X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=slic3r-config.ini;h=794667c164cacab7514a512df38344836b649421;hp=0e430c29bd43daebda2ec8440697327c3ba5584e;hb=200fce22c4d13f7a9eddaf41383ed26ff082d44f;hpb=df0cc40a8d075622641aaae34a2206c70931899c

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 0e430c2..794667c 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,13 +1,13 @@
-# generated by Slic3r 0.9.1 on Tue Aug 14 01:47:51 2012
+# generated by Slic3r 0.9.1 on Sun Oct 14 23:13:04 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 80
+bed_temperature = 90
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 brim_width = 0
 complete_objects = 0
-cooling = 0
+cooling = 1
 disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
@@ -19,7 +19,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1
+extrusion_multiplier = 0.9
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 70
+first_layer_bed_temperature = 80
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
@@ -80,7 +80,7 @@ support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-temperature = 210
+temperature = 215
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130