splitpin wip, pin seems good

[reprap-play.git] / splitpin.scad

diff --git a/splitpin.scad b/splitpin.scad
index 7120037a088668db33445931418bfc84bae03438..6ef5bb3bd9993fe00536f81ea15772f80e48c17f 100644 (file)
--- a/splitpin.scad
+++ b/splitpin.scad
@@ -6,45 +6,54 @@ tau = 6.28318530718;
 function deg2rad(deg) = deg/360 * tau;
 function rad2deg(rad) = rad/tau * 360;
 
-module SplitPin(w=1.5, holeminrad=4, thick=3, deviationrad=1.5,
-               mainlen=20, handlerad=10, handlelen=7){
+module SplitPin(w=1.5, holeminrad=3.5, thick=3, deviationrad=1.0,
+               mainlen=20, handlerad=10, handlelen=7) {
   spare = holeminrad - deviationrad - w;
   echo("splitpin spare",spare);
   %translate([0,mainlen+handlelen,0]) cylinder(r=spare, h=thick);
   %translate([0,mainlen,thick/2]) rotate([90,0,0])
      cylinder(r=holeminrad, h=thick);
 
-  bent_x0 = w*1.5;
-  bent_x1 = holeminrad;
-  bent_dx = bent_x1 - bent_x0;
-  bent_y1 = mainlen;
-  bent_dy = bent_y1;
-  bent_rad = (bent_dy / bent_dx) * bent_dy;
-  bent_subang = atan(bent_dx / bent_dy);
-  actual_mainlen = bent_rad * deg2rad(bent_subang);
-
+  bent_dx = holeminrad;
   unbent_dx = bent_dx + deviationrad;
-  unbent_subang = atan(unbent_dx / actual_mainlen);
-  unbent_rad = actual_mainlen / deg2rad(unbent_subang);
 
-  main_cx = w*1.5 + unbent_rad;
+  unbent_subang = atan(unbent_dx / mainlen);
+  unbent_rad = mainlen / deg2rad(unbent_subang);
+
+  corner_x = unbent_rad * (1 - cos(unbent_subang));
+  corner_y = unbent_rad * sin(unbent_subang);
+
+  main_cx = unbent_rad;
+
+//  translate([w*1.5, 0, 0]) {
+//    translate([corner_x, corner_y, 10]) %cube([10,10,10]);
+//    translate([bent_dx, 0, 10]) %cube([10,10,10]);
+//    translate([unbent_dx, 5, 10]) %cube([10,10,10]);
+//  }
 
   for (xmir=[0,1]) mirror([xmir,0,0]) {
     linear_extrude(height=thick) {
       FlatArc(0,0, w*0.5, w*1.5, 270-1,360);
-      FlatArc($fa=1, main_cx,0, unbent_rad, unbent_rad+w,
-             180-unbent_subang, 180);
-      translate([unbent_rad * (1 - cos(unbent_subang)) + w*1.5,
-                unbent_rad * sin(unbent_subang)])
-       rotate([0,0,-unbent_subang]) {
-       translate([-(w + deviationrad), -0.1])
-         square(size=[w + deviationrad, w+0.1]);
-       FlatArc(-deviationrad + handlerad, w,
-               handlerad, handlerad+w,
-               180-rad2deg(handlelen/handlerad), 180);
+      translate([w*1.5, 0, 0]) {
+       FlatArc($fa=1, main_cx,0, unbent_rad, unbent_rad+w,
+               180-unbent_subang, 180);
+       translate([corner_x, corner_y])
+         rotate([0,0,-unbent_subang]) {
+         translate([-(w + deviationrad), -0.1])
+           square(size=[w + deviationrad, w+0.1]);
+         FlatArc(-deviationrad + handlerad, w,
+                 handlerad, handlerad+w,
+                 180-rad2deg(handlelen/handlerad), 180,
+                 $fa=0.25, $fn=60);
+       }
       }
     }
   }
 }
 
+module SplitPinCavity(w=1.5, holeminrad=3.5, thick=3, deviationrad=1.0,
+                     mainlen=20) {
+  
+}
+
 SplitPin();