X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=slic3r-config.ini;h=6ef4ed606914d4ce50a2b347fec4c5c9874105f4;hp=f77a8f13dd7af8f072bc6a920230c1b7f4fe568b;hb=871c8f758bcec2b55eb4e4d0748f3ce74b2064f1;hpb=cc86ca9bde73d96a3bf00bb65d0d0d776f9495be

diff --git a/slic3r-config.ini b/slic3r-config.ini
index f77a8f1..6ef4ed6 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,6 +1,7 @@
+# generated by Slic3r 0.9.1 on Sun Sep 16 02:03:29 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 85
+bed_temperature = 80
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -11,30 +12,33 @@ disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
-end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
+end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 X0 Y0 F10000\nG28 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
+external_perimeter_speed = 100%
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
+extruder_offset = 0x0
 extrusion_axis = E
 extrusion_multiplier = 1
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
-filament_diameter = 1.8
+filament_diameter = 1.77
 fill_angle = 45
-fill_density = 0.4
+fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 85
-first_layer_extrusion_width = 0
-first_layer_height = 100%
+first_layer_bed_temperature = 70
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 230
+first_layer_temperature = 215
 g0 = 0
 gcode_arcs = 0
 gcode_comments = 0
 gcode_flavor = reprap
 infill_acceleration = 50
 infill_every_layers = 1
+infill_extruder = 1
 infill_extrusion_width = 0
 infill_speed = 60
 layer_gcode = 
@@ -43,26 +47,27 @@ max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 notes = 
-nozzle_diameter = 0.5
+nozzle_diameter = 0.50
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
+perimeter_extruder = 1
+perimeter_extrusion_width = 100%
 perimeter_speed = 30
-perimeters = 3
-perimeters_extrusion_width = 0
+perimeters = 1
 post_process = 
 print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5
-retract_lift = 0
-retract_restart_extra = 0.1
+retract_lift = 0.1
+retract_restart_extra = 0
 retract_speed = 30
 rotate = 0
 scale = 1
-skirt_distance = 6
+skirt_distance = 3
 skirt_height = 1
-skirts = 1
-slowdown_below_layer_time = 15
+skirts = 2
+slowdown_below_layer_time = 30
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
 solid_infill_speed = 60
@@ -70,13 +75,14 @@ solid_layers = 3
 start_gcode = G28 ; home all axes
 support_material = 0
 support_material_angle = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-support_material_tool = 0
-temperature = 230
-threads = 2
+temperature = 210
+threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130
 use_relative_e_distances = 0
-z_offset = -0.5
+z_offset = 0