X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=slic3r-config.ini;h=b45661c03fadfc9f503786364c8fcd2c97fd9e59;hp=26a96700870ba5b10bf15a22ec2328661c548df8;hb=dd187b637ee181910c3584b01c1703d13eff73d4;hpb=c7f7be3ce58c32d9eb1b920677c7fec61525f3a7

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 26a9670..b45661c 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 0.9.1 on Fri Aug 10 20:20:22 2012
+# generated by Slic3r 0.9.1 on Sat Aug 11 00:02:11 2012
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 60
@@ -28,10 +28,10 @@ fill_angle = 45
 fill_density = 0.4
 fill_pattern = rectilinear
 first_layer_bed_temperature = 65
-first_layer_extrusion_width = 200%
-first_layer_height = 0.5
+first_layer_extrusion_width = 150%
+first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 195
+first_layer_temperature = 215
 g0 = 0
 gcode_arcs = 0
 gcode_comments = 0
@@ -47,11 +47,11 @@ max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 notes = 
-nozzle_diameter = 0.5
+nozzle_diameter = 0.59
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
-perimeter_extrusion_width = 0
+perimeter_extrusion_width = 100%
 perimeter_speed = 30
 perimeters = 3
 post_process = 
@@ -60,7 +60,7 @@ randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5
 retract_lift = 0.1
-retract_restart_extra = 0.1
+retract_restart_extra = 0
 retract_speed = 30
 rotate = 0
 scale = 1
@@ -80,9 +80,9 @@ support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-temperature = 190
+temperature = 210
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130
 use_relative_e_distances = 0
-z_offset = 0.0
+z_offset = 0