X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=fairphone-case.scad;h=59dd894fcbad25d60300a7c8a5513d56b0192cb0;hp=94f3b25948d5793e0b81731aa2f28ff016652f4f;hb=d7aca80e53472fca75c92aa8d07221e9e79c5963;hpb=8b5a0f561c1bb4906ebae69f6acfb5fcb7dbca03 diff --git a/fairphone-case.scad b/fairphone-case.scad index 94f3b25..59dd894 100644 --- a/fairphone-case.scad +++ b/fairphone-case.scad @@ -1,17 +1,31 @@ // -*- C -*- -phone_height = 146.5 - .80; -phone_width = 76.75; +phone = [ 75.0, 145.0 ]; + +bumper = [ 0.250, 0.250 ]; +// ^ One side. Overall size is increased by twice this. +// If no bumpers, is the gap around the phone. phone_cnr_rad = 6.0; +button_cutout_depth = 9; + phone_edge_thick = 9.0; phone_total_thick = 12.0; phone_backside_slope_inner = 1.5; // larger means shallower phone_backside_slope_outer = 1.0; // larger means shallower -camera_pos_tl = [ 7.0, 13.0 ]; // measured from tl corner -camera_pos_br = [ 24.0, 39.5 ]; // tl/br as seen from back +camera_pos_tl = [ 6.450, 12.750 ]; // measured from tl corner +camera_pos_br = [ 22.300, 37.600 ]; // tl/br as seen from back + +jack_pos = [ 13.92, 7.96 ]; +jack_dia = 9.1 + .5; // some jack I had lying around + +noisecancelmic_pos = [ 19.54, 7.37 ]; // from rhs +noisecancelmic_dia = 1.75; + +rearspeaker_pos_bl = [ 14.92, 18.72 ]; +rearspeaker_size = [ 3.76, 7.36 ]; case_th_bottom = 2.5; case_th_lid = 2.5; @@ -19,14 +33,15 @@ case_th_side = 2; case_th_lip = 1.2; case_struts_count = 6; -case_struts_solid_below = 0.5; -case_struts_solid_above = 0.5; +case_struts_solid_below = 1.00; +case_struts_solid_above = 0.75; case_struts_width = 0.10; keeper_th_z = 0.75; keeper_th_x = 0.75; -keeper_inner_width = 1.75; -keeper_inner_height = 1.75; +keeper_inner_width = 2.75; +keeper_inner_height = 2.75; +keeper_slant_slope = 2; // larger means steeper keeper_gap_z_top = 0.25; keeper_gap_z_bot = 0.75; @@ -42,7 +57,26 @@ lid_lip = 1.75; $fa = 5; $fs = 0.1; -// calculated +button_l_fudge = 4.4; +buttonishleg_default_l_is_fudge = 10; + +strut_min_at_end = 1.5; + +rearspeaker_gap = [ 1.0, 1.0 ]; // each side + +// ---------- calculated ---------- + +phone_width = (phone + bumper*2)[0]; +phone_height = (phone + bumper*2)[1]; + +inside_br = [phone_width, -phone_height]; + +//echo(camera_pos_tl + bumper, +// camera_pos_br + bumper); + +// ----- could be changed ----- +lid_buttoncover_gap = lid_gap_x; +lid_buttoncover_overlap = case_th_lip + keeper_gap_z_top; phone_backside_slope_thick = phone_total_thick - phone_edge_thick; @@ -66,8 +100,23 @@ kppa = [ kppb[0], kppf[1] ]; lpp10 = [ epp5[0] + lid_gap_x, kppc[1] + lid_gap_z ]; lpp11 = [ lpp10[0], epp5[1] + lid_gap_z ]; -lpp12 = [ epp4[0] + lid_lip, lpp11[1] ]; -lpp13 = [ lpp12[0], lpp12[1] + lid_lip ]; + +lp_r12 = case_th_lid - (lpp11[1] - lpp10[1]); + +lpp12 = [ epp4[0] + lp_r12, lpp11[1] ]; +lpp13 = [ lpp12[0], lpp12[1] + lp_r12 ]; + +// button profile +bppM = epp4 + [0,5]; +bppN = [ 0.5 * (epp0[0] + epp4[0]), bppM[1] ]; +bppR = [ bppN[0] + lid_buttoncover_gap, -button_cutout_depth ]; +bppS = [ epp1[0], bppR[1] ]; +bppQ = [ bppM[0], bppR[1] - lid_buttoncover_overlap ]; +bppP = bppQ + [0,1] * lid_buttoncover_gap; +bppO = [ bppN[0], bppP[1] ]; +bppL = lpp10 + [5,0]; +bppK = [ bppL[0], bppN[1] ]; +bppJ = [ bppN[0], bppL[1] ]; module rectfromto(a,b) { ab = b - a; @@ -75,9 +124,15 @@ module rectfromto(a,b) { square([abs(ab[0]), abs(ab[1])]); } module circleat(c,r) { translate(c) circle(r); } +module linextr(z0,z1) { + translate([0,0,z0]) + linear_extrude(height=z1-z0) + children(); +} -module KeeperProfile(){ - polygon([kppe, kppd, kppc, kppb, kppa, kppf]); +module KeeperProfile(slant=0){ + use_e = kppe + [0,-1] * slant * keeper_inner_width / keeper_slant_slope; + polygon([use_e, kppd, kppc, kppb, kppa, kppf]); } module EdgeProfile(){ @@ -104,25 +159,81 @@ module LidEdgeProfile(){ lpp10 + [10, 0] ]); intersection(){ - circleat(lpp12, r=lid_lip); + circleat(lpp12, r=lp_r12); rectfromto( lpp12 + [-10, 0], lpp12 + [+10, +10] ); } } +module ButtonCoverProfile(){ + intersection(){ + polygon([ bppM, bppP, bppO, bppJ, bppL, bppK ]); + hull(){ + EdgeProfile(); + LidEdgeProfile(); + } + } +} + +module ButtonPlan(l, deep, cut){ + epsilon = + (cut ? 0 : lid_buttoncover_gap); + + delta = + (deep ? lid_buttoncover_overlap : 0); + + C = [0,0]; // by definition + T = [ 0, epp4[1] ]; + G = T + [0,10]; + + B0 = C + [0,-1] * button_cutout_depth; + B1 = B0 + [0,1] * epsilon; + + r0 = 0.5 * (T[1] - B0[1]); + A = [ -(l + button_l_fudge)/2 + r0, 0.5 * (T[1] + B0[1]) ]; + H = A + [0,-1] * delta; + + D = A + [-2,0] * r0; + F = D + [0,10]; + + E0 = 0.5 * (D + A); + E1 = E0 + [1,0] * epsilon; + + I0 = [ E0[0], H[1] ]; + I1 = [ E1[0], H[1] ]; + + hull(){ + for (m=[0,1]) mirror([m,0]) + circleat(H, r0 - epsilon); + } + for (m=[0,1]) mirror([m,0]) { + difference(){ + polygon([ E1, + I1, + H, + B1, + G, + F, + D + ]); + circleat(D, r0 + epsilon); + } + } +} + module CaseBase_rhsflip(yn=[0,1]) { - for (rhs=yn) { + for ($rhsflip=yn) { translate([phone_width/2, 0, 0]) - mirror([rhs,0,0]) + mirror([$rhsflip,0,0]) translate([-phone_width/2, 0, 0]) children(); } } -module CaseBase_botflip() { - for (bot=[0,1]) { +module CaseBase_botflip(yn=[0,1]) { + for ($botflip=yn) { translate([0, -phone_height/2, 0]) - mirror([0, bot, 0]) + mirror([0, $botflip, 0]) translate([0, phone_height/2, 0]) children(); } @@ -166,6 +277,61 @@ module AroundEdges(fill_zstart, fill_th, fill_downwards=0){ [phone_width, -phone_height] + [-1,+1] * phone_cnr_rad); } +module CaseAperture(pos, dia, $fn) { + theta = 180/$fn; + translate([ pos[0] + bumper[0], + -epp2i[0], + -pos[1] ]) + rotate([-90, theta, 0]) + cylinder(r = dia/2 / cos(theta), + h = 60); +} + +module SideButton(y, y_ref_sign, l){ + // y_ref_sign: + // +1 measured from top of actual phone to top of button + // -1 measured from bottom of actual phone to bottom of button + // 0 y is centre of button in coordinate system + $button_l= l; + eff_y = y_ref_sign > 0 ? -bumper [1] -y -l/2 : + y_ref_sign < 0 ? (-phone -bumper)[1] +y +l/2 : + y; + echo(eff_y); + translate([0, eff_y, 0]) + children(); +} + +module LidButtonishLeg(y, y_ref_sign, l=buttonishleg_default_l_is_fudge) { + $button_leg_only = true; + SideButton(y, y_ref_sign, l) children(); +} + +module Buttons(){ + CaseBase_rhsflip([1]) SideButton(15.580, +1, 8.9) children(); // power + CaseBase_rhsflip([1]) SideButton(48.700, -1, 8.920) children(); // camera + CaseBase_rhsflip([0]) SideButton(30.800, +1, 21.96) children(); // volume + CaseBase_rhsflip( ) LidButtonishLeg(20, -1) children(); +// CaseBase_rhsflip([0]) LidButtonishLeg(20, +1, 20) children(); +} + +module Struts(x_start, z_min, th){ + // if th is negative, starts at z_min and works towards -ve z + // and object should then be printed other way up + for (i= [1 : 1 : case_struts_count]) { + translate([0, + 0, + z_min]) + mirror([0,0, th<0 ? 1 : 0]) + translate([0, + -phone_height * i / (case_struts_count+1), + case_struts_solid_below]) + linear_extrude(height= abs(th) + -(case_struts_solid_below+case_struts_solid_above)) + rectfromto([ x_start, -0.5 * case_struts_width ], + [ phone_width - x_start, +0.5 * case_struts_width ]); + } +} + module CaseBase(){ AroundEdges(epp3[1], case_th_bottom, 1) EdgeProfile(); @@ -180,7 +346,7 @@ module Case(){ ////toplevel intersection(){ rotate([90, 0, 0]) linear_extrude(height = phone_height + phone_cnr_rad * 2) - KeeperProfile(); + KeeperProfile(1); // outline of the whole case, to stop it protruding translate([0,0, -25]) @@ -208,24 +374,67 @@ module Case(){ ////toplevel mirror([0, 0, 1]) linear_extrude(height = 20) mirror([0, 1, 0]) + translate(bumper) rectfromto(camera_pos_tl, camera_pos_br); // struts (invisible, because they're buried in the case) - for (i= [1 : 1 : case_struts_count]) { - translate([0, - -phone_height * i / (case_struts_count+1), - epp2i[1] - case_th_bottom + case_struts_solid_below]) - linear_extrude(height= case_th_bottom - -(case_struts_solid_below+case_struts_solid_above)) - rectfromto([ epp2i[0], -0.5 * case_struts_width ], - [ phone_width - epp2i[0], +0.5 * case_struts_width ]); + Struts(epp2i[0], epp2i[1] - case_th_bottom, case_th_bottom); + + Buttons(){ + mirror([1,0,0]) + rotate([90,0,90]) { + intersection(){ + translate([0,0,-10]) + linear_extrude(height= 20) + ButtonPlan($button_l, 0,1); + if ($button_leg_only) + rotate([-90,90,0]) + translate([phone_width/2, -400, kppe[1]]) + mirror([$rhsflip,0,0]) cube([400, 800, 50]); + } + translate([0,0, -bppR[0]]) + linear_extrude(height= 20) + ButtonPlan($button_l, 1,1); + } } + + // apertures along top edge + CaseAperture(jack_pos, jack_dia, 8); + CaseBase_rhsflip([1]) + CaseAperture(noisecancelmic_pos, noisecancelmic_dia, 20); + + // rear speaker + CaseBase_rhsflip([1]) CaseBase_botflip([1]) + linextr(-20, 20) + mirror([0,1]) + translate(rearspeaker_pos_bl + bumper) + rectfromto(-rearspeaker_gap, + rearspeaker_size + rearspeaker_gap); } } module Lid(){ ////toplevel - AroundEdges(lpp10[1], lpp13[1] - lpp10[1], 0) - LidEdgeProfile(); + difference(){ + union(){ + AroundEdges(lpp10[1], lpp13[1] - lpp10[1], 0) + LidEdgeProfile(); + + // button covers + Buttons(){ + intersection(){ + rotate([90,0,90]) + translate([0,0,-10]) + linear_extrude(height= 20) + ButtonPlan($button_l, 1,0); + rotate([90,0,0]) + translate([0,0,-100]) + linear_extrude(height= 200) + ButtonCoverProfile(); + } + } + } + Struts(lpp10[0] + strut_min_at_end, lpp13[1], -case_th_lid); + } } module TestLength(){ ////toplevel @@ -236,27 +445,67 @@ module TestLength(){ ////toplevel } } +module TestSelectWidth(){ + translate([-30, -(phone_height - 25), -20]) + mirror([0, 1, 0]) + cube([200, 50, 40]); +} + module TestWidth(){ ////toplevel intersection(){ Case(); - translate([-30, -(phone_height - 25), -20]) - mirror([0, 1, 0]) - cube([200, 50, 40]); + TestSelectWidth(); } } +module TestLidWidthPrint(){ ////toplevel + rotate([0,180.0]) intersection(){ + Lid(); + TestSelectWidth(); + } +} + +module TestSelectCamera(){ + CaseBase_rhsflip(1) + translate([0,0,-25]) + linear_extrude(height = 50) + mirror([0, 1, 0]) + rectfromto([-20, -20], + camera_pos_br + bumper + [ 5, 5 ]); +} + +module TestSelectRearSpeaker(){ + CaseBase_rhsflip(1) CaseBase_botflip([1]) + linextr(-20,20) + mirror([0,1,0]) + translate(rearspeaker_pos_bl + bumper) + rectfromto(-(rearspeaker_gap + [40,2]), + rearspeaker_size + rearspeaker_gap + [2,2]); +} + module TestCamera(){ ////toplevel intersection(){ Case(); - CaseBase_rhsflip(1) - translate([0,0,-25]) - linear_extrude(height = 50) - mirror([0, 1, 0]) - rectfromto([-20, -20], - camera_pos_br + [ 5, 5 ]); + TestSelectCamera(); } } +module TestLidByCamera(){ ////toplevel + intersection(){ + Lid(); + TestSelectCamera(); + } +} + +module TestLidByCameraPrint(){ ////toplevel + rotate([180,0,0]) TestLidByCamera(); +} + +module DemoByCamera(){ ////toplevel + color("blue") TestLidByCamera(); + color("red") TestCamera(); +} + module OneKeeper(){ ////toplevel translate([0, -phone_cnr_rad, 0]) rotate([90, 0, 0]) @@ -269,15 +518,74 @@ module OneKeeperPrint(){ ////toplevel OneKeeper(); } +module LidPrint(){ ////toplevel + rotate([0,180,0]) + Lid(); +} + +module TestSelectFrame(){ + include = [1,-1] * (epp2i[0] + 4); + + difference(){ + cube(1000, center=true); + translate([0,0, -100]) + linear_extrude(height=200) + rectfromto(include, inside_br - include); + } +} + +module TestFrameCase(){ ////toplevel + intersection(){ + Case(); + union(){ + TestSelectFrame(); + TestSelectCamera(); + TestSelectRearSpeaker(); + } + } +} + +module TestFrameLidPrint(){ ////toplevel + rotate([0,0,180]) intersection(){ + Lid(); + TestSelectFrame(); + } +} + module Keeper(){ ////toplevel CaseBase_rhsflip() OneKeeper(); } +module ButtonPlanForDemo(z, deep, cut){ + translate([0,0,z]) + ButtonPlan(8, deep, cut); +} + module DemoProfiles(){ ////toplevel LidEdgeProfile(); %EdgeProfile(); KeeperProfile(); + translate([0,0,-1]) color("black") KeeperProfile(1); + + translate([20,0]) { + LidEdgeProfile(); + %EdgeProfile(); + + demopoint_QR = [ bppS[0], bppQ[1] - 0.1]; + + color("blue") ButtonCoverProfile(); + color("red") { + rectfromto(bppQ, demopoint_QR); + rectfromto(bppR, demopoint_QR); + } + } + + translate([-20,0]) { + color("black") ButtonPlanForDemo(-2, 0,1); + color("red" ) ButtonPlanForDemo(-4, 1,1); + color("blue") ButtonPlanForDemo(-6, 1,0); + } } //EdgeProfile();