chiark / gitweb /
Ian Jackson [Sun, 24 Jan 2016 15:43:54 +0000 (15:43 +0000)]
filamentspool: FilamentGuideArm: wip
Ian Jackson [Sun, 24 Jan 2016 15:31:29 +0000 (15:31 +0000)]
filamentspool: FilamentGuideArm: rename FilamentGuideArmShaftPositive from ...Tip... (nfc)
Ian Jackson [Sun, 24 Jan 2016 15:29:39 +0000 (15:29 +0000)]
filamentspool: FilamentGuideArm: break out FilamentGuideArmTipPositive (nfc)
Ian Jackson [Sun, 24 Jan 2016 15:28:55 +0000 (15:28 +0000)]
filamentspool: FilamentGuideArm: wip
Ian Jackson [Sun, 24 Jan 2016 15:21:41 +0000 (15:21 +0000)]
filamentspool: FilamentGuideSpacer: break out guidespacer_armlenslop (nfc)
Ian Jackson [Sun, 24 Jan 2016 15:18:26 +0000 (15:18 +0000)]
filamentspool: FilamentGuideSpacer: add toplevel for test
Ian Jackson [Sun, 24 Jan 2016 15:17:58 +0000 (15:17 +0000)]
filamentspool: FilamentGuideSpacer: separate out slop (nfc)
Ian Jackson [Sat, 23 Jan 2016 21:08:23 +0000 (21:08 +0000)]
filamentspool: FilamentGuideClipSpacerClip: fix wingheight bug
Ian Jackson [Sat, 23 Jan 2016 21:08:10 +0000 (21:08 +0000)]
filamentspool: FilamentGuideClipSpacerClip: adjust hight from v1
Ian Jackson [Sat, 23 Jan 2016 20:04:06 +0000 (20:04 +0000)]
filamentspool: FilamentGuideClipSpacerClip fix
Ian Jackson [Sat, 23 Jan 2016 20:01:50 +0000 (20:01 +0000)]
filamentspool: FilamentGuideClipSpacerClip ready?
Ian Jackson [Sat, 23 Jan 2016 19:42:35 +0000 (19:42 +0000)]
filamentspool: FilamentGuideClipSpacerClip wip
Ian Jackson [Sat, 23 Jan 2016 19:35:45 +0000 (19:35 +0000)]
filamentspool: FilamentGuideClipSpacerClip wip
Ian Jackson [Thu, 14 Jan 2016 00:26:13 +0000 (00:26 +0000)]
filamentspool: Fix typo in doc comment
Ian Jackson [Thu, 14 Jan 2016 00:12:59 +0000 (00:12 +0000)]
filamentspool: Improve doc comment
Ian Jackson [Wed, 13 Jan 2016 23:52:40 +0000 (23:52 +0000)]
Copyright and licence notices (for the things which go into filamentspool, anyway)
Ian Jackson [Wed, 13 Jan 2016 23:43:43 +0000 (23:43 +0000)]
filamentspool: Provide doc comment
Ian Jackson [Wed, 13 Jan 2016 23:43:34 +0000 (23:43 +0000)]
filamentspool: Provide comments for "fdia" and "lightduty"
Ian Jackson [Wed, 13 Jan 2016 23:11:20 +0000 (23:11 +0000)]
Add COPYING and README
Ian Jackson [Wed, 13 Jan 2016 23:06:11 +0000 (23:06 +0000)]
Huxley-INSTRUCTIONS: Rename out of the way
Ian Jackson [Fri, 8 Jan 2016 21:26:19 +0000 (21:26 +0000)]
pattress-boxes-3-cover: Lid: another toplevel test foor convenience
Ian Jackson [Fri, 8 Jan 2016 21:25:49 +0000 (21:25 +0000)]
pattress-boxes-3-cover: Lid: tests reveal that lid needs to be 2mm bigger inside
Ian Jackson [Fri, 8 Jan 2016 20:46:53 +0000 (20:46 +0000)]
pattress-boxes-3-cover: Peg: tests reveal that SZ0 is best
Ian Jackson [Fri, 8 Jan 2016 20:44:19 +0000 (20:44 +0000)]
pattress-boxes-3-cover: in Peg echo the thing that varies
Ian Jackson [Thu, 31 Dec 2015 02:02:35 +0000 (02:02 +0000)]
filamentspool: Storarm: rename unmarked one to Right
Ian Jackson [Thu, 31 Dec 2015 01:59:03 +0000 (01:59 +0000)]
filamentspool: Storarm: LH version
Ian Jackson [Wed, 30 Dec 2015 19:02:04 +0000 (19:02 +0000)]
filamentspool: Storarm: fix axlelen to be right
Ian Jackson [Wed, 30 Dec 2015 18:54:23 +0000 (18:54 +0000)]
filamentspool: Storarm: for tests
Ian Jackson [Wed, 30 Dec 2015 18:52:02 +0000 (18:52 +0000)]
filamentspool: Storarm: mounting holes
Ian Jackson [Wed, 30 Dec 2015 18:44:53 +0000 (18:44 +0000)]
filamentspool: Storarm: Mounting hole positions
Ian Jackson [Wed, 30 Dec 2015 18:28:20 +0000 (18:28 +0000)]
filamentspool: Storarm: prep for mounting holes
Ian Jackson [Wed, 30 Dec 2015 18:27:03 +0000 (18:27 +0000)]
filamentspool: Storarm: wip, base
Ian Jackson [Wed, 30 Dec 2015 17:31:11 +0000 (17:31 +0000)]
Merge branch 'master' of chiark:/u/ianmdlvl/reprap/play
Ian Jackson [Wed, 30 Dec 2015 17:31:03 +0000 (17:31 +0000)]
pattress-boxes-3-cover: prep for printout of full lid
Ian Jackson [Wed, 30 Dec 2015 16:43:41 +0000 (16:43 +0000)]
filamentspool: Storarm wip
Ian Jackson [Wed, 30 Dec 2015 16:43:32 +0000 (16:43 +0000)]
filamentspool: Set lightduty=false, prepping for storagearm
Ian Jackson [Wed, 30 Dec 2015 15:16:05 +0000 (15:16 +0000)]
Merge branch 'master' of chiark:/u/ianmdlvl/reprap/play
Ian Jackson [Wed, 30 Dec 2015 15:16:00 +0000 (15:16 +0000)]
question-question: new object, as printed
Ian Jackson [Wed, 30 Dec 2015 15:13:12 +0000 (15:13 +0000)]
pattress-boxes-3-cover: differentiate $peg_outer_slop_engage; fix $peg_outer_slop to value from v2 #2 (marked "2/ 2")
Ian Jackson [Wed, 30 Dec 2015 15:04:45 +0000 (15:04 +0000)]
pattress-boxes-3-cover: change default $peg_outer_slop, from v2, to match #2
Ian Jackson [Wed, 30 Dec 2015 15:00:24 +0000 (15:00 +0000)]
pattress-boxes-3-cover: echo the various slops (nfc)
Ian Jackson [Tue, 29 Dec 2015 01:40:36 +0000 (01:40 +0000)]
pattress-boxes-3-cover: provide 4 peg outer slop sizes
Ian Jackson [Tue, 29 Dec 2015 01:38:20 +0000 (01:38 +0000)]
pattress-boxes-3-cover: make peg slops dynamic variables
Ian Jackson [Mon, 28 Dec 2015 15:59:07 +0000 (15:59 +0000)]
filamentspool: increase channelslop for lightduty 2.85
Ian Jackson [Mon, 28 Dec 2015 00:45:07 +0000 (00:45 +0000)]
filamentspool: heavy duty: mk2 has slightly less axle len
Ian Jackson [Sun, 27 Dec 2015 21:11:24 +0000 (21:11 +0000)]
pattress-boxes-3-cover: adjust peg_inner_slop: previously peg hole came out dia 3.0 but need 3.5
Ian Jackson [Sat, 26 Dec 2015 23:58:09 +0000 (23:58 +0000)]
pattress-boxes-3-cover: For testing: small total_len
Ian Jackson [Sat, 26 Dec 2015 23:57:43 +0000 (23:57 +0000)]
pattress-boxes-3-cover: LidSideProfile: cope with small total_len
Ian Jackson [Sat, 26 Dec 2015 23:46:54 +0000 (23:46 +0000)]
pattress-boxes-3-cover: RailProfile: introduce lid_rail_strongwall
Ian Jackson [Sat, 26 Dec 2015 23:42:51 +0000 (23:42 +0000)]
pattress-boxes-3-cover: RailProfile: fix an erroneous missing slop
Ian Jackson [Sat, 26 Dec 2015 00:40:00 +0000 (00:40 +0000)]
Makefile: fix "mixed implicit and normal rules"
Fix
Makefile:96: *** mixed implicit and normal rules: deprecated syntax
by splitting these two lines up just as for pandemic-counter*, above.
Ian Jackson [Sat, 26 Dec 2015 00:35:44 +0000 (00:35 +0000)]
pattress-boxes-3-cover: Sort out toplevels
Ian Jackson [Sat, 26 Dec 2015 00:30:57 +0000 (00:30 +0000)]
pattress-boxes-3-cover: Lid
Ian Jackson [Sat, 26 Dec 2015 00:28:23 +0000 (00:28 +0000)]
pattress-boxes-3-cover: Rail rounded end
Ian Jackson [Sat, 26 Dec 2015 00:28:14 +0000 (00:28 +0000)]
pattress-boxes-3-cover: RailProfile, introduce lslop (nfc)
Ian Jackson [Sat, 26 Dec 2015 00:28:01 +0000 (00:28 +0000)]
pattress-boxes-3-cover: Rail, set overlap explicitly
Ian Jackson [Sat, 26 Dec 2015 00:22:43 +0000 (00:22 +0000)]
pattress-boxes-3-cover: Rail, fix len
Ian Jackson [Sat, 26 Dec 2015 00:16:38 +0000 (00:16 +0000)]
pattress-boxes-3-cover: Rail, fix slop
Ian Jackson [Sat, 26 Dec 2015 00:16:15 +0000 (00:16 +0000)]
pattress-boxes-3-cover: Fix Demo with thinbox_front_z
Ian Jackson [Sat, 26 Dec 2015 00:16:06 +0000 (00:16 +0000)]
pattress-boxes-3-cover: introduce thinbox_front_z (nfc)
Ian Jackson [Sat, 26 Dec 2015 00:08:16 +0000 (00:08 +0000)]
pattress-boxes-3-cover: introduce lid_inner_w_nom (nfc)
Ian Jackson [Sat, 26 Dec 2015 00:06:54 +0000 (00:06 +0000)]
pattress-boxes-3-cover: RailProfile, add
Ian Jackson [Fri, 25 Dec 2015 23:55:53 +0000 (23:55 +0000)]
pattress-boxes-3-cover: Rename "rail" to "seatline"
Ian Jackson [Fri, 25 Dec 2015 23:53:30 +0000 (23:53 +0000)]
pattress-boxes-3-cover: Demo, add Pegs
Ian Jackson [Fri, 25 Dec 2015 23:53:22 +0000 (23:53 +0000)]
pattress-boxes-3-cover: Fix lid_side_slop to be each side
Ian Jackson [Fri, 25 Dec 2015 23:49:40 +0000 (23:49 +0000)]
pattress-boxes-3-cover: Demo, wip
Ian Jackson [Fri, 25 Dec 2015 18:15:52 +0000 (18:15 +0000)]
pattress-boxes-3-cover: TopPattressBox, wip
Ian Jackson [Fri, 25 Dec 2015 18:11:44 +0000 (18:11 +0000)]
pattress-boxes-3-cover: Peg, wip
Ian Jackson [Fri, 25 Dec 2015 18:09:52 +0000 (18:09 +0000)]
pattress-boxes-3-cover: PegProfile, wip
Ian Jackson [Fri, 25 Dec 2015 17:56:36 +0000 (17:56 +0000)]
pattress-boxes-3-cover: LidSide, top
Ian Jackson [Fri, 25 Dec 2015 17:51:01 +0000 (17:51 +0000)]
pattress-boxes-3-cover: LidSide, increase lid_fatbox_overlap
Ian Jackson [Fri, 25 Dec 2015 17:50:39 +0000 (17:50 +0000)]
pattress-boxes-3-cover: LidSide, split lid_box_overlap into lid_thinboxbase_overlap and lid_fatbox_overlap (nfc)
Ian Jackson [Fri, 25 Dec 2015 17:47:58 +0000 (17:47 +0000)]
pattress-boxes-3-cover: LidSide, introduce lid_inner_w (nfc)
Ian Jackson [Fri, 25 Dec 2015 17:46:52 +0000 (17:46 +0000)]
pattress-boxes-3-cover: LidSide, wip
Ian Jackson [Fri, 25 Dec 2015 17:38:13 +0000 (17:38 +0000)]
pattress-boxes-3-cover: LidSide, wip
Ian Jackson [Fri, 25 Dec 2015 17:33:18 +0000 (17:33 +0000)]
pattress-boxes-3-cover: LidSideProfile, wip
Ian Jackson [Mon, 21 Dec 2015 21:31:16 +0000 (21:31 +0000)]
test-cup: try this
Ian Jackson [Fri, 18 Dec 2015 01:25:29 +0000 (01:25 +0000)]
slic3r-config, pronsolerc: Adjust temperatures for new polyethemiride reprap base
Ian Jackson [Thu, 17 Dec 2015 10:20:24 +0000 (10:20 +0000)]
filamentspool: Introduce channelslop
Ian Jackson [Thu, 17 Dec 2015 00:40:51 +0000 (00:40 +0000)]
filamentspool: Add Demo() call to examples at end
Ian Jackson [Thu, 17 Dec 2015 00:40:11 +0000 (00:40 +0000)]
filamentspool: light duty tuning: no changes for other configs
Ian Jackson [Thu, 17 Dec 2015 00:39:53 +0000 (00:39 +0000)]
filamentspool: Switch to light duty
Ian Jackson [Thu, 17 Dec 2015 00:39:32 +0000 (00:39 +0000)]
filamentspool: Provide a rather shonky demo
Ian Jackson [Thu, 17 Dec 2015 00:39:15 +0000 (00:39 +0000)]
filamentspool: Fix a bug in dove version introduced with nondove: difference() scope was broken
Ian Jackson [Thu, 17 Dec 2015 00:38:31 +0000 (00:38 +0000)]
filamentspool: Prep a bit more for lightduty (still nfc)
Ian Jackson [Thu, 17 Dec 2015 00:17:10 +0000 (00:17 +0000)]
filamentspool: Prep for 2.85dia lightduty (nfc, even with lightduty)
Ian Jackson [Wed, 16 Dec 2015 01:13:40 +0000 (01:13 +0000)]
pawn: set dx=0 to avoid rotate_extrude problem
Ian Jackson [Wed, 16 Dec 2015 01:13:26 +0000 (01:13 +0000)]
pawn: break d into d and dx (nfc)
Ian Jackson [Tue, 15 Dec 2015 10:40:27 +0000 (10:40 +0000)]
filamentspool: Securing clip slightly smaller wings
Ian Jackson [Tue, 15 Dec 2015 10:39:16 +0000 (10:39 +0000)]
filamentspool: 3mm: Actually propshift by only 6 to make room for one more lengthwise
Ian Jackson [Tue, 15 Dec 2015 10:34:49 +0000 (10:34 +0000)]
filamentspool: 3mm: Reduce effective rad
Ian Jackson [Tue, 15 Dec 2015 10:33:11 +0000 (10:33 +0000)]
filamentspool: 3mm: Move cup prop inwards
Ian Jackson [Tue, 15 Dec 2015 10:29:46 +0000 (10:29 +0000)]
filamentspool: 3mm: more Hub axle len
Ian Jackson [Tue, 15 Dec 2015 10:29:09 +0000 (10:29 +0000)]
filamentspool: 3mm: Make Hub axle len depend exactly on cupwidth, for reverse mounting (nfc)
Ian Jackson [Tue, 15 Dec 2015 10:28:01 +0000 (10:28 +0000)]
filamentspool: 3mm: Hub bigger axle hole
Ian Jackson [Tue, 15 Dec 2015 10:27:24 +0000 (10:27 +0000)]
filamentspool: 3mm: Hub less chunky
Ian Jackson [Mon, 14 Dec 2015 21:47:46 +0000 (21:47 +0000)]
filamentspool: Bigger bolt hole - apropos test
Ian Jackson [Mon, 14 Dec 2015 21:15:16 +0000 (21:15 +0000)]
holetest: a test
Ian Jackson [Mon, 14 Dec 2015 20:35:56 +0000 (20:35 +0000)]
filamentspool: Prep for print
Ian Jackson [Mon, 14 Dec 2015 20:35:31 +0000 (20:35 +0000)]
filamentspool: 3mm: Adjust hubaxlelen
~ianmdlvl / reprap-play.git / log