From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Sat, 24 Nov 2012 22:12:46 +0000 (+0000)
Subject: slic3r-config, etc.: increase temperatures, restore extrusion multiplier, suitable... 
X-Git-Tag: filamentspool-v2-release~670^2~1
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=commitdiff_plain;h=c27d38880a48a54666ecacfba455f0b7080d4b55

slic3r-config, etc.: increase temperatures, restore extrusion multiplier, suitable for flattish things with poor adhesion
---

diff --git a/pronsolerc b/pronsolerc
index 9182137..ab53a11 100644
--- a/pronsolerc
+++ b/pronsolerc
@@ -11,7 +11,7 @@ button 9 "BR" G1 X15 Y15 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000
-set last_bed_temperature 80.0
+set last_bed_temperature 90.0
 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000
diff --git a/slic3r-config.ini b/slic3r-config.ini
index 794667c..03cb4bd 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.1 on Sun Oct 14 23:13:04 2012
+# generated by Slic3r 0.9.1 on Sat Nov 24 21:15:49 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 90
+bed_temperature = 100
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -19,7 +19,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 0.9
+extrusion_multiplier = 1.0
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 80
+first_layer_bed_temperature = 90
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%