+module PlugKeeperProfileHalf(){
+ p_max = plugkeeper_p_max;
+ p_min = plugkeeper_p_min;
+ d = plugkeeper_d_u * keeper_prong;
+
+ translate([ plugkeeper_x_maxw, 0 ]) {
+ polygon([ p_min,
+ p_max,
+ p_max + d,
+ p_min + d ]);
+ }
+}
+
+module PlugKeeperStalkProfile(){
+ hull(){
+ for (m=[0,1]) mirror([0,m,0]) PlugKeeperProfileHalf();
+ translate([ plugkeeper_x_maxw + keeper_stalk_len, 0,0 ])
+ square([ 0.1, keeper_stalk_basewidth ], center=true);
+ }
+}
+
+module PlugKeeper(){
+ for (m=[0,1]) mirror([0,m,0]) {
+ translate([0,0, -keeper_stalk_thick])
+ linear_extrude(height=plug_h + keeper_stalk_thick)
+ PlugKeeperProfileHalf();
+
+ translate([0, 0, plug_h - plug_tooth_h])
+ linear_extrude(height= plug_tooth_h)
+ translate(plugkeeper_d_u * -plug_tooth_dy)
+ PlugKeeperProfileHalf();
+
+ }
+}
+
+module Box(){
+ sidewall_cutout_z = phone[2] + phone_slop[2] + button_dz_outer;
+
+ difference(){
+ union(){
+ BoxMain();
+ Brace();
+ }
+
+ translate([ led[0], phone[1]/2 - led[1], 1 ])
+ rotate([0,0, 360/8/2])
+ cylinder(r = led_dia/2 / cos(360/8/2), h= phone[2]*2, $fn=8);
+
+ for (ys=[-1,+1]) {
+ translate([ -0.1, ys * keeper_stalk_gap, -wall[2]*2])
+ linear_extrude(height = wall[2]*3)
+ PlugKeeperStalkProfile();
+
+ translate([ phone[0] + wall[0],
+ ys * (cutout_between/2 + cutout_dia/2),
+ -10 ])
+ cylinder( r= cutout_dia/2, h = 50, $fn = 20 );
+
+ translate([expose, ys*phone[1]/2, sidewall_cutout_z/2])
+ rotate([90,0,0])
+ translate([0,0,-3])
+ cylinder( r= sidewall_cutout_z/2 - 0.1, h=6 , $fn=20 );
+ }
+ }
+
+ PlugKeeper();
+
+ translate([0,0, -keeper_stalk_thick])
+ linear_extrude(height = keeper_stalk_thick)
+ PlugKeeperStalkProfile();
+
+ translate([ plugkeeper_x_maxw + keeper_stalk_len +
+ -keeper_stalk_base_reinforce_len/2,
+ -keeper_stalk_basewidth/2,
+ 0 ])
+ mirror([0,0,1])
+ cube([ keeper_stalk_base_reinforce_len,
+ keeper_stalk_basewidth,
+ keeper_stalk_base_reinforce_thick ]);
+}
+
+module BoxPrint(){
+ // This makes' Cura's support more optimal: specifically,
+ // it then doesn't seem to touch the back (bottom) wall
+ translate([0,0,phone[0]])
+ rotate([0,90,0])
+ Box();
+}
+
+//MainProfileInnerHalf();
+//MainProfile();
+//translate([0,0,1]) color("black") BraceProfileInitial();
+//translate([0,0,1]) color("black") BraceProfileFinal();
+//Brace();
+//Box();
+BoxPrint();