chiark / gitweb /
Ian Jackson [Sun, 1 Nov 2015 23:30:16 +0000 (23:30 +0000)]
led-panel-ceiling-bracket: needs to engage twice as much and nut is 2.7mm thick
Ian Jackson [Fri, 30 Oct 2015 17:34:30 +0000 (17:34 +0000)]
led-panel-ceiling-bracket: bolt hole depth change for 12mm long bolts?
Ian Jackson [Fri, 30 Oct 2015 17:34:13 +0000 (17:34 +0000)]
led-panel-ceiling-bracket: swap order to make % of cube show us bolt holes (nfc)
Ian Jackson [Thu, 29 Oct 2015 19:57:46 +0000 (19:57 +0000)]
led-panel-ceiling-bracket: stronger
Ian Jackson [Thu, 29 Oct 2015 19:55:02 +0000 (19:55 +0000)]
led-panel-ceiling-bracket: ready for test?
Ian Jackson [Thu, 29 Oct 2015 19:47:03 +0000 (19:47 +0000)]
led-panel-ceiling-bracket: wip
Ian Jackson [Thu, 29 Oct 2015 19:38:50 +0000 (19:38 +0000)]
led-panel-ceiling-bracket: wip
Ian Jackson [Sun, 25 Oct 2015 15:30:50 +0000 (15:30 +0000)]
warptest: shorter and taller
Ian Jackson [Sun, 25 Oct 2015 14:04:58 +0000 (14:04 +0000)]
warptest: longer and thinner and taller
Ian Jackson [Sat, 19 Sep 2015 17:04:35 +0000 (18:04 +0100)]
Makefile: fix warning
/home/reprap/play/Makefile:84: *** mixed implicit and normal rules: deprecated syntax
/home/reprap/play/Makefile:95: *** mixed implicit and normal rules: deprecated syntax
Ian Jackson [Sat, 5 Sep 2015 13:58:37 +0000 (14:58 +0100)]
fire-blanket-wall-mushroom: suggestions after print if we want to print a new one
Ian Jackson [Sat, 5 Sep 2015 13:44:26 +0000 (14:44 +0100)]
fire-blanket-wall-mushroom: adjust fudge
Ian Jackson [Sat, 5 Sep 2015 13:44:17 +0000 (14:44 +0100)]
fire-blanket-wall-mushroom: first layer finer
Ian Jackson [Sat, 5 Sep 2015 13:43:49 +0000 (14:43 +0100)]
fire-blanket-wall-mushroom: fix orentation etc.
Ian Jackson [Sat, 5 Sep 2015 13:43:04 +0000 (14:43 +0100)]
pronsolerc: Update build area (new pronterface)
Ian Jackson [Sat, 5 Sep 2015 13:33:03 +0000 (14:33 +0100)]
fire-blanket-wall-mushroom: bush
Ian Jackson [Sat, 5 Sep 2015 13:31:32 +0000 (14:31 +0100)]
fire-blanket-wall-mushroom: remove debug
Ian Jackson [Sat, 5 Sep 2015 13:31:22 +0000 (14:31 +0100)]
fire-blanket-wall-mushroom: no csink
Ian Jackson [Sat, 5 Sep 2015 13:30:52 +0000 (14:30 +0100)]
fire-blanket-wall-mushroom: before no csink
Ian Jackson [Mon, 31 Aug 2015 22:13:46 +0000 (23:13 +0100)]
pull-cord-keeper: Kit
Ian Jackson [Mon, 31 Aug 2015 22:08:56 +0000 (23:08 +0100)]
pull-cord-keeper: hull the RoundEdges
Ian Jackson [Mon, 31 Aug 2015 22:07:51 +0000 (23:07 +0100)]
pull-cord-keeper: Add RoundEdges
Ian Jackson [Mon, 31 Aug 2015 22:07:29 +0000 (23:07 +0100)]
pull-cord-keeper: Break out VExtrude and OuterOval
Ian Jackson [Sun, 9 Aug 2015 12:07:56 +0000 (13:07 +0100)]
brompton-computer-guard: Provide web on inside
Ian Jackson [Sun, 9 Aug 2015 07:57:43 +0000 (08:57 +0100)]
brompton-computer-guard: commute difference() linear_extrude(), making MainCutout flat (nfc)
Ian Jackson [Sun, 9 Aug 2015 07:54:59 +0000 (08:54 +0100)]
brompton-computer-guard: distribute difference() with MainCutout (nfc)
Ian Jackson [Sun, 9 Aug 2015 07:54:06 +0000 (08:54 +0100)]
brompton-computer-guard: break out MainCutout (nfc)
Ian Jackson [Sat, 1 Aug 2015 22:59:44 +0000 (23:59 +0100)]
pull-cord-keeper: screw hole
Ian Jackson [Sat, 1 Aug 2015 22:57:07 +0000 (23:57 +0100)]
pull-cord-keeper: before screw hole
Ian Jackson [Sat, 1 Aug 2015 22:55:18 +0000 (23:55 +0100)]
pull-cord-keeper: fix some gaps
Ian Jackson [Sat, 1 Aug 2015 22:52:41 +0000 (23:52 +0100)]
pull-cord-keeper: backxgap
Ian Jackson [Sat, 1 Aug 2015 22:50:59 +0000 (23:50 +0100)]
pull-cord-keeper: fiddlings
Ian Jackson [Sat, 1 Aug 2015 22:47:25 +0000 (23:47 +0100)]
pull-cord-keeper: cutmore
Ian Jackson [Sat, 1 Aug 2015 22:42:33 +0000 (23:42 +0100)]
pull-cord-keeper: not polygon remain cut
Ian Jackson [Sat, 1 Aug 2015 22:40:16 +0000 (23:40 +0100)]
pull-cord-keeper: before polygon remain cut
Ian Jackson [Sat, 1 Aug 2015 22:30:02 +0000 (23:30 +0100)]
pull-cord-keeper: wip
Ian Jackson [Sat, 1 Aug 2015 22:23:06 +0000 (23:23 +0100)]
pull-cord-keeper: wip
Ian Jackson [Sat, 1 Aug 2015 22:14:28 +0000 (23:14 +0100)]
pull-cord-keeper: wip
Ian Jackson [Sat, 1 Aug 2015 16:39:14 +0000 (17:39 +0100)]
pull-cord-keeper: wip, before cut up
Ian Jackson [Sat, 1 Aug 2015 16:36:25 +0000 (17:36 +0100)]
pull-cord-keeper: wip, before reorg for ovals
Ian Jackson [Sun, 5 Jul 2015 12:51:48 +0000 (13:51 +0100)]
pandemic-quarantines: first try
Ian Jackson [Sun, 5 Jul 2015 12:39:52 +0000 (13:39 +0100)]
pandemic-quarantines: xfig layers are numbers, wip
Ian Jackson [Sun, 5 Jul 2015 12:33:32 +0000 (13:33 +0100)]
pandemic-quarantines: numbers, dxfs
Ian Jackson [Sun, 5 Jul 2015 12:23:24 +0000 (13:23 +0100)]
pandemic-quarantines: wip
Ian Jackson [Sat, 28 Feb 2015 13:56:29 +0000 (13:56 +0000)]
screw-recess-test: full test
Ian Jackson [Sat, 28 Feb 2015 13:40:42 +0000 (13:40 +0000)]
screw-recess-test: lettering test
Ian Jackson [Sat, 28 Feb 2015 13:40:06 +0000 (13:40 +0000)]
screw-recess-test: numbers
Ian Jackson [Sat, 28 Feb 2015 13:03:36 +0000 (13:03 +0000)]
screw-recess-test: number varies
Ian Jackson [Sat, 28 Feb 2015 13:00:58 +0000 (13:00 +0000)]
screw-recess-test-number.fig: make into perl script
Ian Jackson [Sat, 28 Feb 2015 13:00:02 +0000 (13:00 +0000)]
screw-recess-test-number: wip
Ian Jackson [Sat, 28 Feb 2015 12:51:56 +0000 (12:51 +0000)]
screw-recess-test: tweaks
Ian Jackson [Thu, 12 Feb 2015 00:20:44 +0000 (00:20 +0000)]
screw-recess-test: put finite (3mm) shaft hole back (bugfix)
Ian Jackson [Thu, 12 Feb 2015 00:12:52 +0000 (00:12 +0000)]
screw-recess-test: Allen tests too
Ian Jackson [Thu, 12 Feb 2015 00:11:19 +0000 (00:11 +0000)]
screw-recess-test: Make tests line up with ymul
Ian Jackson [Thu, 12 Feb 2015 00:08:48 +0000 (00:08 +0000)]
screw-recess-test: break out OneTestCore (nfc)
Ian Jackson [Thu, 12 Feb 2015 00:07:24 +0000 (00:07 +0000)]
screw-recess-test: standard screws
Ian Jackson [Wed, 11 Feb 2015 23:43:15 +0000 (23:43 +0000)]
screw-recess-test: actual results
Ian Jackson [Wed, 11 Feb 2015 23:38:43 +0000 (23:38 +0000)]
screw-recess-test: abolish spurious column in tests array
Ian Jackson [Wed, 11 Feb 2015 22:51:05 +0000 (22:51 +0000)]
screw-recess-test: recursion for test location
Ian Jackson [Wed, 11 Feb 2015 22:33:25 +0000 (22:33 +0000)]
screw-recess-test: measurements from real screws
Ian Jackson [Wed, 11 Feb 2015 22:25:33 +0000 (22:25 +0000)]
screw-recess-test: new tests
Ian Jackson [Wed, 11 Feb 2015 22:16:23 +0000 (22:16 +0000)]
screw-recess-test: mid of new tests
Ian Jackson [Wed, 11 Feb 2015 21:36:07 +0000 (21:36 +0000)]
screw-recess-test: abolish blockxy (nfc)
Ian Jackson [Wed, 11 Feb 2015 21:33:28 +0000 (21:33 +0000)]
screw-recess-test: break out RecessedScrewCutout_totaldepth (nfc)
Ian Jackson [Wed, 11 Feb 2015 21:31:24 +0000 (21:31 +0000)]
screw-recess-test: break out RecessedScrewCutout_recessdepth (nfc)
Ian Jackson [Wed, 11 Feb 2015 21:30:02 +0000 (21:30 +0000)]
screw-recess-test: make zbelow parameter come before recessdepth_arg (nfc)
Ian Jackson [Wed, 11 Feb 2015 21:29:45 +0000 (21:29 +0000)]
screw-recess-test: make shaftlen a parameter (nfc)
Ian Jackson [Wed, 11 Feb 2015 21:28:29 +0000 (21:28 +0000)]
screw-recess-test: make zbelow configurable (nfc)
Ian Jackson [Wed, 11 Feb 2015 21:25:46 +0000 (21:25 +0000)]
screw-recess-test: provide recessdepth_arg processing
Ian Jackson [Wed, 11 Feb 2015 21:18:25 +0000 (21:18 +0000)]
screw-recess-test: Break out RecessedScrewCutout (wip generalisation) (nfc)
Ian Jackson [Wed, 11 Feb 2015 18:30:51 +0000 (18:30 +0000)]
screw-recess-test: initial
Ian Jackson [Sun, 11 Jan 2015 02:13:33 +0000 (02:13 +0000)]
pandemic-counter: change layout of S
Ian Jackson [Sun, 11 Jan 2015 01:55:08 +0000 (01:55 +0000)]
pandemic-counter: adjust L
Ian Jackson [Sat, 10 Jan 2015 22:48:44 +0000 (22:48 +0000)]
Makefile: add more to .PRECIOUS to defeat daft make
Ian Jackson [Sat, 10 Jan 2015 22:42:02 +0000 (22:42 +0000)]
pandemic-counter: fix dependency
Ian Jackson [Sat, 10 Jan 2015 22:40:56 +0000 (22:40 +0000)]
pandemic-counter: slightly thicker, more fill - improve quality
Ian Jackson [Sat, 10 Jan 2015 22:38:36 +0000 (22:38 +0000)]
Makefile: load base .slic3r file too
Ian Jackson [Sat, 10 Jan 2015 21:45:17 +0000 (21:45 +0000)]
pandemic-counter: adjust pos of A
Ian Jackson [Sat, 10 Jan 2015 21:43:20 +0000 (21:43 +0000)]
pandemic-counter: flip so that base when printed (good side) is top side
Ian Jackson [Sat, 10 Jan 2015 21:12:06 +0000 (21:12 +0000)]
pandemic-counter: fix toplevels, fix no terrorist
Ian Jackson [Sat, 10 Jan 2015 21:08:37 +0000 (21:08 +0000)]
pandemic-counter: no terrorist - leaks, need to use logbook instead
Ian Jackson [Sat, 10 Jan 2015 21:07:59 +0000 (21:07 +0000)]
Makefile: make .eps and .dxf precious
Ian Jackson [Sat, 10 Jan 2015 21:06:33 +0000 (21:06 +0000)]
pandemic-counter: Makefiles etc.
Ian Jackson [Sat, 10 Jan 2015 20:56:08 +0000 (20:56 +0000)]
pandemic-counter: colour suggestions from ceb
Ian Jackson [Sat, 10 Jan 2015 20:45:20 +0000 (20:45 +0000)]
pandemic-counter: wip
Ian Jackson [Tue, 6 Jan 2015 01:11:00 +0000 (01:11 +0000)]
knifeblock: Bigger test block
Ian Jackson [Tue, 6 Jan 2015 01:05:02 +0000 (01:05 +0000)]
knifeblock: Adjust indents
Ian Jackson [Sat, 3 Jan 2015 21:44:33 +0000 (21:44 +0000)]
knifeblock: Bigger indents
Ian Jackson [Fri, 2 Jan 2015 00:52:27 +0000 (00:52 +0000)]
knifeblock: Print main block with 10% fill not 20% - reduces feedstock required from 40m to 27m
Ian Jackson [Fri, 2 Jan 2015 00:40:58 +0000 (00:40 +0000)]
knifeblock: add BlockFrontTest
Ian Jackson [Fri, 2 Jan 2015 00:33:08 +0000 (00:33 +0000)]
knifeblock: Indents adj size
Ian Jackson [Fri, 2 Jan 2015 00:36:32 +0000 (00:36 +0000)]
knifeblock: Add FrontDemo
Ian Jackson [Fri, 2 Jan 2015 00:33:45 +0000 (00:33 +0000)]
knifeblock: Have HexGrid calculate jmin et al from coordinates (no ultimate resulting change to model, although numbers of generated grid objects are different)
Ian Jackson [Fri, 2 Jan 2015 00:12:02 +0000 (00:12 +0000)]
knifeblock: Decorative indents
Ian Jackson [Thu, 1 Jan 2015 23:54:22 +0000 (23:54 +0000)]
knifeblock: Holes refactor: move holeoffx/y into HexGrid (nfc)
Ian Jackson [Thu, 1 Jan 2015 23:53:19 +0000 (23:53 +0000)]
knifeblock: Holes refactor: break out HexGrid (nfc)
Ian Jackson [Thu, 1 Jan 2015 23:46:25 +0000 (23:46 +0000)]
knifeblock: Holes refactor: fold in HoleRow (nfc)
Ian Jackson [Thu, 1 Jan 2015 23:45:15 +0000 (23:45 +0000)]
knifeblock: Holes refactor: rename i to j in Holes (nfc)
Ian Jackson [Thu, 1 Jan 2015 23:38:20 +0000 (23:38 +0000)]
knifeblock: Peg slot in block fix
Ian Jackson [Thu, 1 Jan 2015 19:38:37 +0000 (19:38 +0000)]
knifeblock: add Pegs toplevel
~ianmdlvl / reprap-play.git / log