X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=slic3r-config.ini;h=bcb830e5488d5892ab813ca5965711e348b42282;hp=3b920879130ec8c9e62b2cb66ec94eec8eb89c9c;hb=2ca6a848d145b00e7e1e1d19d7a94cc8d0ea79c3;hpb=6820de28cb1330e61f5da979e3fcbdc06ea6a86d

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 3b92087..bcb830e 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,8 +1,8 @@
-# generated by Slic3r 0.9.7 on Sun Dec 16 20:42:19 2012
+# generated by Slic3r 0.9.1 on Thu Feb 14 20:07:32 2013
+ = 
 acceleration = 0
-bed_size = 140,140
-bed_temperature = 100
-bottom_solid_layers = 3
+bed_size = 140,150
+bed_temperature = 90
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -28,13 +28,12 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 90
+first_layer_bed_temperature = 80
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_temperature = 215
 g0 = 0
-gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 0
 gcode_flavor = reprap
@@ -48,10 +47,8 @@ layer_height = 0.4
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
-min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50
-only_retract_when_crossing_perimeters = 0
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
@@ -63,10 +60,8 @@ print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5
-retract_length_toolchange = 3
 retract_lift = 0.1
 retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
 retract_speed = 30
 rotate = 0
 scale = 1
@@ -76,9 +71,8 @@ skirts = 2
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
 solid_infill_speed = 60
+solid_layers = 3
 start_gcode = G28 ; home all axes
 support_material = 0
 support_material_angle = 0
@@ -86,13 +80,10 @@ support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
-support_material_speed = 60
 support_material_threshold = 45
 temperature = 205
 threads = 8
 top_solid_infill_speed = 50
-top_solid_layers = 3
 travel_speed = 130
 use_relative_e_distances = 0
-vibration_limit = 0
 z_offset = 0