slic3r-config, etc.: increase temperatures, restore extrusion multiplier, suitable...

[reprap-play.git] / slic3r-config.ini

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 794667c164cacab7514a512df38344836b649421..03cb4bdd2189cf98a3681dde23df5733414fa442 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.1 on Sun Oct 14 23:13:04 2012
+# generated by Slic3r 0.9.1 on Sat Nov 24 21:15:49 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 90
+bed_temperature = 100
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -19,7 +19,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 0.9
+extrusion_multiplier = 1.0
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 80
+first_layer_bed_temperature = 90
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%