X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=sewing-table.scad.m4;h=8364420c3aa167051eddace34466f421d9d7a763;hp=d82277798d6a74ea6b314a5c6d47e7c4876a37f5;hb=a3680df53da821defeca220d33263f54b99b5118;hpb=cdd0d29e21d9d94efd167172707138f93b2aaf01

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index d822777..8364420 100644
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -72,10 +72,10 @@ frontcurve_z_slop = 0.75;
 frontcurve_strt_len = 50;
 frontcurve_dualcurve_angle = 30;
 
-teststrapslots_at = [ [ 110, 70 ],
+teststrapslots_at = [ [ 110, 70 ], [ 110, -35 ],
 		      [ 180, 90 ],
-		      [ 110, -35 ],
 		      [ 190, -80 ], // do not change index of this one
+		      [   0, 70 ],  [  0, -35 ],
 		      ];
 
 teststrap = [ 3, 5 ];
@@ -104,7 +104,7 @@ thehd_tl = [ -thehd_tr[0], thehd_tr[1] ];
 thehd_bl = -thehd_tr;
 thehd_br = -thehd_tl;
 
-tablet_z_slop = rearcurve_z_slop;
+tablet_z_slop = 0.25;
 
 interlock_rad = interlock_dia/2;
 interlock_negative_rad = interlock_rad + 0.125;
@@ -529,7 +529,7 @@ module TestStrapSlots(){
     translate(concat(pos,[0]))
       for (mx = [0,1]) mirror([mx,0,0]) {
 	  translate([ pegwidth/2, -teststrap[1]/2, -20 ])
-	    #cube(concat(teststrap,[40]));
+	    cube(concat(teststrap,[40]));
 	}
   }
 }
@@ -846,18 +846,20 @@ module FitTest_FrontCurve(){ ////toplevel
       }
     }
     FitTest_PairLink(true);
+    TestStrapSlots();
   }
 }
 
 module FitTest_Entire(){ ////toplevel
-  p0 = [-40,-80];
-  szrear = [270,180];
-  szfront = [250,szrear[1]];
+  p0 = [-33,-80];
+  szrear = [263,180];
+  szfront = [243,szrear[1]];
   difference(){
     FitTest_general(p0, szrear, dobrace=true, bracexx=0);
     FitTest_PairLink(true);
     translate(concat(p0,[0]) + [szfront[0],-10,-40])
       cube([100, -p0[1], 80]);
+    TestStrapSlots();
   }
   intersection(){
     FitTest_RearCurve();
@@ -871,6 +873,17 @@ module FitTest_EntireDemo(){ ////toplevel
   //%Tile00();
 }
 
+module FitTest_EndEnd(){ ////toplevel
+  p0 = [-35,-35];
+  sz = [190,120];
+  sz2 = [140,110];
+  intersection(){
+    FitTest_general(p0, sz);
+    %translate(concat(p0,[-10]))
+      cube(concat(sz2,[20]));
+  }
+}
+
 module FitTest_PairDemo(){ ////toplevel
   sh=[-90,-15,0];
   translate(sh){