X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=slic3r-config.ini;h=c496b9171221ca15c619cb443e7c7a2ac7db9df8;hp=b9906b865b216a2077672f3900f2d2d919a6a1ce;hb=1f1a48c7ecc8938a779353150fa6a68b5da0c8ee;hpb=6f2050515372cea549e0a9f15e7078312774feb4

diff --git a/slic3r-config.ini b/slic3r-config.ini
index b9906b8..c496b91 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,13 +1,14 @@
-# generated by Slic3r 0.9.1 on Mon Aug 13 23:57:00 2012
+# generated by Slic3r 0.9.7 on Fri Dec 18 00:34:03 2015
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 80
+bed_temperature = 60
+bottom_solid_layers = 2
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 brim_width = 0
 complete_objects = 0
-cooling = 0
+cooling = 1
 disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
@@ -19,20 +20,21 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1
+extrusion_multiplier = 1.0
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.77
 fill_angle = 45
-fill_density = 0.4
+fill_density = 0.2
 fill_pattern = rectilinear
 first_layer_bed_temperature = 60
-first_layer_extrusion_width = 150%
+first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 215
+first_layer_temperature = 205
 g0 = 0
+gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 0
 gcode_flavor = reprap
@@ -46,32 +48,37 @@ layer_height = 0.4
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
+min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50
+only_retract_when_crossing_perimeters = 1
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
 perimeter_extrusion_width = 100%
 perimeter_speed = 30
-perimeters = 1
+perimeters = 2
 post_process = 
 print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5
+retract_length_toolchange = 3
 retract_lift = 0.1
 retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
 retract_speed = 30
 rotate = 0
 scale = 1
-skirt_distance = 12
+skirt_distance = 3
 skirt_height = 1
 skirts = 2
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
+solid_infill_below_area = 1
+solid_infill_every_layers = 0
 solid_infill_speed = 60
-solid_layers = 3
 start_gcode = G28 ; home all axes
 support_material = 0
 support_material_angle = 0
@@ -79,10 +86,13 @@ support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
+support_material_speed = 60
 support_material_threshold = 45
-temperature = 210
+temperature = 205
 threads = 8
 top_solid_infill_speed = 50
+top_solid_layers = 2
 travel_speed = 130
 use_relative_e_distances = 0
+vibration_limit = 0
 z_offset = 0