keep some of our own settings

[reprap-play.git] / slic3r-config.ini

diff --git a/slic3r-config.ini b/slic3r-config.ini
index a753dd63d4172d82ef47f7071935bff07f25875d..26a96700870ba5b10bf15a22ec2328661c548df8 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -12,7 +12,7 @@ disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
 external_perimeter_speed = 100%
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -58,15 +58,15 @@ post_process =
 print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
-retract_length = 1
-retract_lift = 0
-retract_restart_extra = 0
+retract_length = 4.5
+retract_lift = 0.1
+retract_restart_extra = 0.1
 retract_speed = 30
 rotate = 0
 scale = 1
-skirt_distance = 6
+skirt_distance = 12
 skirt_height = 1
-skirts = 1
+skirts = 2
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
@@ -81,8 +81,8 @@ support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
 temperature = 190
-threads = 2
+threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130
 use_relative_e_distances = 0
-z_offset = 0
+z_offset = 0.0