X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=size-tests.m-g;h=fbb666b9560dd262dd334399c05d2a39c9517975;hp=72c196bf74d7502968ba5ba759e2abf18fa7349a;hb=0c52fcdabe7e3b4a221edf19b5fabf91bbebe36a;hpb=62c270d3ff0d3dc6e691a8167e1b735e6fe0f922

diff --git a/size-tests.m-g b/size-tests.m-g
index 72c196b..fbb666b 100644
--- a/size-tests.m-g
+++ b/size-tests.m-g
@@ -86,9 +86,7 @@ M82 ; use absolute distances for extrusion
 
 !}
 
-!layer(){
-
-;--------------------
+!squares_tests(){
 
 !orgy=40
 
@@ -135,7 +133,62 @@ M82 ; use absolute distances for extrusion
 !orgx=30
 !inner_longrect()
 
-!org_oblong()
+!}
+
+!feedrate_tests(){
+
+!orgx=20
+!extruderate=0.045
+!feedrate_test1()
+
+!orgx=30
+!extruderate=0.060
+!feedrate_test1()
+
+!orgx=40
+!extruderate=0.080
+!feedrate_test1()
+
+!orgx=50
+!extruderate=0.100
+!feedrate_test1()
+
+!orgx=60
+!extruderate=0.125
+!feedrate_test1()
+
+!orgx=70
+!extruderate=0.150
+!feedrate_test1()
+
+!orgx=80
+!extruderate=0.200
+!feedrate_test1()
+
+!}
+
+!feedrate_test1(){
+
+!orgy=20
+!outer_longrect()
+
+!orgy=50
+!inner_longrect()
+!outer_longrect()
+
+!orgy=80
+!outer_longrect()
+!inner_longrect()
+
+!}
+
+!layer(){
+
+;--------------------
+
+;!squares_tests()
+;!org_oblong()
+!feedrate_tests()
 
 !}
 
@@ -147,6 +200,9 @@ M140 S60 ; set bed temperature
 !zprint=0.7
 !layer()
 
+!zprint=1.1
+!layer()
+
 M83 ; extruder relative
 G1 F1000 ;1000mm/min extrusion
 G1 E-10; retract