs
Ian Jackson [Fri, 26 Aug 2016 18:59:05 +0000 (19:59 +0100)]
flyscreen-handle: revised approach, for adding pegs

3 years agoflyscreen-handle: do test v8
Ian Jackson [Fri, 26 Aug 2016 18:39:48 +0000 (19:39 +0100)]
flyscreen-handle: do test v8

3 years agoflyscreen-handle: apropos v6, v7 try new pushmore
Ian Jackson [Fri, 26 Aug 2016 18:39:39 +0000 (19:39 +0100)]
flyscreen-handle: apropos v6, v7 try new pushmore

3 years agoRevert "flyscreen-handle: from v6, another go at the retain"
Ian Jackson [Fri, 26 Aug 2016 18:35:52 +0000 (19:35 +0100)]
Revert "flyscreen-handle: from v6, another go at the retain"

This was wrong in many ways.  It doesn't fit and the stalky broke.

This reverts commit e288468d384b3a997aa2cb132eca5601fcd18d2e.

3 years agoflyscreen-handle: sort out slopes
Ian Jackson [Fri, 26 Aug 2016 18:35:40 +0000 (19:35 +0100)]
flyscreen-handle: sort out slopes

3 years agoflyscreen-handle: from v6, nicer handle, really
Ian Jackson [Fri, 26 Aug 2016 18:24:06 +0000 (19:24 +0100)]
flyscreen-handle: from v6, nicer handle, really

3 years agoflyscreen-handle: from v6, nicer handle
Ian Jackson [Fri, 26 Aug 2016 18:23:33 +0000 (19:23 +0100)]
flyscreen-handle: from v6, nicer handle

3 years agoflyscreen-handle: from v6, another go at the retain
Ian Jackson [Fri, 26 Aug 2016 18:19:30 +0000 (19:19 +0100)]
flyscreen-handle: from v6, another go at the retain

3 years agoflyscreen-handle: wip sort out new slopes
Ian Jackson [Fri, 26 Aug 2016 18:12:32 +0000 (19:12 +0100)]
flyscreen-handle: wip sort out new slopes

3 years agoflyscreen-handle: need to test again
Ian Jackson [Fri, 26 Aug 2016 17:55:00 +0000 (18:55 +0100)]
flyscreen-handle: need to test again

3 years agoflyscreen-handle: entirely new retain (apropos v5)
Ian Jackson [Fri, 26 Aug 2016 17:52:29 +0000 (18:52 +0100)]
flyscreen-handle: entirely new retain (apropos v5)

3 years agoflyscreen-handle: adjustments from v5 fit measurements
Ian Jackson [Fri, 26 Aug 2016 17:38:50 +0000 (18:38 +0100)]
flyscreen-handle: adjustments from v5 fit measurements

3 years agoflyscreen-handle: take RetainCutout out of HandleSection too
Ian Jackson [Fri, 26 Aug 2016 17:37:10 +0000 (18:37 +0100)]
flyscreen-handle: take RetainCutout out of HandleSection too

NFC with current design

3 years agoflyscreen-handle: better demo
Ian Jackson [Fri, 26 Aug 2016 17:36:57 +0000 (18:36 +0100)]
flyscreen-handle: better demo

3 years agoflyscreen-handle: try full size
Ian Jackson [Fri, 26 Aug 2016 01:23:58 +0000 (02:23 +0100)]
flyscreen-handle: try full size

3 years agoflyscreen-handle: adjustment handle from v3
Ian Jackson [Fri, 26 Aug 2016 01:11:24 +0000 (02:11 +0100)]
flyscreen-handle: adjustment handle from v3

3 years agoflyscreen-handle: adjustments from v3
Ian Jackson [Fri, 26 Aug 2016 01:10:07 +0000 (02:10 +0100)]
flyscreen-handle: adjustments from v3

3 years agoflyscreen-handle: for v3 test
Ian Jackson [Fri, 26 Aug 2016 00:40:17 +0000 (01:40 +0100)]
flyscreen-handle: for v3 test

3 years agoflyscreen-handle: for v3 test
Ian Jackson [Fri, 26 Aug 2016 00:38:50 +0000 (01:38 +0100)]
flyscreen-handle: for v3 test

3 years agoflyscreen-handle: object
Ian Jackson [Fri, 26 Aug 2016 00:38:14 +0000 (01:38 +0100)]
flyscreen-handle: object

3 years agoflyscreen-handle: adjustments from 1st test
Ian Jackson [Fri, 26 Aug 2016 00:21:26 +0000 (01:21 +0100)]
flyscreen-handle: adjustments from 1st test

3 years agoflyscreen-handle: provide GappingSection
Ian Jackson [Fri, 26 Aug 2016 00:13:33 +0000 (01:13 +0100)]
flyscreen-handle: provide GappingSection

3 years agoflyscreen-handle: provide BasicSection
Ian Jackson [Fri, 26 Aug 2016 00:11:16 +0000 (01:11 +0100)]
flyscreen-handle: provide BasicSection

3 years agoflyscreen-handle: topprotr adj
Ian Jackson [Fri, 26 Aug 2016 00:01:44 +0000 (01:01 +0100)]
flyscreen-handle: topprotr adj

3 years agoflyscreen-handle: wip, extrude
Ian Jackson [Thu, 25 Aug 2016 23:56:52 +0000 (00:56 +0100)]
flyscreen-handle: wip, extrude

3 years agoflyscreen-handle: wip, Retain
Ian Jackson [Thu, 25 Aug 2016 23:54:18 +0000 (00:54 +0100)]
flyscreen-handle: wip, Retain

3 years agoflyscreen-handle: wip, HandleSection
Ian Jackson [Thu, 25 Aug 2016 23:46:06 +0000 (00:46 +0100)]
flyscreen-handle: wip, HandleSection

3 years agoflyscreen-handle: wip, HandleSection
Ian Jackson [Thu, 25 Aug 2016 23:42:31 +0000 (00:42 +0100)]
flyscreen-handle: wip, HandleSection

3 years agoflyscreen-handle: wip, HandleSection (nfc)
Ian Jackson [Thu, 25 Aug 2016 23:35:33 +0000 (00:35 +0100)]
flyscreen-handle: wip, HandleSection (nfc)

3 years agoflyscreen-handle: wip, InsertSection
Ian Jackson [Thu, 25 Aug 2016 23:32:34 +0000 (00:32 +0100)]
flyscreen-handle: wip, InsertSection

3 years agolock-inframe-bracket: from v4: intermediate tube size
Ian Jackson [Sun, 14 Aug 2016 21:21:06 +0000 (22:21 +0100)]
lock-inframe-bracket: from v4: intermediate tube size

Looking at v2 v4 and comparing to v3, halfway in between seems likely
to be best.

3 years agoRevert "lock-inframe-bracket: from v2: slightly bigger tube"
Ian Jackson [Sun, 14 Aug 2016 20:35:05 +0000 (21:35 +0100)]
Revert "lock-inframe-bracket: from v2: slightly bigger tube"

from v3: It was better smaller.

This reverts commit 9b804115d06533876d3f5b4731e73481e23e5551.

3 years agolock-inframe-bracket: from v3: slightly smaller lock shaft (really)
Ian Jackson [Sun, 14 Aug 2016 20:32:30 +0000 (21:32 +0100)]
lock-inframe-bracket: from v3: slightly smaller lock shaft (really)

3 years agoRevert "lock-inframe-bracket: from v2: slightly smaller lock shaft"
Ian Jackson [Sun, 14 Aug 2016 20:31:27 +0000 (21:31 +0100)]
Revert "lock-inframe-bracket: from v2: slightly smaller lock shaft"

from v3: Wrong sense !

This reverts commit e20e39f26f3d192ac47977282c17f46a8bca186a.

3 years agolock-inframe-bracket: from v2: slightly bigger tube
Ian Jackson [Sun, 14 Aug 2016 20:05:38 +0000 (21:05 +0100)]
lock-inframe-bracket: from v2: slightly bigger tube

3 years agolock-inframe-bracket: from v2: slightly smaller lock shaft
Ian Jackson [Sun, 14 Aug 2016 20:05:06 +0000 (21:05 +0100)]
lock-inframe-bracket: from v2: slightly smaller lock shaft

3 years agolock-inframe-bracket: for v2: TestClipBoltHole
Ian Jackson [Sun, 14 Aug 2016 18:30:51 +0000 (19:30 +0100)]
lock-inframe-bracket: for v2: TestClipBoltHole

3 years agolock-inframe-bracket: for v2: introduce TestTopEdge
Ian Jackson [Sun, 14 Aug 2016 18:24:06 +0000 (19:24 +0100)]
lock-inframe-bracket: for v2: introduce TestTopEdge

3 years agolock-inframe-bracket: from v1: smaller clip bolt hole
Ian Jackson [Sun, 14 Aug 2016 18:21:55 +0000 (19:21 +0100)]
lock-inframe-bracket: from v1: smaller clip bolt hole

3 years agolock-inframe-bracket: from v1: thinner around tube (so bendier)
Ian Jackson [Sun, 14 Aug 2016 18:20:43 +0000 (19:20 +0100)]
lock-inframe-bracket: from v1: thinner around tube (so bendier)

3 years agolock-inframe-bracket: from v1: bigger tube gap
Ian Jackson [Sun, 14 Aug 2016 18:18:50 +0000 (19:18 +0100)]
lock-inframe-bracket: from v1: bigger tube gap

3 years agolock-inframe-bracket: from v1: bigger tube
Ian Jackson [Sun, 14 Aug 2016 18:17:35 +0000 (19:17 +0100)]
lock-inframe-bracket: from v1: bigger tube

3 years agolock-inframe-bracket: from v1: thicker clip
Ian Jackson [Sun, 14 Aug 2016 18:16:55 +0000 (19:16 +0100)]
lock-inframe-bracket: from v1: thicker clip

3 years agolock-inframe-bracket: from v1: correct lockshaft_dia
Ian Jackson [Sun, 14 Aug 2016 18:16:27 +0000 (19:16 +0100)]
lock-inframe-bracket: from v1: correct lockshaft_dia

3 years agolock-inframe-bracket: from v1: introduce lockshaft_dia (nfc)
Ian Jackson [Sun, 14 Aug 2016 18:16:14 +0000 (19:16 +0100)]
lock-inframe-bracket: from v1: introduce lockshaft_dia (nfc)

3 years agolock-inframe-bracket: Fix front hole position
Ian Jackson [Sun, 14 Aug 2016 14:37:57 +0000 (15:37 +0100)]
lock-inframe-bracket: Fix front hole position

3 years agolock-inframe-bracket: Improve overhang
Ian Jackson [Sun, 14 Aug 2016 14:36:27 +0000 (15:36 +0100)]
lock-inframe-bracket: Improve overhang

3 years agolock-inframe-bracket: Finer
Ian Jackson [Sun, 14 Aug 2016 14:36:06 +0000 (15:36 +0100)]
lock-inframe-bracket: Finer

3 years agolock-inframe-bracket: Bracket
Ian Jackson [Sun, 14 Aug 2016 14:31:30 +0000 (15:31 +0100)]
lock-inframe-bracket: Bracket

3 years agolock-inframe-bracket: Adjust some thicknesses
Ian Jackson [Sun, 14 Aug 2016 14:29:54 +0000 (15:29 +0100)]
lock-inframe-bracket: Adjust some thicknesses

3 years agolock-inframe-bracket: ThroughHoles wip
Ian Jackson [Sun, 14 Aug 2016 14:27:51 +0000 (15:27 +0100)]
lock-inframe-bracket: ThroughHoles wip

3 years agolock-inframe-bracket: MainPositive seem ok
Ian Jackson [Sun, 14 Aug 2016 14:07:31 +0000 (15:07 +0100)]
lock-inframe-bracket: MainPositive seem ok

3 years agolock-inframe-bracket: ClipElevations seem ok
Ian Jackson [Sun, 14 Aug 2016 13:55:41 +0000 (14:55 +0100)]
lock-inframe-bracket: ClipElevations seem ok

3 years agolock-inframe-bracket: wip ClipElevations
Ian Jackson [Sun, 14 Aug 2016 13:50:34 +0000 (14:50 +0100)]
lock-inframe-bracket: wip ClipElevations

3 years agolock-inframe-bracket: rename pump to lock (wtf)
Ian Jackson [Sun, 14 Aug 2016 13:43:21 +0000 (14:43 +0100)]
lock-inframe-bracket: rename pump to lock (wtf)

3 years agopump-inframe-bracket: wip, have (most of) MainPlan
Ian Jackson [Sun, 14 Aug 2016 13:40:29 +0000 (14:40 +0100)]
pump-inframe-bracket: wip, have (most of) MainPlan

3 years agopump-inframe-bracket: wip
Ian Jackson [Sun, 14 Aug 2016 13:33:21 +0000 (14:33 +0100)]
pump-inframe-bracket: wip

3 years agotrackpump-mutlihead-clip: set some convexities
Ian Jackson [Wed, 27 Jul 2016 17:19:34 +0000 (18:19 +0100)]
trackpump-mutlihead-clip: set some convexities

3 years agocable-splice-clamp: adjustments for audio cable join upstairs
Ian Jackson [Tue, 26 Jul 2016 20:55:28 +0000 (21:55 +0100)]
cable-splice-clamp: adjustments for audio cable join upstairs

3 years agocable-splice-clamp: move some other settings up in the file (nfc)
Ian Jackson [Tue, 26 Jul 2016 20:51:12 +0000 (21:51 +0100)]
cable-splice-clamp: move some other settings up in the file (nfc)

3 years agoearring-stand: make Demo into a toplevel
Ian Jackson [Sun, 24 Jul 2016 19:58:55 +0000 (20:58 +0100)]
earring-stand: make Demo into a toplevel

3 years agotrackpump-mutlihead-clip: commitid positive
Ian Jackson [Sun, 24 Jul 2016 17:01:13 +0000 (18:01 +0100)]
trackpump-mutlihead-clip: commitid positive

3 years agotrackpump-mutlihead-clip: commitid
Ian Jackson [Sun, 24 Jul 2016 16:59:53 +0000 (17:59 +0100)]
trackpump-mutlihead-clip: commitid

3 years agotrackpump-mutlihead-clip: new slopy baseplate, seems done
Ian Jackson [Sun, 24 Jul 2016 16:12:02 +0000 (17:12 +0100)]
trackpump-mutlihead-clip: new slopy baseplate, seems done

3 years agotrackpump-mutlihead-clip: new slopy baseplate, wip
Ian Jackson [Sun, 24 Jul 2016 16:08:49 +0000 (17:08 +0100)]
trackpump-mutlihead-clip: new slopy baseplate, wip

3 years agotrackpump-mutlihead-clip: new slopy baseplate, wip
Ian Jackson [Sun, 24 Jul 2016 15:58:05 +0000 (16:58 +0100)]
trackpump-mutlihead-clip: new slopy baseplate, wip

3 years agotrackpump-mutlihead-clip: introduce a hull() (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:52:40 +0000 (16:52 +0100)]
trackpump-mutlihead-clip: introduce a hull() (nfc)

3 years agotrackpump-mutlihead-clip: move baseplate into PumpSide so it can be non-square (nfc)
Ian Jackson [Sun, 24 Jul 2016 15:52:02 +0000 (16:52 +0100)]
trackpump-mutlihead-clip: move baseplate into PumpSide so it can be non-square (nfc)