filamenttrestle wip not use doveclip

[reprap-play.git] / slic3r-config.ini

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 885144d5d7df341c06d5aa939e46e5047bd64a97..83e5e4eb4b4be443ecb27eada433039a28bead5f 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,34 +1,34 @@
-# generated by Slic3r 0.9.1 on Sun Aug 12 22:17:48 2012
+# generated by Slic3r 0.9.1 on Sat Sep 29 18:43:37 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 60
+bed_temperature = 80
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 brim_width = 0
 complete_objects = 0
-cooling = 0
+cooling = 1
 disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
-end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
+end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 X0 Y0 F10000\nG28 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
 external_perimeter_speed = 100%
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1
+extrusion_multiplier = 0.9
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.77
 fill_angle = 45
-fill_density = 0.4
+fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 65
-first_layer_extrusion_width = 150%
+first_layer_bed_temperature = 70
+first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_temperature = 215
@@ -64,7 +64,7 @@ retract_restart_extra = 0
 retract_speed = 30
 rotate = 0
 scale = 1
-skirt_distance = 12
+skirt_distance = 3
 skirt_height = 1
 skirts = 2
 slowdown_below_layer_time = 15