From: Ian Jackson <ijackson@chiark.greenend.org.uk>
Date: Wed, 17 Oct 2012 23:54:10 +0000 (+0100)
Subject: filamenttrestle wip HubEnd
X-Git-Tag: filamentspool-v2-release~719
X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=commitdiff_plain;h=15499cb86f55d2c2b7564a7bbba1c89e54aaac7b

filamenttrestle wip HubEnd
---

diff --git a/filamenttrestle.scad b/filamenttrestle.scad
index df3b53a..dd0b01c 100644
--- a/filamenttrestle.scad
+++ b/filamenttrestle.scad
@@ -8,13 +8,21 @@ include <doveclip.scad>
 include <axlepin.scad>
 
 spoolradclear = 10;
+spoolradslop = 2;
 
 spoolinnerslop = 2;
+axleslop = 0.5;
 
-barrad = 7;
+axlerad = 7;
 barwasherrad = 17;
 
-hubbasethick = 4;
+hubbasethick = 6;
+hubmainthick = 20;
+hubbaseweb = 2;
+hubbasestalkwidth = 6;
+hubwalls = 3;
+hubbaserad = spoolinnerrad + 15;
+hubmainrad = spoolinnerrad - spoolradslop;
 
 legw = 12;
 plugl = 20;
@@ -43,7 +51,7 @@ spoolouterpad = AxlePin_holerad()*2 * 1.5;
 spoolbarlen = spoolwidth +
   2*(Washer_thick() + hubbasethick + AxlePin_holerad()
      + spoolinnerslop + spoolouterpad);
-  barz = barrad * 0.5;
+  barz = axlerad * 0.5;
 axlepin_x = spoolwidth/2 + hubbasethick +
   Washer_thick() + spoolinnerslop + AxlePin_holerad()*0.5;
 
@@ -91,17 +99,17 @@ module Bar(){ ////toplevel
     }
     translate([0,0,barz]) {
       translate([-100,0,0])
-	rotate([0,90,0]) cylinder(r=barrad, h=200, $fn=30);
+	rotate([0,90,0]) cylinder(r=axlerad, h=200, $fn=30);
     }
   }
 }
 
 module FtAxlePin(){ ////toplevel
-  AxlePin(barrad, (barrad + barwasherrad*2)/3 * 2);
+  AxlePin(axlerad, (axlerad + barwasherrad*2)/3 * 2);
 }
 
 module AxleWasher(){ ////toplevel
-  Washer(barrad, barwasherrad);
+  Washer(axlerad, barwasherrad);
 }
 
 module Trestle(){ ////toplevel
@@ -185,6 +193,36 @@ module Pin(){ ////toplevel
   }
 }
 
+module HubEnd(){ ////toplevel
+  thick = hubmainthick+hubbasethick;
+  difference(){
+    union(){
+      for (ang=[0 : 60 : 359]) {
+	rotate([0,0,ang]) {
+	  translate([hubmainrad - hubwalls/2, -hubbasestalkwidth/2, 0])
+	    cube([hubbaserad - (hubmainrad - hubwalls/2),
+		  hubbasestalkwidth, hubbasethick]);
+	}
+      }
+      cylinder(r=axlerad+hubwalls, h=thick);
+      cylinder(r=hubmainrad-0.1, h=hubwebthick);
+      difference(){
+	cylinder(r=hubmainrad, h=thick, $fn=100);
+	translate([0,0,-1])
+	  cylinder(r=hubmainrad-hubwalls, h=thick+2);
+      }
+      difference(){
+	cylinder(r=hubbaserad, h=hubbasethick, $fn=50);
+	translate([0,0,-1])
+	  cylinder(r=hubbaserad-hubwalls, h=hubbasethick+2);
+      }
+    }
+    translate([0,0,-1])
+      cylinder(r=axlerad+axleslop, h=thick+2, $fn=50);
+  }
+}
+
+
 module TestKit(){ ////toplevel
   translate([30,0,0]) Pin();
   translate([30,30,0]) Pin();
@@ -227,4 +265,5 @@ module Demo(){
 //TestKit();
 //Plug(d=1);
 //ExtenderPillars(80,12,8, baseweb=true);
-Demo();
+HubEnd();
+//Demo();