chiark / gitweb /
reprap-play.git
3 years agopattress-boxes-3-cover: LidSideProfile, wip
Ian Jackson [Fri, 25 Dec 2015 17:33:18 +0000 (17:33 +0000)]
pattress-boxes-3-cover: LidSideProfile, wip

3 years agotest-cup: try this
Ian Jackson [Mon, 21 Dec 2015 21:31:16 +0000 (21:31 +0000)]
test-cup: try this

3 years agoslic3r-config, pronsolerc: Adjust temperatures for new polyethemiride reprap base
Ian Jackson [Fri, 18 Dec 2015 01:25:29 +0000 (01:25 +0000)]
slic3r-config, pronsolerc: Adjust temperatures for new polyethemiride reprap base

3 years agofilamentspool: Introduce channelslop
Ian Jackson [Thu, 17 Dec 2015 10:20:24 +0000 (10:20 +0000)]
filamentspool: Introduce channelslop

3 years agofilamentspool: Add Demo() call to examples at end
Ian Jackson [Thu, 17 Dec 2015 00:40:51 +0000 (00:40 +0000)]
filamentspool: Add Demo() call to examples at end

3 years agofilamentspool: light duty tuning: no changes for other configs
Ian Jackson [Thu, 17 Dec 2015 00:40:11 +0000 (00:40 +0000)]
filamentspool: light duty tuning: no changes for other configs

3 years agofilamentspool: Switch to light duty
Ian Jackson [Thu, 17 Dec 2015 00:39:53 +0000 (00:39 +0000)]
filamentspool: Switch to light duty

3 years agofilamentspool: Provide a rather shonky demo
Ian Jackson [Thu, 17 Dec 2015 00:39:32 +0000 (00:39 +0000)]
filamentspool: Provide a rather shonky demo

3 years agofilamentspool: Fix a bug in dove version introduced with nondove: difference() scope...
Ian Jackson [Thu, 17 Dec 2015 00:39:15 +0000 (00:39 +0000)]
filamentspool: Fix a bug in dove version introduced with nondove: difference() scope was broken

3 years agofilamentspool: Prep a bit more for lightduty (still nfc)
Ian Jackson [Thu, 17 Dec 2015 00:38:31 +0000 (00:38 +0000)]
filamentspool: Prep a bit more for lightduty (still nfc)

3 years agofilamentspool: Prep for 2.85dia lightduty (nfc, even with lightduty)
Ian Jackson [Thu, 17 Dec 2015 00:17:10 +0000 (00:17 +0000)]
filamentspool: Prep for 2.85dia lightduty (nfc, even with lightduty)

3 years agopawn: set dx=0 to avoid rotate_extrude problem
Ian Jackson [Wed, 16 Dec 2015 01:13:40 +0000 (01:13 +0000)]
pawn: set dx=0 to avoid rotate_extrude problem

3 years agopawn: break d into d and dx (nfc)
Ian Jackson [Wed, 16 Dec 2015 01:13:26 +0000 (01:13 +0000)]
pawn: break d into d and dx (nfc)

3 years agofilamentspool: Securing clip slightly smaller wings
Ian Jackson [Tue, 15 Dec 2015 10:40:27 +0000 (10:40 +0000)]
filamentspool: Securing clip slightly smaller wings

3 years agofilamentspool: 3mm: Actually propshift by only 6 to make room for one more lengthwise
Ian Jackson [Tue, 15 Dec 2015 10:39:16 +0000 (10:39 +0000)]
filamentspool: 3mm: Actually propshift by only 6 to make room for one more lengthwise

3 years agofilamentspool: 3mm: Reduce effective rad
Ian Jackson [Tue, 15 Dec 2015 10:34:49 +0000 (10:34 +0000)]
filamentspool: 3mm: Reduce effective rad

3 years agofilamentspool: 3mm: Move cup prop inwards
Ian Jackson [Tue, 15 Dec 2015 10:33:11 +0000 (10:33 +0000)]
filamentspool: 3mm: Move cup prop inwards

3 years agofilamentspool: 3mm: more Hub axle len
Ian Jackson [Tue, 15 Dec 2015 10:29:46 +0000 (10:29 +0000)]
filamentspool: 3mm: more Hub axle len

3 years agofilamentspool: 3mm: Make Hub axle len depend exactly on cupwidth, for reverse mountin...
Ian Jackson [Tue, 15 Dec 2015 10:29:09 +0000 (10:29 +0000)]
filamentspool: 3mm: Make Hub axle len depend exactly on cupwidth, for reverse mounting (nfc)

3 years agofilamentspool: 3mm: Hub bigger axle hole
Ian Jackson [Tue, 15 Dec 2015 10:28:01 +0000 (10:28 +0000)]
filamentspool: 3mm: Hub bigger axle hole

3 years agofilamentspool: 3mm: Hub less chunky
Ian Jackson [Tue, 15 Dec 2015 10:27:24 +0000 (10:27 +0000)]
filamentspool: 3mm: Hub less chunky

3 years agofilamentspool: Bigger bolt hole - apropos test
Ian Jackson [Mon, 14 Dec 2015 21:47:46 +0000 (21:47 +0000)]
filamentspool: Bigger bolt hole - apropos test

3 years agoholetest: a test
Ian Jackson [Mon, 14 Dec 2015 21:15:16 +0000 (21:15 +0000)]
holetest: a test

3 years agofilamentspool: Prep for print
Ian Jackson [Mon, 14 Dec 2015 20:35:56 +0000 (20:35 +0000)]
filamentspool: Prep for print

3 years agofilamentspool: 3mm: Adjust hubaxlelen
Ian Jackson [Mon, 14 Dec 2015 20:35:31 +0000 (20:35 +0000)]
filamentspool: 3mm: Adjust hubaxlelen

3 years agoRevert "filamentspool: 3mm: Increase ArmEnd length"
Ian Jackson [Mon, 14 Dec 2015 20:29:07 +0000 (20:29 +0000)]
Revert "filamentspool: 3mm: Increase ArmEnd length"

This reverts commit f39acfe7642958971ed3dd3f2a26b3eb875cd97e.

3 years agofilamentspool: 3mm: Increase ArmEnd length
Ian Jackson [Mon, 14 Dec 2015 20:27:40 +0000 (20:27 +0000)]
filamentspool: 3mm: Increase ArmEnd length

3 years agofilamentspool: 3mm: Increase cupheight a bit again
Ian Jackson [Mon, 14 Dec 2015 20:26:24 +0000 (20:26 +0000)]
filamentspool: 3mm: Increase cupheight a bit again

3 years agofilamentspool: Introduce armend_length (nfc)
Ian Jackson [Mon, 14 Dec 2015 20:25:15 +0000 (20:25 +0000)]
filamentspool: Introduce armend_length (nfc)

3 years agofilamentspool: 3mm: Adjust cup size
Ian Jackson [Mon, 14 Dec 2015 20:22:21 +0000 (20:22 +0000)]
filamentspool: 3mm: Adjust cup size

3 years agofilamentspool: Reduce 3mm size: Minimum arm overlap
Ian Jackson [Mon, 14 Dec 2015 20:16:41 +0000 (20:16 +0000)]
filamentspool: Reduce 3mm size: Minimum arm overlap

3 years agofilamentspool: Reduce 3mm size: Prep for reduce armbase: add an echo (nfc)
Ian Jackson [Mon, 14 Dec 2015 20:14:57 +0000 (20:14 +0000)]
filamentspool: Reduce 3mm size: Prep for reduce armbase: add an echo (nfc)

3 years agofilamentspool: Reduce 3mm size: reduce arm overlap
Ian Jackson [Mon, 14 Dec 2015 20:13:49 +0000 (20:13 +0000)]
filamentspool: Reduce 3mm size: reduce arm overlap

3 years agofilamentspool: 3mm: Reduce prongthick again, now we have backing spar
Ian Jackson [Mon, 14 Dec 2015 14:08:20 +0000 (14:08 +0000)]
filamentspool: 3mm: Reduce prongthick again, now we have backing spar

3 years agofilamentspool: Cup: add prongrib on side
Ian Jackson [Mon, 14 Dec 2015 14:07:47 +0000 (14:07 +0000)]
filamentspool: Cup: add prongrib on side

3 years agofilamentspool: Cup: Fix extra clip posns when prongthick!=prongwidth
Ian Jackson [Mon, 14 Dec 2015 14:07:36 +0000 (14:07 +0000)]
filamentspool: Cup: Fix extra clip posns when prongthick!=prongwidth

3 years agofilamentspool: Cup: add prongrib on top
Ian Jackson [Mon, 14 Dec 2015 14:01:57 +0000 (14:01 +0000)]
filamentspool: Cup: add prongrib on top

3 years agofilamentspool: 3mm: Reduce prongwidth again, now we have backing spar
Ian Jackson [Mon, 14 Dec 2015 13:55:58 +0000 (13:55 +0000)]
filamentspool: 3mm: Reduce prongwidth again, now we have backing spar

3 years agofilamentspool: 3mm: Cup whitespace change (nfc)
Ian Jackson [Mon, 14 Dec 2015 13:53:31 +0000 (13:53 +0000)]
filamentspool: 3mm: Cup whitespace change (nfc)

3 years agofilamentspool: 3mm: Cup strengthening bar at back
Ian Jackson [Mon, 14 Dec 2015 13:53:10 +0000 (13:53 +0000)]
filamentspool: 3mm: Cup strengthening bar at back

3 years agofilamentspool: Working on Cup
Ian Jackson [Mon, 14 Dec 2015 13:52:35 +0000 (13:52 +0000)]
filamentspool: Working on Cup

3 years agofilamentspool: FilamentCup: introduce baselen (nfc)
Ian Jackson [Mon, 14 Dec 2015 13:33:50 +0000 (13:33 +0000)]
filamentspool: FilamentCup: introduce baselen (nfc)

3 years agofilamentspool: Remove now-redundant and inoperative translate (nfc)
Ian Jackson [Mon, 14 Dec 2015 13:30:12 +0000 (13:30 +0000)]
filamentspool: Remove now-redundant and inoperative translate (nfc)

3 years agofilamentspool: 3mm: Slight reduce radii
Ian Jackson [Mon, 14 Dec 2015 01:40:25 +0000 (01:40 +0000)]
filamentspool: 3mm: Slight reduce radii

3 years agofilamentspool: Add nondove_armhole_slop_x
Ian Jackson [Mon, 14 Dec 2015 01:40:16 +0000 (01:40 +0000)]
filamentspool: Add nondove_armhole_slop_x

3 years agofilamentspool: 3mm: Four arms
Ian Jackson [Mon, 14 Dec 2015 01:20:05 +0000 (01:20 +0000)]
filamentspool: 3mm: Four arms

3 years agofilamentspool: Prep for varying arm number (nfc)
Ian Jackson [Mon, 14 Dec 2015 01:18:58 +0000 (01:18 +0000)]
filamentspool: Prep for varying arm number (nfc)

3 years agofilamentspool: 3mm: Hub non-dove version
Ian Jackson [Mon, 14 Dec 2015 01:10:14 +0000 (01:10 +0000)]
filamentspool: 3mm: Hub non-dove version

3 years agofilamentspool: 3mm: Hub non-dove version prep (nfc if dove)
Ian Jackson [Mon, 14 Dec 2015 00:59:50 +0000 (00:59 +0000)]
filamentspool: 3mm: Hub non-dove version prep (nfc if dove)

3 years agofilamentspool: Reorg so axle hole is subtracted from whole hub, indentation (nfc...
Ian Jackson [Mon, 14 Dec 2015 00:43:04 +0000 (00:43 +0000)]
filamentspool: Reorg so axle hole is subtracted from whole hub, indentation (nfc, ws only)

3 years agofilamentspool: Reorg so axle hole is subtracted from whole hub (nfc)
Ian Jackson [Mon, 14 Dec 2015 00:42:33 +0000 (00:42 +0000)]
filamentspool: Reorg so axle hole is subtracted from whole hub (nfc)

3 years agofilamentspool: Reorg so axle hole is subtracted from whole hub: move some local varia...
Ian Jackson [Mon, 14 Dec 2015 00:54:18 +0000 (00:54 +0000)]
filamentspool: Reorg so axle hole is subtracted from whole hub: move some local variables (nfc)

3 years agofilamentspool: 3mm: bigger hub etc.
Ian Jackson [Mon, 14 Dec 2015 00:40:27 +0000 (00:40 +0000)]
filamentspool: 3mm: bigger hub etc.

3 years agofilamentspool: Move selsz and usedove up (nfc)
Ian Jackson [Mon, 14 Dec 2015 00:39:59 +0000 (00:39 +0000)]
filamentspool: Move selsz and usedove up (nfc)

3 years agofilamentspool: Prep for work on hub
Ian Jackson [Mon, 14 Dec 2015 00:45:08 +0000 (00:45 +0000)]
filamentspool: Prep for work on hub

3 years agofilamentspool: Prep for some test prints
Ian Jackson [Sun, 13 Dec 2015 22:46:43 +0000 (22:46 +0000)]
filamentspool: Prep for some test prints

3 years agofilamentspool: ArmEnd nondove version wip
Ian Jackson [Sun, 13 Dec 2015 22:46:11 +0000 (22:46 +0000)]
filamentspool: ArmEnd nondove version wip

3 years agofilamentspool: Prep ArmEnd for nondove (nfc if dove)
Ian Jackson [Sun, 13 Dec 2015 22:45:45 +0000 (22:45 +0000)]
filamentspool: Prep ArmEnd for nondove (nfc if dove)

3 years agofilamentspool: Prep usedove() nfc
Ian Jackson [Sun, 13 Dec 2015 22:44:52 +0000 (22:44 +0000)]
filamentspool: Prep usedove() nfc

3 years agofilamentspool: CupSecuringClip thicker
Ian Jackson [Sun, 13 Dec 2015 22:08:04 +0000 (22:08 +0000)]
filamentspool: CupSecuringClip thicker

3 years agofilamentspool: CupSecuringClip four handles
Ian Jackson [Sun, 13 Dec 2015 22:06:50 +0000 (22:06 +0000)]
filamentspool: CupSecuringClip four handles

3 years agofilamentspool: Work on CupSecuringClip
Ian Jackson [Sun, 13 Dec 2015 22:06:29 +0000 (22:06 +0000)]
filamentspool: Work on CupSecuringClip

3 years agofilamentspool: 3mm: stalklength even bigger
Ian Jackson [Sun, 13 Dec 2015 22:03:06 +0000 (22:03 +0000)]
filamentspool: 3mm: stalklength even bigger

3 years agofilamentspool: 3mm: stalklength bigger
Ian Jackson [Sun, 13 Dec 2015 21:45:32 +0000 (21:45 +0000)]
filamentspool: 3mm: stalklength bigger

3 years agofilamentspool: 3mm: thicker prongs on cup
Ian Jackson [Sun, 13 Dec 2015 18:25:55 +0000 (18:25 +0000)]
filamentspool: 3mm: thicker prongs on cup

3 years agofilamentspool: 3mm: bigger cup for 3mm x 100m coils
Ian Jackson [Sun, 13 Dec 2015 18:22:49 +0000 (18:22 +0000)]
filamentspool: 3mm: bigger cup for 3mm x 100m coils

3 years agofilamentspool: 3mm: Set for fatter filament
Ian Jackson [Sun, 13 Dec 2015 18:31:43 +0000 (18:31 +0000)]
filamentspool: 3mm: Set for fatter filament

3 years agofilamentspool: 3mm: introduce selsz (nfc)
Ian Jackson [Sun, 13 Dec 2015 21:55:03 +0000 (21:55 +0000)]
filamentspool: 3mm: introduce selsz (nfc)

3 years agofilamentspool: More clips
Ian Jackson [Sun, 13 Dec 2015 21:44:48 +0000 (21:44 +0000)]
filamentspool: More clips

3 years agofilamentspool: Adjust prop for square cup (this time for sure)
Ian Jackson [Sun, 13 Dec 2015 21:53:25 +0000 (21:53 +0000)]
filamentspool: Adjust prop for square cup (this time for sure)

3 years agofilamentspool: Adjust prop for square cup
Ian Jackson [Sun, 13 Dec 2015 21:44:21 +0000 (21:44 +0000)]
filamentspool: Adjust prop for square cup

3 years agofilamentspool: Square cup
Ian Jackson [Sun, 13 Dec 2015 18:19:22 +0000 (18:19 +0000)]
filamentspool: Square cup

3 years agofilamentspool: Before work on TAZ-5 version: another todo for 3mm
Ian Jackson [Sun, 13 Dec 2015 18:23:50 +0000 (18:23 +0000)]
filamentspool: Before work on TAZ-5 version: another todo for 3mm

3 years agofilamentspool: Before work on TAZ-5 version
Ian Jackson [Sun, 13 Dec 2015 18:17:29 +0000 (18:17 +0000)]
filamentspool: Before work on TAZ-5 version

4 years agowarptest3: no, try this
Ian Jackson [Wed, 4 Nov 2015 22:24:40 +0000 (22:24 +0000)]
warptest3: no, try this

4 years agowarptest3: try this
Ian Jackson [Wed, 4 Nov 2015 22:21:49 +0000 (22:21 +0000)]
warptest3: try this

4 years agoled-panel-ceiling-bracket: does not need to be so strong
Ian Jackson [Mon, 2 Nov 2015 00:26:28 +0000 (00:26 +0000)]
led-panel-ceiling-bracket: does not need to be so strong

4 years agoled-panel-ceiling-bracket: invert for printing
Ian Jackson [Mon, 2 Nov 2015 00:11:25 +0000 (00:11 +0000)]
led-panel-ceiling-bracket: invert for printing

4 years agoled-panel-ceiling-bracket: non-countersunk screws, of a different size, and fix hole...
Ian Jackson [Mon, 2 Nov 2015 00:05:27 +0000 (00:05 +0000)]
led-panel-ceiling-bracket: non-countersunk screws, of a different size, and fix hole size

4 years agoled-panel-ceiling-bracket: show remaining wall thickness for bolts
Ian Jackson [Sun, 1 Nov 2015 23:38:01 +0000 (23:38 +0000)]
led-panel-ceiling-bracket: show remaining wall thickness for bolts

4 years agoled-panel-ceiling-bracket: Fix plasplug size
Ian Jackson [Sun, 1 Nov 2015 23:36:19 +0000 (23:36 +0000)]
led-panel-ceiling-bracket: Fix plasplug size

Actual hole size as printed is 3.3mm; want at least 4.2 (call it 4.4)

4 years agoled-panel-ceiling-bracket: fix "bolt hole depth change for 12mm long bolts?"
Ian Jackson [Sun, 1 Nov 2015 23:34:04 +0000 (23:34 +0000)]
led-panel-ceiling-bracket: fix "bolt hole depth change for 12mm long bolts?"

In 97abe544

-bolthead_depth = 5;
+bolthead_depth = 5 + 20 - 8;

is clearly wrong.  We have subtracted 12 from 20 twice but we only
wanted to do it once.

4 years agoled-panel-ceiling-bracket: needs to engage twice as much and nut is 2.7mm thick
Ian Jackson [Sun, 1 Nov 2015 23:30:16 +0000 (23:30 +0000)]
led-panel-ceiling-bracket: needs to engage twice as much and nut is 2.7mm thick

4 years agoled-panel-ceiling-bracket: bolt hole depth change for 12mm long bolts?
Ian Jackson [Fri, 30 Oct 2015 17:34:30 +0000 (17:34 +0000)]
led-panel-ceiling-bracket: bolt hole depth change for 12mm long bolts?

4 years agoled-panel-ceiling-bracket: swap order to make % of cube show us bolt holes (nfc)
Ian Jackson [Fri, 30 Oct 2015 17:34:13 +0000 (17:34 +0000)]
led-panel-ceiling-bracket: swap order to make % of cube show us bolt holes (nfc)

4 years agoled-panel-ceiling-bracket: stronger
Ian Jackson [Thu, 29 Oct 2015 19:57:46 +0000 (19:57 +0000)]
led-panel-ceiling-bracket: stronger

4 years agoled-panel-ceiling-bracket: ready for test?
Ian Jackson [Thu, 29 Oct 2015 19:55:02 +0000 (19:55 +0000)]
led-panel-ceiling-bracket: ready for test?

4 years agoled-panel-ceiling-bracket: wip
Ian Jackson [Thu, 29 Oct 2015 19:47:03 +0000 (19:47 +0000)]
led-panel-ceiling-bracket: wip

4 years agoled-panel-ceiling-bracket: wip
Ian Jackson [Thu, 29 Oct 2015 19:38:50 +0000 (19:38 +0000)]
led-panel-ceiling-bracket: wip

4 years agowarptest: shorter and taller
Ian Jackson [Sun, 25 Oct 2015 15:30:50 +0000 (15:30 +0000)]
warptest: shorter and taller

4 years agowarptest: longer and thinner and taller
Ian Jackson [Sun, 25 Oct 2015 14:04:58 +0000 (14:04 +0000)]
warptest: longer and thinner and taller

4 years agoMakefile: fix warning
Ian Jackson [Sat, 19 Sep 2015 17:04:35 +0000 (18:04 +0100)]
Makefile: fix warning

/home/reprap/play/Makefile:84: *** mixed implicit and normal rules: deprecated syntax
/home/reprap/play/Makefile:95: *** mixed implicit and normal rules: deprecated syntax

4 years agofire-blanket-wall-mushroom: suggestions after print if we want to print a new one
Ian Jackson [Sat, 5 Sep 2015 13:58:37 +0000 (14:58 +0100)]
fire-blanket-wall-mushroom: suggestions after print if we want to print a new one

4 years agofire-blanket-wall-mushroom: adjust fudge
Ian Jackson [Sat, 5 Sep 2015 13:44:26 +0000 (14:44 +0100)]
fire-blanket-wall-mushroom: adjust fudge

4 years agofire-blanket-wall-mushroom: first layer finer
Ian Jackson [Sat, 5 Sep 2015 13:44:17 +0000 (14:44 +0100)]
fire-blanket-wall-mushroom: first layer finer

4 years agofire-blanket-wall-mushroom: fix orentation etc.
Ian Jackson [Sat, 5 Sep 2015 13:43:49 +0000 (14:43 +0100)]
fire-blanket-wall-mushroom: fix orentation etc.

4 years agopronsolerc: Update build area (new pronterface)
Ian Jackson [Sat, 5 Sep 2015 13:43:04 +0000 (14:43 +0100)]
pronsolerc: Update build area (new pronterface)

4 years agofire-blanket-wall-mushroom: bush
Ian Jackson [Sat, 5 Sep 2015 13:33:03 +0000 (14:33 +0100)]
fire-blanket-wall-mushroom: bush

4 years agofire-blanket-wall-mushroom: remove debug
Ian Jackson [Sat, 5 Sep 2015 13:31:32 +0000 (14:31 +0100)]
fire-blanket-wall-mushroom: remove debug

4 years agofire-blanket-wall-mushroom: no csink
Ian Jackson [Sat, 5 Sep 2015 13:31:22 +0000 (14:31 +0100)]
fire-blanket-wall-mushroom: no csink