From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Fri, 18 Dec 2015 01:25:29 +0000 (+0000)
Subject: slic3r-config, pronsolerc: Adjust temperatures for new polyethemiride reprap base
X-Git-Tag: filamentspool-v2-release~60
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=commitdiff_plain;h=a2d9c780a8b16bf2b5f8d348103d482fb8e20cc1

slic3r-config, pronsolerc: Adjust temperatures for new polyethemiride reprap base
---

diff --git a/pronsolerc b/pronsolerc
index 34e6c69..3073286 100644
--- a/pronsolerc
+++ b/pronsolerc
@@ -1,5 +1,5 @@
 set port /dev/ttyUSB0
-set last_temperature 215.0
+set last_temperature 205.0
 
 macro button_retract
       M83
@@ -21,7 +21,7 @@ button 9 "BR" G1 X15 Y15 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000
-set last_bed_temperature 100.0
+set last_bed_temperature 60.0
 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000
diff --git a/slic3r-config.ini b/slic3r-config.ini
index 971c592..c496b91 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.7 on Tue May 27 22:23:38 2014
+# generated by Slic3r 0.9.7 on Fri Dec 18 00:34:03 2015
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 100
+bed_temperature = 60
 bottom_solid_layers = 2
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
@@ -28,11 +28,11 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 100
+first_layer_bed_temperature = 60
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 215
+first_layer_temperature = 205
 g0 = 0
 gap_fill_speed = 20
 gcode_arcs = 0