velux-window-grip: MainLoopTest 2

[reprap-play.git] / slic3r-config.ini

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 20ddd7e474ff53deeda468a96b6f19ec4d48718b..2c38ddda2a34870a83de2fd830f1f2d42bc1af69 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,8 +1,8 @@
-# generated by Slic3r 0.9.7 on Mon Nov  4 22:25:35 2013
+# generated by Slic3r 0.9.7 on Sun May  4 00:21:18 2014
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 100
-bottom_solid_layers = 3
+bottom_solid_layers = 2
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -25,10 +25,10 @@ extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.77
-fill_angle = 45
+fill_angle = 0
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 90
+first_layer_bed_temperature = 100
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
@@ -51,13 +51,13 @@ min_print_speed = 10
 min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50
-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
 perimeter_extrusion_width = 100%
 perimeter_speed = 30
-perimeters = 4
+perimeters = 2
 post_process = 
 print_center = 70,70
 randomize_start = 1
@@ -91,7 +91,7 @@ support_material_threshold = 45
 temperature = 205
 threads = 8
 top_solid_infill_speed = 50
-top_solid_layers = 5
+top_solid_layers = 2
 travel_speed = 130
 use_relative_e_distances = 0
 vibration_limit = 0