X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=floating-phases.scad;h=b4199188fc43951545e84dc91df57a95f7c532c1;hp=92e6b4ffc254de4e65d09a0992dcdadfea4af3c6;hb=f1824fce4c0b4420e0ba377d8d8a4e43e42e4a7d;hpb=f7215b968351467e0304a2f4b8ae35ce390770b3

diff --git a/floating-phases.scad b/floating-phases.scad
index 92e6b4f..b419918 100644
--- a/floating-phases.scad
+++ b/floating-phases.scad
@@ -12,9 +12,9 @@
 //	   "yellow",
 //	   ];
 //
-// Pause height		2.0
+// Pause height		z_pause value from caller
 // head park X		15
-// head park Y		260
+// head park Y		0
 // head move Z		1
 // min head park Z	1
 // retraction		1
@@ -23,10 +23,10 @@
 // when z pause occurs
 //   * set feed rate to 10% (or whatever minimum is)
 //   * press knob, printer will start
-//   * quickly select "stop"
+//   * quickly, press again, select "stop"
 //   * set temp
 //   * set feed rate back to 100%
-//   * now change filament etc.
+//   * now change filament etc., start next file
 
 include <utils.scad>
 
@@ -77,8 +77,8 @@ module FloatingPhaseFraming(phase, zmin) {
 
   tower_pos =
     -0.5 * frame_inner
-    + noz_gap * [1,0] * (phases-1 - phase)
-    + -[1,1] * tower_w;
+    + noz_gap * [1,0] * (phases - phase)
+    + -[1,0] * tower_w + 0.5 * [0,-1] * frame_w;
 
   // frame for alignment
   linear_extrude(height= th_l0)
@@ -99,3 +99,5 @@ module FloatingPhaseFraming(phase, zmin) {
       translate(tower_pos)
       square([1,1] * tower_w);
 }
+
+echo(str("SET PAUSE AT Z HEIGHT TO ",z_pause));