X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=fairphone-case.scad;h=678ea67cea016a48739b4046521647cdbf232690;hp=8d6fefea2875f4a78661f34af206777e4bd1567a;hb=bc23a479fc9ffbaff4d5303288492078fcf393c2;hpb=f0594d1fe8c09179d4b405851925672a08b87cb8 diff --git a/fairphone-case.scad b/fairphone-case.scad index 8d6fefe..678ea67 100644 --- a/fairphone-case.scad +++ b/fairphone-case.scad @@ -4,7 +4,6 @@ include phone = [ 75.0, 145.0 ]; -prop_x_pos = 24; prop_buildout_less = 3; prop_angles = [ 15, 30, 45, 60 ]; @@ -15,7 +14,18 @@ bumper = [ 0.250, -0.025 ]; enable_support = 1; +led_window_style = 3; +// 0: no window +// 1: simply an opening +// 2: opening with separate cover model, for printing in clear (two colour) +// 3: like 2 but one-layer window for ad-hoc multi-colour + +initial_layer_thick = 0.400; // ^ needed for mode 3 only +initial_layer_width = 0.750; // ^ needed for mode 3 only +multicolour_gap = 0.15; // each side + phone_cnr_rad = 6.0; +phone_rim_depth = 0.80; // includes allowance for a screen protector button_cutout_depth = 9; @@ -27,9 +37,13 @@ phone_backside_slope_outer = 1.0; // larger means shallower camera_pos_tl = [ 6.450, 12.750 ]; // measured from tl corner camera_pos_br = [ 22.300, 37.600 ]; // tl/br as seen from back -jack_pos = [ 14.38, 7.96 ]; +jack_pos = [ 13.83, 8.485 ]; jack_dia = 10.64 + .5; // some jack I had lying around +led_pos = [ 13.98, 10.00 ]; +led_aperture = 9; +led_window_ledge = 0.75; // each side + noisecancelmic_pos = [ 19.54, 7.37 ]; // from rhs noisecancelmic_dia = 4.00; @@ -44,10 +58,12 @@ microusb_below = 0.0; microusb_width = 16.12 + 1.25; case_th_bottom = 2.5; -case_th_lid = 2.5; +case_th_lid = 3.0; case_th_side = 2; case_th_lip = 1.2; +lid_screen_gap_extra = .66; + case_struts_count = 6; case_struts_solid_below = 1.00; case_struts_solid_above = 0.75; @@ -77,14 +93,25 @@ catch_slop = 0.50; foldover_gap = 0.50; foldover_lever_gap = 0.50; +// properties of the hinge fasteners hingescrew_shaft_dia = 2.0 + 0.25; // M2 x 12mm machine screw hingescrew_shaft_len = 12; -hingescrew_nut_thick = 1.93 + 0.20; // incl. washer -hingescrew_nut_dia = 4.72 + 0.50; // washer, actually +hingescrew_fasteners_extra_thick = 0.40; +// ^ amount of thread protruding if everything was completely nominal +// and we are using two nuts +hingescrew_nut_access_dia = 4.72 + 0.50; +// ^ washer is 4.72 dia +// also, want to get pliers or tiny spanner in to do up locknut +hingescrew_nut_across = 3.92 + 0.25; // incl. slop around recess slop +hingescrew_nut_thick = 1.93; hingescrew_head_th = 1.38 + 0.75; hingescrew_head_dia = 3.92; + +hingescrew_nut_recess_portion = 2/3; // portion of nut in recess + lever_cover_th = 0.75; hingemount_th = 2.5; +hingemount_wd = 4.8725; $fa = 5; $fs = 0.1; @@ -118,10 +145,13 @@ prop_recess_slop = 0.200; // each side prop_end_dia = 0.5; prop_main_th = 3; prop_taper_len = 6; -prop_main_width = 3; +prop_main_width = 4; prop_side_gap = 0.75; // each side +prop_lidrecess_behind = 0.75; prop_caserecess_behind = 0.75; -prop_caserecess_taper = 0.25; // each side +prop_caserecess_taper = 0.45; // one side only +prop_prop_gap = 0.5; +prop_prong_heel_slope = 0.5; // ---------- calculated ---------- @@ -130,6 +160,8 @@ phone_height = (phone + bumper*2)[1]; inside_br = [phone_width, -phone_height]; +prop_prong_h = prop_main_th; + //echo(camera_pos_tl + bumper, // camera_pos_br + bumper); @@ -167,7 +199,20 @@ kppa = [ kppb[0], kppf[1] ]; lpp10 = [ epp5[0] + lid_gap_x, kppc[1] + lid_gap_z ]; lpp11 = [ lpp10[0], epp5[1] + lid_gap_z ]; -lp_r12 = case_th_lid - (lpp11[1] - lpp10[1]); +lpp14 = lpp10 + [1,0] * keeper_inner_width; +// exact x posn not very important; must extend past end of keeper + +lpp15 = [ lpp14[0], + epp0[1] - phone_rim_depth + 1/2.5 * case_th_lid + + lid_screen_gap_extra ]; +// ^ beam theory says to maximise force before contact, +// the gap below the `beam' (the lid) must be 1/3 +// the thickness (ie the lid thickness) if the beam +// is solid, or 1/2 if it has a top and bottom only. +// ours is mostly solid. + +lp_r12 = max(case_th_lid - (lpp11[1] - lpp15[1]), + case_th_lip); lpp12 = [ epp4[0] + lp_r12, lpp11[1] ]; lpp13 = [ lpp12[0], lpp12[1] + lp_r12 ]; @@ -185,9 +230,22 @@ bppO = [ bppN[0], bppP[1] ]; bppL = lpp10 + [5,0]; bppK = [ bppL[0], bppN[1] ]; bppJ = [ bppN[0], bppL[1] ]; +bppU = [ bppJ[0], lpp12[1] ]; +bppV = lpp11; +bppW = lpp10; + +// notification led aperture + +nla_r0 = led_aperture/2; +nla_r1 = nla_r0 + led_window_ledge; +nla_r2 = nla_r1 + multicolour_gap; +nla_t = + led_window_style >= 3 ? initial_layer_thick : + led_window_style >= 2 ? led_window_ledge : 0; + // hinge plan -hp_rn = hingescrew_nut_dia/2; +hp_rn = hingescrew_nut_access_dia/2; hp_r2_min = hp_rn + lever_cover_th; hp_rs = hingescrew_shaft_dia/2; hp_r1_min = hp_rs + hingemount_th; @@ -210,19 +268,28 @@ hppE = [ hppE_x, hppE_y ]; // hinge elevation x coords -hingescrew_portion_len = - 0.5* (hingescrew_shaft_len - hingescrew_nut_thick - hinge_x_gap); - hex20 = max(epp2o[0], phone_cnr_rad, kppd[0] + hingescrew_head_th + keeper_gap_x_holes); -hex21 = hex20 + hingescrew_portion_len; +hex21 = hex20 + hingemount_wd; hex22 = hex21 + hinge_x_gap; -hex23 = hex22 + hingescrew_portion_len - - hingescrew_nut_thick; // bodge, need to divvy this up more sensibly -hex24 = hex20 + hingescrew_shaft_len + hinge_x_postscrew_gap; -//echo(hex20, hex21, hex22, hex23, hex24); -//echo(hingescrew_portion_len); +hex27 = hex20 + hingescrew_shaft_len; +hex24 = hex27 + hinge_x_postscrew_gap; +hex23 = hex27 - (hingescrew_nut_thick*2 + + hingescrew_fasteners_extra_thick); +hex26 = hex23 + hingescrew_nut_thick * 2/3; + +echo(hex20, hex21, hex22, hex23, hex24); +// 6, 10.8725, 10.9975, 13.74, 18.75 +module chk(act,exp) { + if (abs(act-exp) > 1e-9) echo("WRONG", act, exp); + else echo("ok", act); +} +chk(hex20, 6); +chk(hex21, 10.8725); +chk(hex22, 10.9975); +chk(hex23, 13.74); +chk(hex24, 18.75); // catch @@ -245,7 +312,9 @@ cppQ = [ cppR[0], cppV[1] - (catch_finger_height - cp_rQ) ]; cppF = [ cppV[0] + catch_finger_depth, cppC[1] ]; -// prop recess +// prop recess in case + +prop_x_pos = phone_width/2; prop_recess_hw = 0.5 * prop_main_width + prop_side_gap; @@ -255,15 +324,49 @@ prc_r3 = prc_r1 + prop_recess_slop; prcp2 = [ epp4[0] + prop_buildout_less, case_bottom_z ]; -prop_caserecess_buildout_r = prcp2[0] - epp2o[0]; +prop_caserecess_buildout_r = -1; // prcp2[0] - epp2o[0]; + +prcp1 = [ epp2o[0] + prc_r3 + prop_caserecess_behind, + epp2i[1] - prc_r3 - prop_recess_under]; -echo(prc_r3); +// prop recess in lid -prcp1 = [ prcp2[0] + prop_caserecess_behind + prc_r3, - epp2i[1] - prc_r3 ]; +prl_r10 = prop_end_dia/2; +prl_r10o = prl_r10 + prop_recess_slop; + +prlp10 = lpp10 + [1,1] * prl_r10o + + [1,0] * prop_lidrecess_behind + + [0,1] * prop_recess_under; + +// prop + +$prpp10 = [0,0]; +$prpp11 = [0, prop_taper_len]; + +$prp_r10 = prl_r10; // ---------- modules ---------- +module AdhocMultiprintFrame(phase, z0, zs) { + // from z0 to z0 + zs*layer + extra = phase * (initial_layer_width + multicolour_gap) + 5; + xextra = extra + -epp4[0]; + xrange = [ 0, phone_width ] + [-1,+1] * xextra; + yextra = extra + -epp4[0]; + yrange = [ -phone_height + +hppB[0] - hp_r2, 0 ] + [-1,+1] * yextra; + p0 = [ xrange[0], yrange[0] ]; + p1 = [ xrange[1], yrange[1] ]; + echo(p0, p1); + translate([0,0, z0]) + mirror([0,0, zs<0 ? 1 : 0]) + linear_extrude(height= initial_layer_thick) + difference(){ + rectfromto(p0 - [1,1] * initial_layer_width, + p1 + [1,1] * initial_layer_width); + rectfromto(p0, p1); + } +} + module KeeperProfile(slant=0){ use_e = kppe + [0,-1] * slant * keeper_inner_width / keeper_slant_slope; polygon([use_e, kppd, kppc, kppb, kppa, kppf]); @@ -290,7 +393,9 @@ module LidEdgeProfile(){ lpp12, lpp13, lpp13 + [10, 0], - lpp10 + [10, 0] + lpp15 + [10, 0], + lpp15, + lpp14, ]); intersection(){ circleat(lpp12, r=lp_r12); @@ -301,7 +406,10 @@ module LidEdgeProfile(){ module ButtonCoverProfile(){ intersection(){ - polygon([ bppM, bppP, bppO, bppJ, bppL, bppK ]); + polygon(concat([ bppM, bppP, bppO, bppJ ], + (enable_support && !$button_suppress_over_keeper + ? [ bppU, bppV, bppW ] : []), + [ bppL, bppK ])); hull(){ EdgeProfile(); LidEdgeProfile(); @@ -446,12 +554,13 @@ module CaseAperture(pos, dia, $fn) { h = 60); } -module SideButton(y, y_ref_sign, l){ +module SideButton(y, y_ref_sign, l, suppress_over_keeper=0){ // y_ref_sign: // +1 measured from top of actual phone to top of button // -1 measured from bottom of actual phone to bottom of button // 0 y is centre of button in coordinate system $button_l= l; + $button_suppress_over_keeper= suppress_over_keeper; eff_y = y_ref_sign > 0 ? -bumper [1] -y -l/2 : y_ref_sign < 0 ? (-phone -bumper)[1] +y +l/2 : y; @@ -466,9 +575,9 @@ module LidButtonishLeg(y, y_ref_sign, l=buttonishleg_default_l_is_fudge) { } module Buttons(){ - Flip_rhs(1) SideButton(15.580, +1, 8.9) children(); // power - Flip_rhs(1) SideButton(48.700, -1, 8.920) children(); // camera - Flip_rhs(0) SideButton(30.800, +1, 21.96) children(); // volume + Flip_rhs(1) SideButton(15.580, +1, 8.9 ) children(); // power + Flip_rhs(1) SideButton(48.700, -1, 8.920 ) children(); // camera + Flip_rhs(0) SideButton(30.800, +1, 21.96, 1) children(); // volume Flip_rhs( ) LidButtonishLeg(14, -1) children(); // Flip_rhs(0) LidButtonishLeg(20, +1, 20) children(); } @@ -564,19 +673,30 @@ module HingeLeverOuterProfile(){ } module HingeLeverInnerProfile(){ - for (c = [hppT, hppB]) { - hull() + for (s = [-1,+1]) { + c = s > 0 ? hppT : hppB; + translate(c) + mirror([0,0,s>0]) + rotate(s<0 ? -40 : 0) + hull() for (x=[-20,20]) - for (y=[0, c[1] - hppM[1]]) + for (y=[0, s * 10]) translate([x,y]) - circleat(c, hp_rn); + circle(hp_rn); } } -module Flip_hinge(){ +module HingeLeverNutProfile(){ + for (c= [hppB, hppT]) { + translate(c) + circle($fn=6, r= 0.5 * hingescrew_nut_across / cos(30)); + } +} + +module Flip_hinge(doflip=1){ hinge_origin = [0, -(phone_height - hppB[0]), hppB[1]]; translate(hinge_origin) - rotate([180,0,0]) + rotate([doflip*180,0,0]) translate(-hinge_origin) children(); } @@ -602,6 +722,102 @@ module CaseBase(){ EdgeProfile(); } +function prop_x(gamma) = hp_k / (2 * sin(gamma/2)) - hppT[0]; + +module PropProfileAssignments(gamma){ + // https://en.wikipedia.org/wiki/Solution_of_triangles#Two_sides_and_the_included_angle_given_(SAS) + x = prop_x(gamma); + p = phone_height + prlp10[0] - hppB[0]; + b = p + x; + + q = phone_height - hppT[0] - prcp1[0]; // $prpp7[0] is 0 by definition + a = q + x; + c = sqrt(a*a + b*b - 2*a*b*cos(gamma)); + $prp_alpha = acos( (b*b + c*c - a*a) / (2*b*c) ); + + $prp_theta = 90 - $prp_alpha; + beta = 180 - $prp_alpha - gamma; + psi = 90 - beta; + + //echo("abc", a,b,c); + + v1 = [ [ cos(psi), -sin(psi) ], // x + [ sin(psi), cos(psi) ] ]; // y + + $prpp7 = [0, c + (lpp13[1] - $prpp10[1] - hp_k) ]; + + $prp_r1 = prc_r1; + $prp_r11 = prop_main_th/2; + + $prpp1 = $prpp7 + [1,0] * + // this is approximate, but will do + (prop_main_th/2 + prop_prop_gap + prcp1[0] - cppA[0]); + $prpp3 = $prpp1 + + v1[0] * -$prp_r1 + + v1[1] * ((prcp2[1] - prcp1[1]) - prop_prop_gap); + $prpp12 = $prpp3 + v1[0] * + (prop_end_dia + prop_caserecess_taper * ($prpp1[1] - $prpp3[1])); + $prp_r8 = prop_main_th; + $prpp4 = [ prop_main_th/2, $prpp3[1] ]; + $prp_r5 = $prp_r8; + $prpp5 = [ $prpp12[0] - $prp_r5, + $prpp3[1] - prop_prong_h + $prp_r5 ]; + $prpp6 = $prpp4 + [0,-1] * (prop_prong_h + + prop_prong_heel_slope * ($prpp5[0] - $prpp4[0])); + $prpp8 = $prpp4 + [0,-1] * $prp_r8; + $prpp9 = $prpp8 + [-1,0] * $prp_r8; + + children(); +} + +module PropProfile(gamma, cut=0, rot=0){ ////toplevel + PropProfileAssignments(gamma){ + + //#circleat($prpp3,1); + //#circleat($prpp12,1); + + if (!cut) { + hull(){ + translate($prpp8) + intersection(){ + circle($prp_r8); + polygon([[-20,-0], [20,20], [0,0]]); + } + rectfromto($prpp6, $prpp9); + translate($prpp5) intersection(){ + circle($prp_r5); + polygon([[-10,-10], [0,0], [10,0]]); + } + rectfromto($prpp12 + [0,-0.1], $prpp3); + } + hull(){ + circleat($prpp1, $prp_r1); + rectfromto($prpp12 + [0,-0.1], $prpp3); + } + } + // main shaft + rotate([0,0, rot*-$prp_theta]){ + hull(){ + extra = cut ? prop_recess_slop : 0; + rectfromto($prpp6, $prpp9); + circleat($prpp11, $prp_r11 + extra); + circleat($prpp10, $prp_r10 + extra); + } + } + } +} + +module PropAggregateProfile(){ + for (angle = prop_angles) + PropProfile(angle, 0,0); +} + +module Prop(){ ////toplevel + hw = prop_main_width/2; + linextr(-hw, +hw) + PropAggregateProfile(); +} + module Case(){ ////toplevel difference(){ union(){ @@ -625,7 +841,7 @@ module Case(){ ////toplevel HingePortion(hex20, hex21) HingeBaseProfile(); // buildout for prop recess - Flip_rhs(1) + if (prop_caserecess_buildout_r > 0) Flip_rhs(1) linextr(case_bottom_z, epp2i[1]) hull() { for (dxs = [-1,+1]) @@ -665,7 +881,7 @@ module Case(){ ////toplevel translate([phone_width/2, -400, kppe[1]]) mirror([1-abs($rhsflip - keeper_side),0,0]) cube([400, 800, 50]); - if (enable_support) + if (enable_support && !$button_suppress_over_keeper) rotate([-90,90,0]) translate([-400, -400, kppd[1]]) mirror([0,0,1]) @@ -705,9 +921,9 @@ module Case(){ ////toplevel // prop recess Flip_rhs(1) translate([prop_x_pos,0,0]) + mirror([0,1,0]) rotate([90,0,90]) linextr(-prop_recess_hw, +prop_recess_hw) - mirror([1,0]) hull(){ for (d=[ [0,0], [0,-1], [+1,-1/prop_caserecess_taper] ]) circleat(prcp1 + 20*d, @@ -716,6 +932,12 @@ module Case(){ ////toplevel } } +module LidAdhocMultiprintFrame(phase){ + if (led_window_style >= 3) { + AdhocMultiprintFrame(phase, lpp13[1], -1); + } +} + module Lid(){ ////toplevel difference(){ union(){ @@ -747,7 +969,29 @@ module Lid(){ ////toplevel // screw holes in the hinge arms HingeScrews(); - } + + // prop recess + translate([prop_x_pos, -prlp10[0], prlp10[1]]) + mirror([0,1,0]) + rotate([90,0,90]) + linextr(-prop_recess_hw, +prop_recess_hw) + hull() + for (pa = prop_angles) + PropProfile(pa, 1,1); + + // notification led aperture + if (led_window_style) + translate([led_pos[0], -led_pos[1], lpp13[1]]) { + translate([0,0,-10]) + cylinder(r=nla_r0, h=20); + if (led_window_style >= 2) + translate([0,0, -nla_t]) + cylinder(r=nla_r2, height=20); + } + + } + + LidAdhocMultiprintFrame(1); } module HingeLever(){ ////toplevel @@ -757,9 +1001,13 @@ module HingeLever(){ ////toplevel HingeLeverOuterProfile(); // space for the screws - HingePortion(hex23, hex24) + HingePortion(hex26, hex24) HingeLeverInnerProfile(); + // recesses for the nuts + HingePortion(hex23, hex26+1) + HingeLeverNutProfile(); + // bores for the screws HingeScrews(); @@ -769,8 +1017,36 @@ module HingeLever(){ ////toplevel } } +module LidWindow(){ ////toplevel + translate([led_pos[0], -led_pos[1], lpp13[1]]) + mirror([0,0,1]) + cylinder(r= nla_r1, h=nla_t); + LidAdhocMultiprintFrame(0); +} + +module LidWindowPrint(){ ////toplevel + rotate([0,180,0]) + LidWindow(); +} + +module DemoLidWindowSelect(){ + translate([led_pos[0], led_pos[1], -100]) { + translate([0, -30, 0]) cube([400, 400, 200]); + } +} + +module DemoLidWindow(){ ////toplevel + %Lid(); + LidWindow(); + translate([0,40,0]){ + color("blue") intersection(){ Lid(); DemoLidWindowSelect(); } + color("red") intersection(){ LidWindow(); DemoLidWindowSelect(); } + } +} + module HingeLeverPrint(){ ////toplevel - rotate([90,0,0]) + rotate([-90,0,0]) + translate([-phone_width/2, phone_height, 0]) HingeLever(); } @@ -875,19 +1151,6 @@ module LidPrint(){ ////toplevel Lid(); } -module TestSelectPropRecesses(posns){ - linextr(-100,100){ - translate([phone_width/2, -phone_height]){ - square([ 3, 500 ], center=true); - for (y=posns) - hull() - for (dy=[ -prp5[0], -prp2[0] ]) - translate([0,y+dy]) - square([prop_main_width+5, 5], center=true); - } - } -} - module TestSelectFrame(){ include = [1,-1] * (epp2i[0] + 4); @@ -901,7 +1164,8 @@ module TestSelectFrame(){ module TestSelectLidFrame(){ TestSelectFrame(); - TestSelectPropRecesses(prop_lid_posns); + translate([led_pos[0], -led_pos[1], -50]) + cylinder(r= nla_r2+3, h=100); } module TestFrameCase(){ ////toplevel @@ -915,6 +1179,36 @@ module TestFrameCase(){ ////toplevel } } +module TestSelectTopApertures(){ + translate([-100, -35, -100]) + cube([400, 100, 200]); + LidAdhocMultiprintFrame(0); + LidAdhocMultiprintFrame(1); +} + +module TestTopApertures(){ ////toplevel + intersection(){ + Case(); + TestSelectFrame(); + TestSelectTopApertures(); + } +} + +module TestLidTopAperturesPrint(){ ////toplevel + rotate([0,180,0]) intersection(){ + Lid(); + TestSelectLidFrame(); + TestSelectTopApertures(); + } +} + +module TestLidWindowTopAperturesPrint(){ ////toplevel + rotate([0,180,0]) intersection(){ + LidWindow(); + TestSelectTopApertures(); + } +} + module TestFrameLidPrint(){ ////toplevel rotate([0,180,0]) intersection(){ Lid(); @@ -944,6 +1238,59 @@ module HingeScrews(){ } } +module DemoPropAngleSelect(c){ + color(c) difference(){ + union(){ children(); } + translate([ prop_x_pos, -400, -200 ]) + cube([ 400,800,400 ]); + } +} + +module DemoPropAngle(ang){ + hL = [0, -(phone_height - hppT[0]), hppT[1] - hp_k*2]; + hC = [0, -(phone_height - hppB[0]), hppB[1]]; + + translate(hL) + rotate([ang/2,0,0]) + translate(-hL) + translate(hC) + rotate([ang/2,0,0]) + translate(-hC) { + DemoPropAngleSelect("red") Case(); + + color("orange") + translate([prop_x_pos, -prcp1[0], prcp1[1]]) + PropProfileAssignments(ang) { + echo($prpp1); + rotate([-$prp_theta, 0, 0]) + translate([0, $prpp1[0], -$prpp1[1]]) + rotate([90,0,-90]) + Prop(); + } + } + + translate([0,0, -hp_k*2]) + DemoPropAngleSelect("blue") + Lid(); +} + +module DemoPropAngles(){ ////toplevel + for (i=[0 : len(prop_angles)-1]) + translate(i * [0, -100, 100]) + DemoPropAngle(prop_angles[i]); +} + +module DemoSelectAdhocLeftRight(right=0) { + translate([phone_width/2, -400, -100]) // , -15, -100 to cross-section + mirror([1-right, 0,0]) + cube([400, 800, 200]); +} + +module DemoLeft(){ ////toplevel + color("red") intersection(){ Case(); DemoSelectAdhocLeftRight(); } + color("blue") intersection(){ Lid(); DemoSelectAdhocLeftRight(); } +} + module DemoFrame(){ ////toplevel color("red") TestFrameCase(); color("blue") intersection(){ Lid(); TestSelectLidFrame(); } @@ -963,9 +1310,11 @@ module DemoHingedFrame(){ ///toplevel } module DemoHinge(){ ////toplevel - DemoFrame(); - translate([0,0, -hp_k*3]) - DemoHingedFrame(); + translate([ -0.5*phone_width, phone_height, hp_k*3 ]) { + DemoFrame(); + translate([0,0, -hp_k*3]) + DemoHingedFrame(); + } } module DemoProfiles(){ ////toplevel @@ -999,7 +1348,25 @@ module DemoProfiles(){ ////toplevel color("blue") HingeLidProfile(); color("red") HingeBaseProfile(); color("black") translate([0,0,-2]) HingeLeverOuterProfile(); - color("orange") translate([0,0,-1]) HingeLeverInnerProfile(); + } + + for (f=[0,1]) { + translate([-30, -60 + 30*f]) { + translate([0,0,-4]) EdgeProfile(); + %translate([0,0,-10]) HingeBaseProfile(); + translate([0,-2] * f * hp_k) { + translate([0,0,-4]) LidEdgeProfile(); + %translate([0,0,-10]) %HingeLidProfile(); + } + translate(+hppB) rotate([0,0,180*f]) translate(-hppB) { + translate([0,0,-2]) color("black") HingeLeverOuterProfile(); + translate([0,0,0]) color("red") difference(){ + HingeLeverOuterProfile(); + HingeLeverInnerProfile(); + } + translate([0,0,3]) color("yellow") HingeLeverNutProfile(); + } + } } translate([20,-30]) { @@ -1009,6 +1376,19 @@ module DemoProfiles(){ ////toplevel color("blue") CatchCatchProfile(); color("red") difference(){ EdgeProfile(); CatchCutProfile(); } } + + translate([40,-30]) { + difference(){ + LidEdgeProfile(); + translate(prlp10) + PropProfile(10, 1, 0); + } + translate(prlp10) + PropProfile(15, 0); + } + translate([60,-30]) { + PropAggregateProfile(); + } } //EdgeProfile();