bike-lipo-box: rotate again so glands are at front for viewing while printing

[reprap-play.git] / slic3r-config.ini

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 3b920879130ec8c9e62b2cb66ec94eec8eb89c9c..c496b9171221ca15c619cb443e7c7a2ac7db9df8 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,8 +1,8 @@
-# generated by Slic3r 0.9.7 on Sun Dec 16 20:42:19 2012
+# generated by Slic3r 0.9.7 on Fri Dec 18 00:34:03 2015
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 100
-bottom_solid_layers = 3
+bed_temperature = 60
+bottom_solid_layers = 2
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -28,11 +28,11 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 90
+first_layer_bed_temperature = 60
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 215
+first_layer_temperature = 205
 g0 = 0
 gap_fill_speed = 20
 gcode_arcs = 0
@@ -51,7 +51,7 @@ min_print_speed = 10
 min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50
-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
@@ -76,7 +76,7 @@ skirts = 2
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
+solid_infill_below_area = 1
 solid_infill_every_layers = 0
 solid_infill_speed = 60
 start_gcode = G28 ; home all axes
@@ -91,7 +91,7 @@ support_material_threshold = 45
 temperature = 205
 threads = 8
 top_solid_infill_speed = 50
-top_solid_layers = 3
+top_solid_layers = 2
 travel_speed = 130
 use_relative_e_distances = 0
 vibration_limit = 0