X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=sewing-table.scad.m4;h=012a46a54476bad82d670814fefb87ac9f16fb51;hp=ca36333d913a93360e039f93e15811f79d08580a;hb=032c9fe163865fd509a7e374f5f0857f65e3dc2d;hpb=72d898e4eb972630e530cd066cfcf4b1eec90137

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index ca36333..012a46a 100644
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -7,6 +7,8 @@ ply_th = 18;
 ply_hole_dia = 15;
 ply_edge_min = 10;
 
+ply_hole_dia_real = 12;
+
 tile_th = 3;
 post_dia = 8;
 
@@ -80,6 +82,8 @@ teststrapslots_at = [ [ 110, 70 ], [ 110, -35 ],
 teststrap = [ 3, 5 ];
 teststrap_peg = [7.5, 3.5];
 
+ply_edge_hole_dist_real = 14;
+
 // calculated
 
 TEST = false;
@@ -104,7 +108,7 @@ thehd_tl = [ -thehd_tr[0], thehd_tr[1] ];
 thehd_bl = -thehd_tr;
 thehd_br = -thehd_tl;
 
-tablet_z_slop = 0.25;
+tablet_z_slop = 1.00;
 
 interlock_rad = interlock_dia/2;
 interlock_negative_rad = interlock_rad + 0.125;
@@ -140,8 +144,16 @@ module Post(){
 }
 
 module PostHole(){
-  translate([0,0,-5])
-    cylinder(r= jig_posthole_rad, h=10);
+  if (JIG) {
+    translate([0,0,-5])
+      cylinder(r= post_dia/2 + jig_post_hole_slop, h=10);
+    translate([0,0, -jig_min_th])
+      cylinder(r= ply_hole_dia_real/2, h = 5);
+    for (rot=[0:90:270]) rotate(rot) {
+	translate([ ply_edge_hole_dist_real, 0, 0 ])
+	  cube([ jig_pencil_rad*2, jig_pencil_slotlen, 20 ], center=true);
+      }
+  }
 }
 
 module Posts(posts) {
@@ -180,12 +192,13 @@ module TileBase(botleft, topright){
       crossoff = tile_hard_edge_hole_dist + POST_TCROSSSZ/2;
       cidsz = [ thehd[0], size[1] - 2*crossoff ];
       cidszr = [ cidsz[0], min(cidsz[1], 50) ];
-      translate( concat(botleft + [0, crossoff] + (cidsz-cidszr)/2, [0]) )
-	Commitid_BestCount(cidszr);
+      if (TEST)
+	translate( concat(botleft + [0, crossoff] + (cidsz-cidszr)/2, [0]) )
+	  Commitid_BestCount(cidszr);
       difference(){
 	mirror([0,0,1]) {
 	  translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
-	    cube(concat(size - [test_edge,test_edge]*2, [tile_th]));
+	    cube(concat(size - [test_edge,test_edge]*2, [tile_th*2]));
 	  translate(concat(botleft_post, [-1]))
 	    cube(concat(topright_post-botleft_post, [tile_th+2]));
 	}
@@ -802,6 +815,7 @@ module Tile00(){ ////toplevel
   rcy = cty + frontcurve_avoid_y;
   posts = [ cnr_posts[0],
 	    cnr_posts[1],
+	    0.5 * (cnr_posts[0] + cnr_posts[1]),
 	    cnr_posts[2] + [ 0,                             -rcy ],
 	    cnr_posts[2] + [ -sz[0] + frontedge_len - cutout_l_end_x, -cty ],
 	    cnr_posts[3] + [ 0,                             -cty ]