X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=slic3r-config.ini;h=c496b9171221ca15c619cb443e7c7a2ac7db9df8;hp=2c38ddda2a34870a83de2fd830f1f2d42bc1af69;hb=b0ff0b516641f6de90ffc4710d40bed2ae727aab;hpb=f5567bd696d98d85401de1c57140d518fe40767c

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 2c38ddd..c496b91 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.7 on Sun May  4 00:21:18 2014
+# generated by Slic3r 0.9.7 on Fri Dec 18 00:34:03 2015
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 100
+bed_temperature = 60
 bottom_solid_layers = 2
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
@@ -25,14 +25,14 @@ extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.77
-fill_angle = 0
+fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 100
+first_layer_bed_temperature = 60
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 215
+first_layer_temperature = 205
 g0 = 0
 gap_fill_speed = 20
 gcode_arcs = 0
@@ -76,7 +76,7 @@ skirts = 2
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
+solid_infill_below_area = 1
 solid_infill_every_layers = 0
 solid_infill_speed = 60
 start_gcode = G28 ; home all axes