From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Mon, 2 Jan 2017 14:11:34 +0000 (+0000)
Subject: sewing-table: rename InterlockLobe* (from Interlock) (nfc)
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=commitdiff_plain;h=4982e66d15e9dcc3aec326dfe480cdec31aaaf91

sewing-table: rename InterlockLobe* (from Interlock) (nfc)
---

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index 25bca6c..40ec1be 100644
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -121,7 +121,7 @@ module RoundLeftCorner(this_cnr, right_cnr) {
   }
 }
 
-module InterlockPlan(r, ymir) {
+module InterlockLobePlan(r, ymir) {
   dx = sqrt(3) * r;
   $fn= 80;
   translate([thehd[0], 0]){
@@ -139,19 +139,19 @@ module InterlockPlan(r, ymir) {
   }
 }
 
-module InterlockCore(r, plusth, ymir) {
+module InterlockLobeCore(r, plusth, ymir) {
   translate([0, 0, plusth]){
     mirror([0,0,1]){
       linear_extrude(height=tile_th+plusth*2, convexity=10){
-	InterlockPlan(r, ymir);
+	InterlockLobePlan(r, ymir);
       }
     }
   }
 }
 
-module Interlock(this_cnr, right_cnr, negative=0) {
+module InterlockLobe(this_cnr, right_cnr, negative=0) {
   INREFFRAME(this_cnr, right_cnr)
-    InterlockCore(negative ? interlock_negative_rad : interlock_rad,
+    InterlockLobeCore(negative ? interlock_negative_rad : interlock_rad,
 		  negative ? 1 : 0,
 		  negative ? 0 : 1);
 }
@@ -169,7 +169,7 @@ module TestPiece1(){ ////toplevel
   corners = TestPiece_holes2corners(holes);
   difference(){
     TileBase(corners[0], corners[2]);
-    Interlock(corners[1], corners[2], 1);
+    InterlockLobe(corners[1], corners[2], 1);
   }
   Posts(holes);
   RoundEdge(corners[0], corners[1]);
@@ -185,7 +185,7 @@ module TestPiece2(){ ////toplevel
   TileBase(corners[0], corners[2]);
   Posts(holes);
   RoundEdge(corners[0], corners[1]);
-  Interlock(corners[3], corners[0]);
+  InterlockLobe(corners[3], corners[0]);
 }
 
 module Demo(){ ////toplevel