From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Tue, 16 Feb 2016 00:01:25 +0000 (+0000)
Subject: bike-lipo-box: adjustments from #1330 (and notes): prep for vent: add hole for vent
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=commitdiff_plain;h=39cbf5629d28b6cb5ff03c9de42d380c92cccfb7

bike-lipo-box: adjustments from #1330 (and notes): prep for vent: add hole for vent
---

diff --git a/bike-lipo-box.scad b/bike-lipo-box.scad
index 71962b5..edd3701 100644
--- a/bike-lipo-box.scad
+++ b/bike-lipo-box.scad
@@ -17,6 +17,9 @@ s1930_recess = 3;
 s1930_around = 3;
 s1930_behind = 3;
 
+jdae12pa_rad = 12 / 2 + 0.5;
+jdae12pa_rad_outer = 19 / 2 + 0.5; // head of an "M12 bolt"
+
 totx_inner = 180;
 toty_outer = 95;
 totz_inner = 27.0;
@@ -227,6 +230,13 @@ module Box(){ ////toplevel
 	       10])
       cylinder(r= pxp6012_rad, h= totz_outer);
 
+    // vent connector
+    translate([chargingconn_x,
+	       toty_inner - (pxp6012_rad_outer*2 + 5 + 15 +
+			     jdae12pa_rad_outer),
+	       10])
+      cylinder(r= jdae12pa_rad, h= totz_outer);
+
     translate([switch_x, toty_inner, totz_inner/2])
       rotate([90,0,90])
       S1930_Negative();