X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=reprap-play.git;a=blobdiff_plain;f=fairphone-case.scad;h=04fb14b4ac42494d2e6a2ab85c1b4369c32b3f5e;hp=ac49be5cb0694d5a34d33f64a57153a4d806f4b3;hb=e7bceb26b86659e50d9ebf2bfa533afaad5abe58;hpb=8c8a772b058b2b3383dfad332360ed18de2c1f34

diff --git a/fairphone-case.scad b/fairphone-case.scad
index ac49be5..04fb14b 100644
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -28,7 +28,7 @@ noisecancelmic_dia = 1.75;
 
 fingerpushhole_dias = [ 14, 17 ];
 
-rearspeaker_pos_bl = [ 14.92, 18.72 ];
+rearspeaker_pos_bl = [ 12.64, 18.72 ];
 rearspeaker_size   = [  3.76,  7.36 ];
 
 case_th_bottom = 2.5;
@@ -529,6 +529,9 @@ module Case(){ ////toplevel
         HingeLidProfile();
 	circle(r= hinge_r_arms_gap, $fn= 8);
       }
+
+    // screw holes in the hinge arms
+    DemoHingeScrews();
   }
 }
 
@@ -556,6 +559,9 @@ module Lid(){ ////toplevel
       HingePortion(hex20, hex21) HingeLidProfile();
     }
     Struts(lpp10[0] + strut_min_at_end, lpp13[1], -case_th_lid);
+
+    // screw holes in the hinge arms
+    DemoHingeScrews();
   }
 }
 
@@ -568,9 +574,17 @@ module HingeLever(){ ////toplevel
     // space for the screws
     HingePortion(hex23, hex24)
       HingeLeverInnerProfile();
+
+    // bores for the screws
+    DemoHingeScrews();
   }
 }
 
+module HingeLeverPrint(){ ////toplevel
+  rotate([90,0,0])
+    HingeLever();
+}
+
 module TestSelectLength(){
   translate([-30, -200, -20])
     cube([30 + 15, 250, 40]);
@@ -695,7 +709,7 @@ module TestFrameCase(){ ////toplevel
 }
 
 module TestFrameLidPrint(){ ////toplevel
-  rotate([0,0,180]) intersection(){
+  rotate([0,180,0]) intersection(){
     Lid();
     TestSelectFrame();
   }
@@ -718,9 +732,11 @@ module DemoHingeScrews(){
 		  -c[0],
 		  c[1] ]){
 	rotate([0,90,0])
-	  translate([0,0,-.1])
-	  cylinder( r= hingescrew_shaft_dia/2, h = hingescrew_shaft_len+0.1 );
+	  translate([0,0,-.2])
+	  cylinder( r= hingescrew_shaft_dia/2,
+		    h = hingescrew_shaft_len+0.2 );
 	rotate([0,-90,0])
+	  translate([0,0,+.1])
 	  cylinder( r= hingescrew_head_dia/2, h = hingescrew_head_th );
       }
   }