X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=fairphone-case.scad;h=29f0a5c80045d426d59556073859da792eae8726;hp=c8448d70dd232987cea13ffbaf9bce0221c97f8b;hb=bf05e822414772486366965ac3af75716bc737c2;hpb=a41d57f823ff5408264a9b8a69c35de976dff473

diff --git a/fairphone-case.scad b/fairphone-case.scad
index c8448d7..29f0a5c 100644
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -40,7 +40,7 @@ camera_pos_br = [ 22.300, 37.600 ]; // tl/br as seen from back
 jack_pos = [ 13.83, 8.485 ];
 jack_dia = 10.64 + .5; // some jack I had lying around
 
-led_pos = [ 13.98, 9.18 ];
+led_pos = [ 13.98, 10.00 ];
 led_aperture = 8;
 led_window_ledge = 0.75; // each side
 
@@ -407,7 +407,8 @@ module LidEdgeProfile(){
 module ButtonCoverProfile(){
   intersection(){
     polygon(concat([ bppM, bppP, bppO, bppJ ],
-		   (enable_support ? [ bppU, bppV, bppW ] : []),
+		   (enable_support && !$button_suppress_over_keeper
+		    ? [ bppU, bppV, bppW ] : []),
 		   [ bppL, bppK ]));
     hull(){
       EdgeProfile();
@@ -553,12 +554,13 @@ module CaseAperture(pos, dia, $fn) {
 	     h = 60);
 }
 
-module SideButton(y, y_ref_sign, l){
+module SideButton(y, y_ref_sign, l, suppress_over_keeper=0){
   // y_ref_sign:
   //   +1  measured from top    of actual phone to top    of button
   //   -1  measured from bottom of actual phone to bottom of button
   //    0  y is centre of button in coordinate system
   $button_l= l;
+  $button_suppress_over_keeper= suppress_over_keeper;
   eff_y = y_ref_sign > 0 ?         -bumper [1] -y -l/2 :
 	  y_ref_sign < 0 ? (-phone -bumper)[1] +y +l/2 :
 	  y;
@@ -879,7 +881,7 @@ module Case(){ ////toplevel
 		translate([phone_width/2, -400, kppe[1]])
 		mirror([1-abs($rhsflip - keeper_side),0,0])
 		cube([400, 800, 50]);
-	    if (enable_support)
+	    if (enable_support && !$button_suppress_over_keeper)
 	      rotate([-90,90,0])
 	      translate([-400, -400, kppd[1]])
 		mirror([0,0,1])
@@ -1257,6 +1259,17 @@ module DemoPropAngles(){ ////toplevel
     DemoPropAngle(prop_angles[i]);
 }
 
+module DemoSelectAdhocLeftRight(right=0) {
+  translate([phone_width/2, -400, -100]) // , -15, -100  to cross-section
+    mirror([1-right, 0,0])
+    cube([400, 800, 200]);
+}
+
+module DemoLeft(){ ////toplevel
+  color("red")  intersection(){ Case(); DemoSelectAdhocLeftRight(); }
+  color("blue") intersection(){ Lid();  DemoSelectAdhocLeftRight(); }
+}
+
 module DemoFrame(){ ////toplevel
   color("red") TestFrameCase();
   color("blue") intersection(){ Lid(); TestSelectLidFrame(); }