chiark / gitweb /
reprap-play.git
6 years agoMakefile remove %.slic3r dep, fails to cope if missing
Ian Jackson [Sun, 21 Oct 2012 19:04:47 +0000 (20:04 +0100)]
Makefile remove %.slic3r dep, fails to cope if missing

6 years agoxeno-drivebay-bracket in Makefile
Ian Jackson [Sun, 21 Oct 2012 19:01:10 +0000 (20:01 +0100)]
xeno-drivebay-bracket in Makefile

6 years agoxeno-drivebay-bracket fancy web shape, kit, etc.
Ian Jackson [Sun, 21 Oct 2012 18:59:58 +0000 (19:59 +0100)]
xeno-drivebay-bracket fancy web shape, kit, etc.

6 years agoxeno-drivebay-bracket fancy wall shape
Ian Jackson [Sun, 21 Oct 2012 18:52:39 +0000 (19:52 +0100)]
xeno-drivebay-bracket fancy wall shape

6 years agoxeno-drivebay-bracket before wall polygon
Ian Jackson [Sun, 21 Oct 2012 18:45:49 +0000 (19:45 +0100)]
xeno-drivebay-bracket before wall polygon

6 years agoxeno-drivebay-bracket wip
Ian Jackson [Sun, 21 Oct 2012 17:33:32 +0000 (18:33 +0100)]
xeno-drivebay-bracket wip

6 years agopawn good slic3r settings for use with glass bed
Ian Jackson [Fri, 19 Oct 2012 21:06:58 +0000 (22:06 +0100)]
pawn  good slic3r settings for use with glass bed

6 years agopawn 3 skirts
Ian Jackson [Fri, 19 Oct 2012 18:33:50 +0000 (19:33 +0100)]
pawn 3 skirts

6 years agoMakefile do dependency for %.slic3r
Ian Jackson [Fri, 19 Oct 2012 18:32:09 +0000 (19:32 +0100)]
Makefile do dependency for %.slic3r

6 years agopawn higher temp for glass bed
Ian Jackson [Fri, 19 Oct 2012 18:30:35 +0000 (19:30 +0100)]
pawn higher temp for glass bed

6 years agofilamenttrestle kit for test #5
Ian Jackson [Thu, 18 Oct 2012 20:01:59 +0000 (21:01 +0100)]
filamenttrestle kit for test #5

6 years agofilamenttrestle Trestle adjust pin holes #5
Ian Jackson [Thu, 18 Oct 2012 19:59:14 +0000 (20:59 +0100)]
filamenttrestle Trestle adjust pin holes #5

6 years agofilamenttrestle Trestle adjust pin holes
Ian Jackson [Thu, 18 Oct 2012 19:05:56 +0000 (20:05 +0100)]
filamenttrestle Trestle adjust pin holes

6 years agofilamenttrestle measurements
Ian Jackson [Thu, 18 Oct 2012 09:15:25 +0000 (10:15 +0100)]
filamenttrestle measurements

6 years agofilamenttrestle tuning
Ian Jackson [Thu, 18 Oct 2012 01:43:59 +0000 (02:43 +0100)]
filamenttrestle tuning

6 years agofilamenttrestle make bar resolution better
Ian Jackson [Thu, 18 Oct 2012 01:30:53 +0000 (02:30 +0100)]
filamenttrestle make bar resolution better

6 years agofilamenttrestle make hub more plausible
Ian Jackson [Thu, 18 Oct 2012 01:22:21 +0000 (02:22 +0100)]
filamenttrestle make hub more plausible

6 years agofilamenttrestle make hub more economical
Ian Jackson [Thu, 18 Oct 2012 01:22:14 +0000 (02:22 +0100)]
filamenttrestle make hub more economical

6 years agofilamenttrestle make demo toplevel
Ian Jackson [Thu, 18 Oct 2012 00:53:07 +0000 (01:53 +0100)]
filamenttrestle make demo toplevel

6 years agofilamenttrestle remove demo
Ian Jackson [Thu, 18 Oct 2012 00:52:52 +0000 (01:52 +0100)]
filamenttrestle remove demo

6 years agofilamenttrestle pinholes really all the way through
Ian Jackson [Thu, 18 Oct 2012 00:49:09 +0000 (01:49 +0100)]
filamenttrestle pinholes really all the way through

6 years agofilamenttrestle TestKit improve
Ian Jackson [Thu, 18 Oct 2012 00:46:15 +0000 (01:46 +0100)]
filamenttrestle TestKit improve

6 years agoaxlepin provide AxlePin_zoffset
Ian Jackson [Thu, 18 Oct 2012 00:45:53 +0000 (01:45 +0100)]
axlepin provide AxlePin_zoffset

6 years agoMakefile %.auto.{scads,stls} rule
Ian Jackson [Thu, 18 Oct 2012 00:38:37 +0000 (01:38 +0100)]
Makefile %.auto.{scads,stls} rule

6 years agofilamenttrestle extend pin
Ian Jackson [Thu, 18 Oct 2012 00:31:30 +0000 (01:31 +0100)]
filamenttrestle extend pin

6 years agofilamenttrestle colourful demo
Ian Jackson [Thu, 18 Oct 2012 00:25:26 +0000 (01:25 +0100)]
filamenttrestle colourful demo

6 years agofilamenttrestle HubEnd
Ian Jackson [Thu, 18 Oct 2012 00:25:16 +0000 (01:25 +0100)]
filamenttrestle HubEnd

6 years agofilamenttrestle HubEnd
Ian Jackson [Thu, 18 Oct 2012 00:11:06 +0000 (01:11 +0100)]
filamenttrestle HubEnd

6 years agodoveclip break out ExtenderPillar nfc
Ian Jackson [Thu, 18 Oct 2012 00:06:29 +0000 (01:06 +0100)]
doveclip break out ExtenderPillar nfc

6 years agofilamenttrestle wip HubEnd
Ian Jackson [Wed, 17 Oct 2012 23:59:26 +0000 (00:59 +0100)]
filamenttrestle wip HubEnd

6 years agofilamenttrestle wip HubEnd
Ian Jackson [Wed, 17 Oct 2012 23:54:10 +0000 (00:54 +0100)]
filamenttrestle wip HubEnd

6 years agofilamenttrestle pinhole all way through
Ian Jackson [Wed, 17 Oct 2012 20:51:33 +0000 (21:51 +0100)]
filamenttrestle pinhole all way through

6 years agofilamenttrestle adjustments
Ian Jackson [Wed, 17 Oct 2012 20:41:03 +0000 (21:41 +0100)]
filamenttrestle adjustments

6 years agofilamenttrestle demo
Ian Jackson [Wed, 17 Oct 2012 20:30:35 +0000 (21:30 +0100)]
filamenttrestle demo

6 years agoaxlepin move pin centre to origin
Ian Jackson [Wed, 17 Oct 2012 20:30:23 +0000 (21:30 +0100)]
axlepin  move pin centre to origin

6 years agofilamenttrestle new bar
Ian Jackson [Wed, 17 Oct 2012 20:17:33 +0000 (21:17 +0100)]
filamenttrestle new bar

6 years agofilamenttrestle wip pin etc.
Ian Jackson [Wed, 17 Oct 2012 17:29:48 +0000 (18:29 +0100)]
filamenttrestle wip pin etc.

6 years agoaxlepin break out Washer from filamentspool
Ian Jackson [Wed, 17 Oct 2012 17:27:41 +0000 (18:27 +0100)]
axlepin  break out Washer from filamentspool

6 years agoaxlepin break out from filamentspool
Ian Jackson [Wed, 17 Oct 2012 17:23:32 +0000 (18:23 +0100)]
axlepin  break out from filamentspool

6 years agofilamenttrestle wip with spool core circular bar
Ian Jackson [Wed, 17 Oct 2012 17:06:22 +0000 (18:06 +0100)]
filamenttrestle wip  with spool core  circular bar

7 years agoslic3r-config warptest2 shows that higher temps work better
Ian Jackson [Sun, 14 Oct 2012 22:13:44 +0000 (23:13 +0100)]
slic3r-config warptest2 shows that higher temps work better

7 years agoslic3r-config: warptest2 shows decreased nozzle temp hurts not helps
Ian Jackson [Sun, 14 Oct 2012 21:11:45 +0000 (22:11 +0100)]
slic3r-config: warptest2 shows decreased nozzle temp hurts not helps

7 years agowarptest2 before print
Ian Jackson [Sun, 14 Oct 2012 19:27:42 +0000 (20:27 +0100)]
warptest2 before print

7 years agofilamenttrestle turn kit on again
Ian Jackson [Thu, 11 Oct 2012 15:41:30 +0000 (16:41 +0100)]
filamenttrestle turn kit on again

7 years agoslic3r-config set body temp to 190, help prevent warping?
Ian Jackson [Thu, 11 Oct 2012 15:41:12 +0000 (16:41 +0100)]
slic3r-config set body temp to 190, help prevent warping?

7 years agofilamenttrestle adjustments after 1
Ian Jackson [Thu, 11 Oct 2012 15:40:15 +0000 (16:40 +0100)]
filamenttrestle adjustments after 1

7 years agofilamenttrestle define toplevels
Ian Jackson [Thu, 11 Oct 2012 15:00:48 +0000 (16:00 +0100)]
filamenttrestle define toplevels

7 years agopronsolerc work around dodgy temp control by setting ui nozzle temp to 225
Ian Jackson [Thu, 11 Oct 2012 15:00:38 +0000 (16:00 +0100)]
pronsolerc work around dodgy temp control by setting ui nozzle temp to 225

7 years agofilamenttrestle adjust block hole
Ian Jackson [Thu, 11 Oct 2012 00:42:49 +0000 (01:42 +0100)]
filamenttrestle adjust block hole

7 years agofilamenttrestle test kit
Ian Jackson [Thu, 11 Oct 2012 00:42:39 +0000 (01:42 +0100)]
filamenttrestle test kit

7 years agofilamenttrestle triangular pins tuning etc.
Ian Jackson [Thu, 11 Oct 2012 00:34:24 +0000 (01:34 +0100)]
filamenttrestle triangular pins tuning etc.

7 years agofilamenttrestle legw, more tuning
Ian Jackson [Thu, 11 Oct 2012 00:02:27 +0000 (01:02 +0100)]
filamenttrestle legw, more tuning

7 years agofilamenttrestle more tuning
Ian Jackson [Wed, 10 Oct 2012 23:59:30 +0000 (00:59 +0100)]
filamenttrestle more tuning

7 years agofilamenttrestle thicker block
Ian Jackson [Wed, 10 Oct 2012 23:57:00 +0000 (00:57 +0100)]
filamenttrestle thicker block

7 years agofilamenttrestle block side thick right
Ian Jackson [Wed, 10 Oct 2012 23:56:53 +0000 (00:56 +0100)]
filamenttrestle block side thick right

7 years agofilamenttrestle pin holes in right place
Ian Jackson [Wed, 10 Oct 2012 23:56:10 +0000 (00:56 +0100)]
filamenttrestle pin holes in right place

7 years agofilamenttrestle topcyl -> topblock nfc
Ian Jackson [Wed, 10 Oct 2012 23:51:39 +0000 (00:51 +0100)]
filamenttrestle topcyl -> topblock nfc

7 years agofilamenttrestle plug hole height adjust right directions
Ian Jackson [Wed, 10 Oct 2012 23:50:45 +0000 (00:50 +0100)]
filamenttrestle plug hole height adjust right directions

7 years agofilamenttrestle plug hole height adjust right direction?
Ian Jackson [Wed, 10 Oct 2012 23:47:16 +0000 (00:47 +0100)]
filamenttrestle plug hole height adjust right direction?

7 years agofilamenttrestle wip now triangular pins
Ian Jackson [Wed, 10 Oct 2012 23:46:59 +0000 (00:46 +0100)]
filamenttrestle wip now triangular pins

7 years agofilamenttrestle wip square pin holes, before make triangular
Ian Jackson [Wed, 10 Oct 2012 23:31:46 +0000 (00:31 +0100)]
filamenttrestle wip square pin holes, before make triangular

7 years agofilamenttrestle wip square pin holes
Ian Jackson [Wed, 10 Oct 2012 20:47:14 +0000 (21:47 +0100)]
filamenttrestle wip square pin holes

7 years agofilamenttrestle wip pin holes
Ian Jackson [Wed, 10 Oct 2012 20:39:21 +0000 (21:39 +0100)]
filamenttrestle wip pin holes

7 years agoMerge branch 'master' of chiark:/u/ianmdlvl/reprap/play
Ian Jackson [Wed, 10 Oct 2012 20:23:43 +0000 (21:23 +0100)]
Merge branch 'master' of chiark:/u/ianmdlvl/reprap/play

7 years agoMakefiles etc.: support *.slic3r files and move pawn cooler into it; nfc
Ian Jackson [Wed, 10 Oct 2012 20:18:10 +0000 (21:18 +0100)]
Makefiles etc.: support *.slic3r files and move pawn cooler into it; nfc

7 years agopawn cooler is good, try bigger
Ian Jackson [Sun, 7 Oct 2012 20:54:14 +0000 (21:54 +0100)]
pawn cooler is good, try bigger

7 years agopawn try cooler
Ian Jackson [Sun, 7 Oct 2012 20:25:24 +0000 (21:25 +0100)]
pawn try cooler

7 years agotrailerhubcap for print
Ian Jackson [Sun, 7 Oct 2012 20:01:31 +0000 (21:01 +0100)]
trailerhubcap for print

7 years agofilamenttrestle wip wedges
Ian Jackson [Sun, 7 Oct 2012 19:56:44 +0000 (20:56 +0100)]
filamenttrestle wip wedges

7 years agofilamenttrestle wip before wedges
Ian Jackson [Sun, 7 Oct 2012 19:13:33 +0000 (20:13 +0100)]
filamenttrestle wip before wedges

7 years agofilamenttrestle wip legs basewebs
Ian Jackson [Sun, 7 Oct 2012 16:49:32 +0000 (17:49 +0100)]
filamenttrestle wip legs basewebs

7 years agodoveclip ExtenderPillars optional baseweb
Ian Jackson [Sun, 7 Oct 2012 16:46:51 +0000 (17:46 +0100)]
doveclip ExtenderPillars optional baseweb

7 years agofilamenttrestle wip trestle looks good
Ian Jackson [Sun, 7 Oct 2012 15:35:22 +0000 (16:35 +0100)]
filamenttrestle wip trestle looks good

7 years agofilamenttrestle wip plug fix some dimensions nfc
Ian Jackson [Sun, 7 Oct 2012 15:04:08 +0000 (16:04 +0100)]
filamenttrestle wip plug fix some dimensions nfc

7 years agofilamenttrestle wip plug good
Ian Jackson [Sun, 7 Oct 2012 15:00:54 +0000 (16:00 +0100)]
filamenttrestle wip plug good

7 years agoRevert "filamenttrestle wip use prong, before abandon prong"
Ian Jackson [Sun, 7 Oct 2012 14:30:19 +0000 (15:30 +0100)]
Revert "filamenttrestle wip use prong, before abandon prong"

This reverts commit 6a9d142873c332004002d3f92b36e846b99b4388.

7 years agofilamenttrestle wip use prong, before abandon prong
Ian Jackson [Sun, 7 Oct 2012 14:30:10 +0000 (15:30 +0100)]
filamenttrestle wip use prong, before abandon prong

7 years agofilamenttrestle wip not use doveclip
Ian Jackson [Sun, 7 Oct 2012 14:29:48 +0000 (15:29 +0100)]
filamenttrestle wip not use doveclip

7 years agofilamenttrestle wip before not use doveclip
Ian Jackson [Sat, 6 Oct 2012 15:19:08 +0000 (16:19 +0100)]
filamenttrestle wip before not use doveclip

7 years agofilamenttrestle wip
Ian Jackson [Sat, 6 Oct 2012 15:00:35 +0000 (16:00 +0100)]
filamenttrestle wip

7 years agopawn wip work around openscad issue https://github.com/openscad/openscad/issues/203
Ian Jackson [Wed, 3 Oct 2012 21:36:35 +0000 (22:36 +0100)]
pawn wip work around openscad issue https://github.com/openscad/openscad/issues/203

7 years agopawn wip bugfixes
Ian Jackson [Wed, 3 Oct 2012 17:32:19 +0000 (18:32 +0100)]
pawn wip bugfixes

7 years agopawn wip introduce d
Ian Jackson [Tue, 2 Oct 2012 17:26:54 +0000 (18:26 +0100)]
pawn wip introduce d

7 years agopawn wip tuning
Ian Jackson [Tue, 2 Oct 2012 17:24:18 +0000 (18:24 +0100)]
pawn wip tuning

7 years agopawn wip new template
Ian Jackson [Tue, 2 Oct 2012 17:24:08 +0000 (18:24 +0100)]
pawn wip new template

7 years agopawn wip tuning
Ian Jackson [Tue, 2 Oct 2012 17:10:02 +0000 (18:10 +0100)]
pawn wip tuning

7 years agopawn wip fix
Ian Jackson [Tue, 2 Oct 2012 17:06:17 +0000 (18:06 +0100)]
pawn wip fix

7 years agopawn wip remove old version
Ian Jackson [Tue, 2 Oct 2012 16:59:01 +0000 (17:59 +0100)]
pawn wip remove old version

7 years agopawn wip
Ian Jackson [Tue, 2 Oct 2012 16:58:46 +0000 (17:58 +0100)]
pawn wip

7 years agopawn wip
Ian Jackson [Tue, 2 Oct 2012 16:57:00 +0000 (17:57 +0100)]
pawn wip

7 years agopawn wip
Ian Jackson [Tue, 2 Oct 2012 16:48:12 +0000 (17:48 +0100)]
pawn wip

7 years agofilament-test 2
Ian Jackson [Sat, 29 Sep 2012 18:44:30 +0000 (19:44 +0100)]
filament-test 2

7 years agofilament-test
Ian Jackson [Sat, 29 Sep 2012 18:26:52 +0000 (19:26 +0100)]
filament-test

7 years agofirmware rebuilt and reflashed
Ian Jackson [Sun, 23 Sep 2012 13:52:11 +0000 (14:52 +0100)]
firmware rebuilt and reflashed

7 years agoMakefile fix dependency generation after .tmp change
Ian Jackson [Sat, 22 Sep 2012 17:29:35 +0000 (18:29 +0100)]
Makefile fix dependency generation after .tmp change

7 years agoslic3r-config use cooling it is good
Ian Jackson [Thu, 20 Sep 2012 19:16:30 +0000 (20:16 +0100)]
slic3r-config use cooling it is good

7 years agoMakefile openscad use .tmp.stl
Ian Jackson [Thu, 20 Sep 2012 09:45:49 +0000 (10:45 +0100)]
Makefile openscad use .tmp.stl

7 years agoMakefile use PRECIOUS
Ian Jackson [Thu, 20 Sep 2012 09:27:55 +0000 (10:27 +0100)]
Makefile use PRECIOUS

7 years agoMakefile work in own dir again
Ian Jackson [Thu, 20 Sep 2012 03:30:00 +0000 (04:30 +0100)]
Makefile work in own dir again

7 years agoMakefile support out of tree
Ian Jackson [Thu, 20 Sep 2012 03:27:41 +0000 (04:27 +0100)]
Makefile support out of tree