sewing-table: Start on real tiles

[reprap-play.git] / trackpump-mutlihead-clip.scad

diff --git a/trackpump-mutlihead-clip.scad b/trackpump-mutlihead-clip.scad
index 5521392030984283a2ebe71eba6394cad63bc6a4..c5108fd39cb5fc88e0f7fc1d64fed5f4a69fa375 100644 (file)
--- a/trackpump-mutlihead-clip.scad
+++ b/trackpump-mutlihead-clip.scad
@@ -1,5 +1,7 @@
 // -*- C -*-
 
+include <commitid.scad>
+
 pump_main_dia = 38;
 pump_side_width = 5;
 pump_side_thick = 4;
@@ -42,7 +44,7 @@ module PumpSidePlan() {
     union(){
       intersection(){
        translate([-xm, 0]) circle(r=or);
-       translate([-(xm+or), -or]) square([xm+or, or*2]);
+//     translate([-(xm+or), -or]) square([xm+or, or*2]);
       }
     }
     translate([-xm-or, 0])
@@ -56,6 +58,7 @@ module PumpSideElevation(){
   x1 = x2 - pump_main_dia;
   x0 = x1 - pump_side_width;
   x2a = x2 - pump_protr_protr;
+  x4 = x2 + pump_side_width;
 
   z0 = 0;
   z1 = z0 - pump_side_thick;
@@ -73,33 +76,34 @@ module PumpSideElevation(){
     translate([x1,z2]) scale([1,arcy/arcx]) circle(r=arcx);
   }
 
-  translate([x2,z2a]) square([x3-x2, z0-z2a]);
+  translate([x2,z2a]) square([x4-x2, z0-z2a]);
 
   hull(){
-    translate([x2,z2a]) square([x3-x2, z2-z2a]);
+    translate([x2,z2a]) square([x4-x2, z2-z2a]);
     translate([x2a,z2b]) square([x3-x2a, z2a-z2b]);
   }
 }
 
 module PumpSide(){
   br = baseplate_width_rad;
-  brs = baseplate_width_rad/2;
+  brs = hose_side_stalk_width/2;
+  echo(brs);
 
   difference(){
     intersection(){
       translate([0,100,0])
        rotate([90,0,0])
-       linear_extrude(height=200)
+       linear_extrude(height=200, convexity=10)
        PumpSideElevation();
       union(){
        translate([0,0,-100])
-         linear_extrude(height=200)
+         linear_extrude(height=200, convexity=10)
          PumpSidePlan();
        // baseplate
        hull(){
          mirror([0,0,1])
            translate([-xm, -brs, 0])
-           cube([xm,
+           cube([pump_main_dia/2 + pump_side_width,
                  brs*2,
                  1]);
          translate([-xm, -br, -pump_side_total_height])
@@ -113,6 +117,13 @@ module PumpSide(){
                -(pump_side_thick + pump_side_height)])
       cylinder(r=pump_main_dia/2, h=200);
   }
+  rotate([0,0,180])
+    mirror([0,0,1])
+    translate([-0,
+              -br,
+              pump_side_total_height])
+    Commitid_BestCount_M([baseplate + pump_protr_protr,
+                         br*2]);
 }
 
 module HoseSidePlan(){
@@ -141,7 +152,7 @@ module HoseSidePlan(){
 
 module HoseSide(){
   mirror([0,0,1])
-    linear_extrude(height=hose_side_thick)
+    linear_extrude(height=hose_side_thick, convexity=10)
     HoseSidePlan();
 }
 
@@ -156,6 +167,7 @@ module ClipPrint(){
 }
 
 //PumpSidePlan();
+//PumpSideElevation();
 //PumpSide();
 //HoseSide();
 //Clip();