X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=slic3r-config.ini;h=6ef4ed606914d4ce50a2b347fec4c5c9874105f4;hp=b45661c03fadfc9f503786364c8fcd2c97fd9e59;hb=6fb7b061e2548d03b47224294d79f85fc3cfba66;hpb=1d5873267b2e760a24365fbd5516fb74ab900930

diff --git a/slic3r-config.ini b/slic3r-config.ini
index b45661c..6ef4ed6 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.1 on Sat Aug 11 00:02:11 2012
+# generated by Slic3r 0.9.1 on Sun Sep 16 02:03:29 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 60
+bed_temperature = 80
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -12,7 +12,7 @@ disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
-end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
+end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 X0 Y0 F10000\nG28 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
 external_perimeter_speed = 100%
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -25,10 +25,10 @@ fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.77
 fill_angle = 45
-fill_density = 0.4
+fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 65
-first_layer_extrusion_width = 150%
+first_layer_bed_temperature = 70
+first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_temperature = 215
@@ -47,13 +47,13 @@ max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 notes = 
-nozzle_diameter = 0.59
+nozzle_diameter = 0.50
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
 perimeter_extrusion_width = 100%
 perimeter_speed = 30
-perimeters = 3
+perimeters = 1
 post_process = 
 print_center = 70,70
 randomize_start = 1
@@ -64,10 +64,10 @@ retract_restart_extra = 0
 retract_speed = 30
 rotate = 0
 scale = 1
-skirt_distance = 12
+skirt_distance = 3
 skirt_height = 1
 skirts = 2
-slowdown_below_layer_time = 15
+slowdown_below_layer_time = 30
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
 solid_infill_speed = 60