sleepphone-cable-box: wip, try this

[reprap-play.git] / sleepphone-cable-box.scad

diff --git a/sleepphone-cable-box.scad b/sleepphone-cable-box.scad
index d422420967b9656e160dcba37bfe55456f047416..95fb6475ed972b6c766265f08746dd3f5a63e24f 100644 (file)
--- a/sleepphone-cable-box.scad
+++ b/sleepphone-cable-box.scad
@@ -5,7 +5,7 @@ include <funcs.scad>
 wall = 0.75 * [1,1,1];
 phone = [ 76.40, 30.96, 6.26 ]; // includes socket
 phone_button_z = 6.58;
-minwall = 0.25;
+minwall = 0.50;
 
 button_dy_outer = 28.42;
 button_dy_inner = 19.05;
@@ -28,6 +28,9 @@ plug_tooth_h = 0.5;
 plug_tooth_dy = 0.5;
 
 keeper_prong = 2;
+keeper_stalk_basewidth = 4;
+keeper_stalk_len = 70;
+keeper_stalk_gap = 2;
 
 // calculated
 
@@ -94,6 +97,14 @@ module PlugKeeperProfileHalf(){
   }
 }
 
+module PlugKeeperStalkProfile(){
+  hull(){
+    for (m=[0,1]) mirror([0,m,0]) PlugKeeperProfileHalf();
+    translate([ plugkeeper_x_maxw + keeper_stalk_len, 0,0 ])
+      square([ 0.1, keeper_stalk_basewidth/2 ], center=true);
+  }
+}
+
 module PlugKeeper(){
   for (m=[0,1]) mirror([0,m,0]) {
       translate([0,0, -wall[2]])
@@ -104,7 +115,12 @@ module PlugKeeper(){
        linear_extrude(height= plug_tooth_h)
        translate(plugkeeper_d_u * -plug_tooth_dy)
        PlugKeeperProfileHalf();
+
     }
+
+  translate([0,0, -wall[2]])
+    linear_extrude(height = wall[2])
+    PlugKeeperStalkProfile();
 }
 
 module Box(){
@@ -113,6 +129,11 @@ module Box(){
 
     translate([ led[0], phone[1]/2 - led[1], 1 ])
       cylinder(r = led_dia/2, h= phone[2]*2, $fn=20);
+
+    for (ys=[-1,+1])
+      translate([ -0.1, ys * keeper_stalk_gap, -wall[2]*2])
+       linear_extrude(height = wall[2]*3)
+       PlugKeeperStalkProfile();
   }
 
   PlugKeeper();